On Wed, Feb 27, 2013 at 1:00 PM, Darin Vivekananad <didforsale5(a)gmail.com&gt; wrote: 1. Fedora Core 5 has been deprecate for ~6 years now. Your chances of getting help are fairly slim. 2. You didn't include the actual kernel panic message or what you were doing to trigger it. Without this information it's unlikely that anyone here will be able to help you. - Gilboa

Dell poweedge 2900 Here is demessg Warning: dmesg info Linux version 2.6.17-1.2187_FC5smp (brewbuilder(a)hs20-bc2-2.build.redhat.com) (gcc version 4.1.1 20060525 (Red Hat 4.1.1-1)) #1 SMP Mon Sep 11 01:32:34 EDT 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 0000000000100000 - 00000000cffa8000 (usable) BIOS-e820: 00000000cffa8000 - 00000000cffb7c00 (ACPI data) BIOS-e820: 00000000cffb7c00 - 00000000d0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000330000000 (usable) 12160MB HIGHMEM available. 895MB LOWMEM available. found SMP MP-table at 000fe710 NX (Execute Disable) protection: active On node 0 totalpages: 3342336 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 225279 pages, LIFO batch:31 HighMem zone: 3112961 pages, LIFO batch:31 DMI 2.4 present. Using APIC driver default ACPI: RSDP (v002 DELL ) @ 0x000f2a00 ACPI: XSDT (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x000f2a80 ACPI: FADT (v003 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x000f2b88 ACPI: MADT (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x000f2c7c ACPI: SPCR (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x000f2d5d ACPI: HPET (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x000f2dad ACPI: MCFG (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x000f2de5 ACPI: DSDT (v001 DELL PE_SC3 0x00000001 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:6 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) Processor #4 15:6 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) Processor #2 15:6 APIC version 20 ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) Processor #6 15:6 APIC version 20 ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) Processor #1 15:6 APIC version 20 ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) Processor #3 15:6 APIC version 20 ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) Processor #5 15:6 APIC version 20 ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) Processor #7 15:6 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x09] address[0xfec81000] gsi_base[64]) IOAPIC[1]: apic_id 9, version 32, address 0xfec81000, GSI 64-87 ACPI: IOAPIC (id[0x0a] address[0xfec84000] gsi_base[160]) IOAPIC[2]: apic_id 10, version 32, address 0xfec84000, GSI 160-183 ACPI: IOAPIC (id[0x0b] address[0xfec84800] gsi_base[224]) IOAPIC[3]: apic_id 11, version 32, address 0xfec84800, GSI 224-247 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 4 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at d1000000 (gap: d0000000:10000000) Built 1 zonelists Kernel command line: ro root=LABEL=/1 rhgb quiet mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) mapped IOAPIC to ffffb000 (fec81000) mapped IOAPIC to ffffa000 (fec84000) mapped IOAPIC to ffff9000 (fec84800) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c07ae000 soft=c078e000 PID hash table entries: 4096 (order: 12, 16384 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 12470348k/13369344k available (2154k kernel code, 111092k reserved, 1200k data, 244k init, 11665060k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. hpet0: at MMIO 0xfed00000 (virtual 0xf8800000), IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz Using HPET for base-timer Using HPET for gettimeofday Detected 2992.672 MHz processor. Using hpet for high-res timesource Calibrating delay using timer specific routine.. 5990.85 BogoMIPS (lpj=11981719) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e4bd 00000000 00000001 CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000e4bd 00000000 00000001 monitor/mwait feature present. using mwait in idle threads. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000e4bd 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (24) available CPU0: Thermal monitoring enabled Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code CPU0: Intel(R) Xeon(TM) CPU 3.00GHz stepping 04 SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 CPU 1 irqstacks, hard=c07af000 soft=c078f000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5985.08 BogoMIPS (lpj=11970169) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e4bd 00000000 00000001 CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000e4bd 00000000 00000001 monitor/mwait feature present. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000e4bd 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel P4/Xeon Extended MCE MSRs (24) available CPU1: Thermal monitoring enabled CPU1: Intel(R) Xeon(TM) CPU 3.00GHz stepping 04 SMP alternatives: switching to SMP code Booting processor 2/2 eip 3000 CPU 2 irqstacks, hard=c07b0000 soft=c0790000 Initializing CPU#2 Calibrating delay using timer specific routine.. 