Update on Fedora 7 release progress
by Jesse Keating
We're getting closer, ever so closer. Many of the hurdles have been cleared,
such as getting all packages signed (which is why rawhide is slow to show up,
lots of little churn), testing final code paths of compose tools, clearing a
name through legal, etc...
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=FC7Blocker is the blocker
bug. We're currently either fixing, or heavily scrutinizing and downgrading
what's left on this tracker. We're continuing to test various things from
our test matrix (which I need to update with my results):
http://fedoraproject.org/wiki/QA/7/FinalTreeTesting
Due to the logistics of moving things around for a release and press
announcements and all that, we have a firm go/nogo decision to make at 2pm
EDT tomorrow (Friday) for a release on the 31st. You'll probably see some
discussion on this list, some in #fedora-devel, and as the nature goes, some
discussion will happen over cube walls between various folks. We'll try to
be "public" about what's going on as best we can.
--
Jesse Keating
Release Engineer: Fedora
16 years, 11 months
rawhide report: 20070524 changes
by Build System
New package ants
Guide your ants safely home before they drop of the cliff
New package avr-gcc
Cross Compiling GNU GCC targeted at avr
New package rott
Rise of the Triad
New package vavoom
Enhanced Doom, Heretic, Hexen and Strife source port
Removed package gaim-galago
Updated Packages:
anaconda-11.2.0.64-1
--------------------
* Wed May 23 2007 Peter Jones <pjones(a)redhat.com> - 11.2.0.64-1
- Fix going back in network configuration (dcantrell, #239958)
- Fix handling of empty prefixes in CIDR setup (dcantrell)
- Fix filesystem detection on existing raid devices (#151653)
* Tue May 22 2007 Jeremy Katz <katzj(a)redhat.com> - 11.2.0.63-1
- Avoid a few potential tracebacks with partitioning (dcantrell)
- A few more network bringup fixes (dcantrell, #240804)
- More upgrade blacklisting
- Fix reinstall over existing RAID
* Mon May 21 2007 Jeremy Katz <katzj(a)redhat.com> - 11.2.0.62-1
- Switch to mdadm internally for raid handling instead of raidautorun
- Slight changes to early swap requirements (#232862)
- Fixes to help with DVD install + adding a network repo (#240804)
- Turn off betanag
emacs-22.0.990-2.fc7
--------------------
* Wed May 23 2007 Chip Coldwell <coldwell(a)redhat.com> - 22.0.990-2
- revert all spec file changes since 22.0.95-1 (Resolves: bz239745)
- new pretest tarball from FSF (Resolves: bz238234)
- restore php-mode (Resolves: bz235941)
* Mon May 21 2007 Chip Coldwell <coldwell(a)redhat.com> - 22.0.990-1
- new pretest tarball from FSF
- removed Ulrich Drepper's patch to prevent mmapped pages during dumping
removed BuildRequires: glibc >= 2.5.90-22
(bug traced to glibc Resolves: bz239344)
- fix alternatives removal scriptlet (Resolves: bz239745)
* Thu May 17 2007 Chip Coldwell <coldwell(a)redhat.com> - 22.0.99-4
- format of freed blocks changed between glibc 2.5.90-21 and 2.5.90-22
- BuildRequires: glibc >= 2.5.90-22 (Ulrich Drepper)
kdeadmin-7:3.5.6-5.fc7
----------------------
* Wed May 23 2007 Than Ngo <than(a)redhat.com> - 7:3.5.6-5.fc7
- fix bz#241049, kpackage does not run from the menu
kernel-2.6.21-1.3190.fc7
------------------------
* Tue May 22 2007 Kristian Høgsberg <krh(a)redhat.com>
- Add missing byteswap in fw-ohci (#238606).