5985.34 BogoMIPS (lpj=11970685) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e4bd 00000000 00000001 CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000e4bd 00000000 00000001 monitor/mwait feature present. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000e4bd 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#2. CPU2: Intel P4/Xeon Extended MCE MSRs (24) available CPU2: Thermal monitoring enabled CPU2: Intel(R) Xeon(TM) CPU 3.00GHz stepping 04 SMP alternatives: switching to SMP code Booting processor 3/3 eip 3000 CPU 3 irqstacks, hard=c07b1000 soft=c0791000 Initializing CPU#3 Calibrating delay using timer specific routine.. 5985.34 BogoMIPS (lpj=11970694) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e4bd 00000000 00000001 CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000e4bd 00000000 00000001 monitor/mwait feature present. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000e4bd 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#3. CPU3: Intel P4/Xeon Extended MCE MSRs (24) available CPU3: Thermal monitoring enabled CPU3: Intel(R) Xeon(TM) CPU 3.00GHz stepping 04 SMP alternatives: switching to SMP code Booting processor 4/4 eip 3000 CPU 4 irqstacks, hard=c07b2000 soft=c0792000 Initializing CPU#4 Calibrating delay using timer specific routine.. 5985.21 BogoMIPS (lpj=11970424) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e4bd 00000000 00000001 CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000e4bd 00000000 00000001 monitor/mwait feature present. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU: Physical Processor ID: 1 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000e4bd 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#4. CPU4: Intel P4/Xeon Extended MCE MSRs (24) available CPU4: Thermal monitoring enabled CPU4: Intel(R) Xeon(TM) CPU 3.00GHz stepping 04 SMP alternatives: switching to SMP code Booting processor 5/5 eip 3000 CPU 5 irqstacks, hard=c07b3000 soft=c0793000 Initializing CPU#5 Calibrating delay using timer specific routine.. 5985.27 BogoMIPS (lpj=11970541) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e4bd 00000000 00000001 CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000e4bd 00000000 00000001 monitor/mwait feature present. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU: Physical Processor ID: 1 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000e4bd 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#5. CPU5: Intel P4/Xeon Extended MCE MSRs (24) available CPU5: Thermal monitoring enabled CPU5: Intel(R) Xeon(TM) CPU 3.00GHz stepping 04 SMP alternatives: switching to SMP code Booting processor 6/6 eip 3000 CPU 6 irqstacks, hard=c07b4000 soft=c0794000 Initializing CPU#6 Calibrating delay using timer specific routine.. 5985.38 BogoMIPS (lpj=11970763) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e4bd 00000000 00000001 CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000e4bd 00000000 00000001 monitor/mwait feature present. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU: Physical Processor ID: 1 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000e4bd 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#6. CPU6: Intel P4/Xeon Extended MCE MSRs (24) available CPU6: Thermal monitoring enabled CPU6: Intel(R) Xeon(TM) CPU 3.00GHz stepping 04 SMP alternatives: switching to SMP code Booting processor 7/7 eip 3000 CPU 7 irqstacks, hard=c07b5000 soft=c0795000 Initializing CPU#7 Calibrating delay using timer specific routine.. 5985.21 BogoMIPS (lpj=11970432) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e4bd 00000000 00000001 CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000e4bd 00000000 00000001 monitor/mwait feature present. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU: Physical Processor ID: 1 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000e4bd 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#7. CPU7: Intel P4/Xeon Extended MCE MSRs (24) available CPU7: Thermal monitoring enabled CPU7: Intel(R) Xeon(TM) CPU 3.00GHz stepping 04 Total of 8 processors activated (47887.71 BogoMIPS). ENABLING IO-APIC IRQs .TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization across 8 CPUs: passed. Brought up 8 CPUs migration_cost=8000,8000 checking if image is initramfs... it is Freeing initrd memory: 1078k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG Setting up standard PCI resources ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: PXH quirk detected, disabling MSI for SHPC device PCI: PXH quirk detected, disabling MSI for SHPC device PCI: PXH quirk detected, disabling MSI for SHPC device Boot video device is 0000:11:0d.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST.DWN1._ PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST.DWN2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3.PE2P._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6.PXHA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6.PXHB._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBEX._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 *5 6 7 10 11 12) ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 10 *11 12) ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 5 6 7 *10 11 12) ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 *11 12) ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 *6 7 10 11 12) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 12 devices usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:08: ioport range 0x800-0x87f could not be reserved pnp: 00:08: ioport range 0x880-0x8bf has been reserved pnp: 00:08: ioport range 0x8c0-0x8df has been reserved pnp: 00:08: ioport range 0x8e0-0x8e3 has been reserved pnp: 00:08: ioport range 0xc00-0xc7f has been reserved pnp: 00:08: ioport range 0xca0-0xca7 has been reserved pnp: 00:08: ioport range 0xca9-0xcab has been reserved pnp: 00:08: ioport range 0xcad-0xcaf has been reserved pnp: 00:09: ioport range 0xca8-0xca8 has been reserved pnp: 00:09: ioport range 0xcac-0xcac has been reserved PCI: Bridge: 0000:07:00.0 IO window: disabled. MEM window: f4000000-f7ffffff PREFETCH window: disabled. PCI: Bridge: 0000:06:00.0 IO window: disabled. MEM window: f4000000-f7ffffff PREFETCH window: disabled. PCI: Bridge: 0000:06:01.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:05:00.0 IO window: disabled. MEM window: f4000000-f7ffffff PREFETCH window: disabled. PCI: Bridge: 0000:05:00.3 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:02.0 IO window: disabled. MEM window: f2000000-f7ffffff PREFETCH window: disabled. PCI: Bridge: 0000:01:00.0 IO window: e000-efff MEM window: fc500000-fc6fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:03.0 IO window: e000-efff MEM window: fc400000-fc6fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:04.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:05.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:0d:00.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:0d:00.2 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:06.0 IO window: disabled. MEM window: fc300000-fc3fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:07.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:03:00.0 IO window: disabled. MEM window: f8000000-fbffffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: f8000000-fbffffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: d000-dfff MEM window: fc100000-fc2fffff PREFETCH window: d8000000-dfffffff ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:02.0 to 64 ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:05:00.0 to 64 ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:06:00.0 to 64 PCI: Setting latency timer of device 0000:07:00.0 to 64 ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:06:01.0 to 64 PCI: Setting latency timer of device 0000:05:00.3 to 64 ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:03.0 to 64 PCI: Setting latency timer of device 0000:01:00.0 to 64 ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:04.0 to 64 PCI: Setting latency timer of device 0000:00:05.0 to 64 ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:06.0 to 64 PCI: Setting latency timer of device 0000:0d:00.0 to 64 PCI: Setting latency timer of device 0000:0d:00.2 to 64 PCI: Setting latency timer of device 0000:00:07.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1c.0 to 64 PCI: Setting latency timer of device 0000:03:00.0 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 9, 2621440 bytes) TCP bind hash table entries: 65536 (order: 8, 1310720 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered apm: BIOS not found. audit: initializing netlink socket (disabled) audit(1361778047.676:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 9E8FFDD49649098E - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:02.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:02.0:pcie00] Allocate Port Service[0000:00:02.0:pcie01] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:03.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:03.0:pcie00] Allocate Port Service[0000:00:03.0:pcie01] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:04.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:04.0:pcie00] Allocate Port Service[0000:00:04.0:pcie01] PCI: Setting latency timer of device 0000:00:05.0 to 64 pcie_portdrv_probe->Dev[25e5:8086] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:05.0:pcie00] Allocate Port Service[0000:00:05.0:pcie01] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:06.