poker-engine-1.0.25-1.fc7
-------------------------
* Wed May 23 2007 Christopher Stone <chris.stone(a)gmail.com> 1.0.25-1
- Upstream sync
poker-eval-134.0-1.fc7
----------------------
* Wed May 23 2007 Christopher Stone <chris.stone(a)gmail.com> 134.0-1
- Upstream sync
- Minor spec file cleanups
poker-network-1.0.37-1.fc7
--------------------------
* Wed May 23 2007 Christopher Stone <chris.stone(a)gmail.com> 1.0.37-1
- Upstream sync
- Remove no longer needed db patch
poker2d-1.0.37-2.fc7
--------------------
* Wed May 23 2007 Christopher Stone <chris.stone(a)gmail.com> 1.0.37-2
- Add patch to allow python25 builds
* Wed May 23 2007 Christopher Stone <chris.stone(a)gmail.com> 1.0.37-1
- Upstream sync
pungi-0.3.3-1.fc7
-----------------
* Wed May 23 2007 Jesse Keating <jkeating(a)redhat.coM> - 0.3.3-1
- Commit config files used for producing Fedora 7
- Default pungi.conf file to using Fedora 7 stuff
* Mon May 21 2007 Jesse Keating <jkeating(a)redhat.coM> - 0.3.2-1
- Don't quote ISO label, not running mkisofs in shell
- Apply sparc patches (spot)
- Fix cached downloads comparing correctly
- Shorten 'development' to 'devel' in default config, more space for mkisofs
- Handle config file missing better (jgranado)
pypoker-eval-134.0-1.fc7
------------------------
* Wed May 23 2007 Christopher Stone <chris.stone(a)gmail.com> 134.0-1
- Upstream sync
- Remove libtool archive instead of %excluding it
16 years, 11 months
Re: iwl3945 status in fedora7
by Steve Hill
Kevin Kofler writes:
>> hi,will we see iwl3945 in fedora7 by default.
>
> Fedora 7 is going to ship the new iwlwifi driver which supports the
> IPW3945abg chipset.
Rawhide appears to be shipping the iwl3945 driver at the moment (test 4
had iwlwifi). Whilest iwl3945 is very unstable when combined with
NetworkManager, it does at least work for me to some extent - I couldn't
get iwlwifi to work at all. I'm currently testing iwl3945 without
NetworkManager to see if that works around my stability problems (and I
note there are quite a few iwl3945 bugs in bugzilla).
Since iwlwifi seems to work better for some people and iwl3945 seems to
work better for others, and neither requires propriatory stuff in userland
anymore, is there any reason not to ship with both and let the user
choose the one which works for them?
(I'm using an iwl3945abg in an Acer TravelMate 6413).
--
- Steve
xmpp:steve@nexusuk.org sip:steve@nexusuk.org http://www.nexusuk.org/
Servatis a periculum, servatis a maleficum - Whisper, Evanescence
16 years, 11 months
ifcfg-* files vanishing
by Steve Hill
I'm not sure how to go about debugging this problem.
If I set up a /etc/sysconfig/network-scripts/ifcfg-wlan0 file for my
wireless network NIC and ifup wlan0 then everything works. If I reboot
and the wireless NIC is not present then during the boot process
something moves the ifcfg-wlan0 file to ifcfg-wlan0.bak. This is
obviously not great since then when the NIC becomes available again all
the config for it has vanished so I can't ifup it until I've put the
ifcfg-wlan0 file back.
However, I have absolutely no idea what might be removing the
configuration on boot. My only guess is that it might be Kudzu, but that
really is a bit of a blind guess.
--
- Steve
xmpp:steve@nexusuk.org sip:steve@nexusuk.org http://www.nexusuk.org/
Servatis a periculum, servatis a maleficum - Whisper, Evanescence
16 years, 11 months
Re: network profiles - do they work for you? they are broken for me!
by Valent Turkovic
Can you please look at my youtube video and then respond if I use
system-config-network how it is not supposed to be used or if
system-config-network is broken?
http://www.youtube.com/watch?v=Zoy9k5euZRQ
On 5/17/07, John DeDourek <dedourek(a)unb.ca> wrote:
> Valent Turkovic wrote:
> > Hi,
> > I tried using network profiles on my Fedora Core 6 and Fedora 7
> > systems and they don't work for me.