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:06.0:pcie00] Allocate Port Service[0000:00:06.0:pcie01] PCI: Setting latency timer of device 0000:00:07.0 to 64 pcie_portdrv_probe->Dev[25e7:8086] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:07.0:pcie00] Allocate Port Service[0000:00:07.0:pcie01] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie03] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:05:00.0 to 64 Allocate Port Service[0000:05:00.0:pcie10] Allocate Port Service[0000:05:00.0:pcie11] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:06:00.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:06:00.0:pcie20] Allocate Port Service[0000:06:00.0:pcie21] ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:06:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:06:01.0:pcie20] Allocate Port Service[0000:06:01.0:pcie21] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ESB2: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 169 ESB2: chipset revision 9 ESB2: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio Probing IDE interface ide0... hda: TEAC CD-ROM CD-224E-N, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hda: ATAPI 24X CD-ROM drive, 256kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbcore: registered new driver libusual usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: No PS/2 controller found. Probing ports directly. serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode ACPI wakeup devices: PCI0 ACPI: (supports S0 S4 S5) Freeing unused kernel memory: 244k freed Write protecting the kernel read-only data: 723k Fusion MPT base driver 3.03.09 Copyright (c) 1999-2005 LSI Logic Corporation SCSI subsystem initialized Fusion MPT SAS Host driver 3.03.09 ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 64 (level, low) -> IRQ 66 mptbase: Initiating ioc0 bringup ioc0: SAS1068: Capabilities={Initiator} scsi0 : ioc0: LSISAS1068, FwRev=00062800h, Ports=1, MaxQ=511, IRQ=66 Vendor: ATA Model: WDC WD1600JS-75N Rev: 2E04 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 312500000 512-byte hdwr sectors (160000 MB) sda: Write Protect is off sda: Mode Sense: 67 00 00 08 SCSI device sda: drive cache: write back SCSI device sda: 312500000 512-byte hdwr sectors (160000 MB) sda: Write Protect is off sda: Mode Sense: 67 00 00 08 SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sda4 sd 0:0:0:0: Attached scsi disk sda Vendor: ATA Model: WDC WD1600JS-75N Rev: 2E04 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdb: 312500000 512-byte hdwr sectors (160000 MB) sdb: Write Protect is off sdb: Mode Sense: 67 00 00 08 SCSI device sdb: drive cache: write back SCSI device sdb: 312500000 512-byte hdwr sectors (160000 MB) sdb: Write Protect is off sdb: Mode Sense: 67 00 00 08 SCSI device sdb: drive cache: write back sdb: sdb1 sd 0:1:1:0: Attached scsi disk sdb Vendor: ATA Model: WDC WD1600YS-18S Rev: 6C07 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdc: 312500000 512-byte hdwr sectors (160000 MB) sdc: Write Protect is off sdc: Mode Sense: 67 00 00 08 SCSI device sdc: drive cache: write back SCSI device sdc: 312500000 512-byte hdwr sectors (160000 MB) sdc: Write Protect is off sdc: Mode Sense: 67 00 00 08 SCSI device sdc: drive cache: write back sdc: sdc1 sd 0:2:2:0: Attached scsi disk sdc Vendor: ATA Model: WDC WD5002ABYS-1 Rev: 3B04 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdd: 976773168 512-byte hdwr sectors (500108 MB) sdd: Write Protect is off sdd: Mode Sense: 67 00 00 08 SCSI device sdd: drive cache: write back SCSI device sdd: 976773168 512-byte hdwr sectors (500108 MB) sdd: Write Protect is off sdd: Mode Sense: 67 00 00 08 SCSI device sdd: drive cache: write back sdd: sdd1 sd 0:3:3:0: Attached scsi disk sdd libata version 1.20 loaded. ata_piix 0000:00:1f.2: version 1.05 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 23 (level, low) -> IRQ 74 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0xCC98 ctl 0xCC92 bmdma 0xCC60 irq 74 ata2: SATA max UDMA/133 cmd 0xCC80 ctl 0xCC7A bmdma 0xCC68 irq 74 ata1: SATA port has no device. scsi1 : ata_piix ata2: SATA port has no device. scsi2 : ata_piix EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks audit(1361778055.056:2): selinux=0 auid=4294967295 hw_random hardware driver 1.0.0 loaded USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 82 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 82, io base 0x0000cce0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 20 (level, low) -> IRQ 90 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 90, io base 0x0000ccc0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:1:1:0: Attached scsi generic sg1 type 0 sd 0:2:2:0: Attached scsi generic sg2 type 0 sd 0:3:3:0: Attached scsi generic sg3 type 0 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 82 