> >
> > Can you tell me if you use network profiles build into
> > system-config-network and system-control-network tools?
> >
> > When I use gui system-config-network to setup network profiles no
> > matter which one I choose and edit I end up with all the profiles with
> > the same settings!
> >
> > I can't setup two different profiles!
> >
> > Can you please explain how do you use network profiles via
> > system-config-network ?
> >
> > Thank you.
> >
> First, I am doing this from home, from memory, so I can't
> give you exact wordings of menu items, nor exact location
> of menus. But this general procedure works for FC5. I can't
> at the moment verify it for FC6 or FC7.
>
> I use the following procedure.
> --I leave the configuration of all the interfaces as installed
> --I leave the contents of the default profile as installed
>
> When I want a new profile, say for my home lan, using the
> GUI:
> -- Make a "copy" of the appropriate lan interface
> -- Edit the copy of the lan interface (leaving the original
> alone); I usually change the name of the interface from
> the "Copy of eth0" to something like "HomeLan"; I also edit
> whatever other features I want to select for the home LAN,
> e.g. static or dynamic IP, etc.
> -- Create a new profile, say HomeLan; it doesn't bother me
> to have a profile and interface named the same; however
> if you find that confusing, name the interface "HomeLanIface"
> and name the profile "HomeLanProfile"
> -- Make sure only the appropriate interface (e.g. HomeLan" is
> now checked from the profile (HomeLan)
> -- Save it; (I think File->Save
> You're done
>
> What is hapening behind the scenes:
>
> Each of those interfaces is a script file containing bash
> variable assignments. You need a separate file for the LAN
> interface for each profile, because they need to have different
> values assigned to the variables. When you say that all the
> profiles are the same, I am presuming that you are not making
> a separate copy of the interface for each profile. So of course,
> you are always essentially constantly changing the values in
> the one and only interface file. These files are kept somewhere
> like /etc/sysconfig/networking/devices/
>
> Each of the profiles is a directory, I think under
> /etc/sysconfig/networking/profiles/ In that directory is
> a symbolic link to each of the "device" files that is
> configured for that interface.
>
> When you switch profiles, the "device" files (which are
> named something like "ifcfg-HomeLanIface") for the old
> profile are deleted from /etc/sysconfig/network-scripts/ and
> the "device" files for the new profile are copied in.
> Actually, I think that's wrong; the scripts are probably not
> copied, but links are created. I seem to recall that they
> are hard links rather than symbolic links.
>
> BTW, if you use the commands /sbin/ifup and /sbin/ifdown rather
> than the GUI to bring the interfaces up and down, use the
> device name (interface name) that you created in the GUI,
> not the Linux interface name as you would use it in
> /sbin/ifconfig. That is, use
> /sbin/ifup HomeLanIface
> /sbin/ifdown HomeLanIface
>
> Hope this is useful to you.
>
> --
> fedora-list mailing list
> fedora-list(a)redhat.com
> To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
>
--
http://kernelreloaded.blog385.com/
linux, blog, anime, spirituality, windsurf, wireless
registered as user #367004 with the Linux Counter, http://counter.li.org.
ICQ: 2125241
Skype: valent.turkovic
16 years, 11 months
Boot Anaconda with Grub rpm package
by Sindre Pedersen Bjordal
I usually do upgrades via Anaconda by copying the vmlinuz and initrd.img
from the isolinux dir on the install media to my /boot and then adding
an entry to /etc/grub.conf to boot into Anaconda and do the Upgrade.
Today I decided that replacing this manual process by a rpm file
containing the files with the necessary scriplet shebang for the grub
stuff would be a better idea. Attached is my .spec so far.
This works for me, as in install/uninstall add/removes the grub entry
and the right files. Rebooting and selecting the "Install/Upgrade Fedora
6.93" entry in the grub boot menu actually boots Anaconda and asks for
the install method.
Some questions though:
Is this usable for anyone but me?
Can this be distributed in Fedora, can it be distributed by me? Am I
doing something wrong by repackaging the binary initrd.img and vmlinuz
files?
Multi-arch: My initial idea was to just create one tarball per arch and
have them in the spec as Source0, Source1 and so forth and use arch
macros in the spec to determine which tarball to use on which arch. Does
anyone have a better idea?
SRPM here:
http://folk.ntnu.no/sindrb/packages/fedora-bootanaconda-6.93-1.fc7.src.rpm (7.3 MB)
SPEC here: http://folk.ntnu.no/packages/fedora-bootanaconda.spec
(spec is also attached)
--
Sindre Pedersen Bjørdal <foolish(a)guezz.net>
- http://www.fedoraproject.org/wiki/SindrePedersenBjordal
16 years, 11 months
No add-on repos in kickstart file after install
by Joachim Frieben
I have successfully installed FC5/FC6 using FC6 and FC 6.91 rescue CDs [for later versions, DHCP is broken] via http mode. Adding update repos at install time allows [mostly] to install updated packages on the fly.
However, the kickstart file written out after install does not show any trace of this additional channel. Bug or feature?
--
Ist Ihr Browser Vista-kompatibel? Jetzt die neuesten
Browser-Versionen downloaden: http://www.gmx.net/de/go/browser
16 years, 11 months
ppc64 egrep weirdness
by Michael Schwendt
In a ppc64 build, which succeeds on ppc/i386/x86_64, I've run into a
situation where egrep fails
echo 'private1: PRIVATE: (libc.so.6:GLIBC_PRIVATE) __open_catalog' | egrep 'PRIVATE:.*libc.*(__open|__nanosleep)'
while the corresponding grep succeeds:
echo 'private1: PRIVATE: (libc.so.6:GLIBC_PRIVATE) __open_catalog' | grep 'PRIVATE:.*libc.*\(__open\|__nanosleep\)'
Does anyone have a theory why egrep fails only on ppc64 in this case?
16 years, 11 months
PowerTOP tool released; time to fix the wasted laptop power on fedora?
by Arjan van de Ven
Hi,
some of you already know that I've been working on getting Linux (and
Fedora) to be a lot better about power usage on laptops by avoiding
spurious wakeups and context switches and such (look at the "wakeup" bug
in fedora bugzilla ;).
As part of my job at Intel I've now released a user friendly tool that
allows everyone that uses it to see what the biggest problems on their
own laptop are... The results internally to Intel have been really good;
several people gained an hour of battery just by using the tool and
getting rid of (or fixing) 'broken' applications.
PowerTOP can be downloaded from http://www.linuxpowertop.org
for completeness I've attached the full announcement text I used in
other places below. I hope that enough people will use it and report /
fix issues in software so that the whole Linux experience on laptops
will be a lot better in a few months..
----------------------
What's eating the battery life of my laptop? Why isn't it many more
hours? Which software component causes the most power to be burned?
These are important questions without a good answer... until now.
The Linux 2.6.21 kernel introduces the so called tickless-idle
feature. This feature allows the processor to be really idle for long
periods of time, rather than having to wake up every millisecond for
the timer tick. Current processors save a lot of power if they are
idle for long periods, which translates into a longer battery life for
your laptop, or a lower energy bill for your datacenter. However, a
Linux system consists of more software than just the kernel, and there
are many tunables involved. It's not easy to see what is going on, and
as a result the behavior is sometimes far from optimal, and a lot of
power is wasted.
Intel is proud to announce the PowerTOP tool
(http://www.linuxpowertop.org), a program that collects the various
pieces of information from your system and presents an overview of how
well your laptop is doing in terms of power savings. In addition,
PowerTOP will provide an indication of which tunables and software
components are the biggest offenders in slurping up your