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 82, io base 0x0000cca0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 82 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 82, io mem 0xfc700400 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 6 ports detected usb 1-1: new full speed USB device using uhci_hcd and address 2 Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.4.40 (May 22, 2006) ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 16 (level, low) -> IRQ 169 eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B1) PCI-X 64-bit 133MHz found at mem f4000000, IRQ 169, node addr 00188b321042 ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 169 eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B1) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 169, node addr 00188b321040 usb 4-1: new high speed USB device using ehci_hcd and address 2 usb 4-1: configuration #1 chosen from 1 choice hub 4-1:1.0: USB hub found hub 4-1:1.0: 2 ports detected usb 4-5: new high speed USB device using ehci_hcd and address 3 usb 4-5: configuration #1 chosen from 1 choice hub 4-5:1.0: USB hub found hub 4-5:1.0: 4 ports detected usb 4-1.1: new full speed USB device using ehci_hcd and address 4 usb 4-1.1: configuration #1 chosen from 1 choice input: Dell DRAC5 as /class/input/input0 input: USB HID v1.10 Keyboard [Dell DRAC5] on usb-0000:00:1d.7-1.1 input: Dell DRAC5 as /class/input/input1 input: USB HID v1.10 Mouse [Dell DRAC5] on usb-0000:00:1d.7-1.1 usb 4-1.2: new high speed USB device using ehci_hcd and address 5 usb 4-1.2: configuration #1 chosen from 1 choice Initializing USB Mass Storage driver... scsi3 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 5 usb-storage: waiting for device to settle before scanning scsi4 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 5 usb-storage: waiting for device to settle before scanning usbcore: registered new driver usb-storage USB Mass Storage support registered. floppy0: no floppy controllers found lp: driver loaded but no devices found ACPI: Power Button (FF) [PWRF] ibm_acpi: ec object not found md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel(a)redhat.com EXT3 FS on sda1, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda4, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sdb1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sdc1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sdd1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Vendor: Dell Model: Virtual CDROM Rev: 123 Type: CD-ROM ANSI SCSI revision: 00 Vendor: Dell Model: Virtual Floppy Rev: 123 Type: Direct-Access ANSI SCSI revision: 00 3:0:0:0: Attached scsi generic sg4 type 5 usb-storage: device scan complete sd 4:0:0:0: Attached scsi removable disk sde sd 4:0:0:0: Attached scsi generic sg5 type 0 usb-storage: device scan complete sr0: scsi-1 drive sr 3:0:0:0: Attached scsi CD-ROM sr0 Adding 2048276k swap on /dev/sda2. Priority:-1 extents:1 across:2048276k Adding 2048276k swap on /dev/sda3. Priority:-2 extents:1 across:2048276k bnx2: eth0: using MSI bnx2: eth0 NIC Link is Up, 100 Mbps full duplex bnx2: eth1: using MSI bnx2: eth1 NIC Link is Up, 100 Mbps full duplex NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver eth1: no IPv6 routers present eth0: no IPv6 routers present Bluetooth: Core ver 2.8 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.7 Bluetooth: HIDP (Human Interface Emulation) ver 1.1 i2c /dev entries driver On Wed, Feb 27, 2013 at 4:44 PM, Gilboa Davara <gilboad(a)gmail.com&gt; wrote:

I had it only once and after few reboots it worked. But I need to sort this and I am sure its not because of old hardware support with fedora. Now issues is resolved and I just need to know why it caused that error once. What do you think? On Wed, Feb 27, 2013 at 4:57 PM, Gilboa Davara <gilboad(a)gmail.com&gt; wrote:

On 27 February 2013 12:38, Darin Vivekananad <darin(a)didforsale.com&gt; wrote: Considering this is the -devel list this shouldn't even really be here anyway - the users list would be more appropriate... As Gilboa already mentioned FC5 is well out of support in addition to this - there are no updates (security, bugfixes, etc for this) so CentOS5 would be far more appropriate from a software perspective and you really need to carry out some hardware tests such as memtest.

(Sorry for top posting - mobile) Looking at the screenshot you sent it looks like network device driver (bnx2) related crash. Given how old both hardware and software are, there is no way of knowing what was the root cause of this crash by looking at the screenshot. Start by running memtest - if it passes without fault and you continue to experience kernel crashes you should really replace Fedora with CentOS. - Gilboa Sent from my SGS2 On Feb 27, 2013 3:46 PM, "Darin Vivekananad" <darin(a)didforsale.com&gt; wrote: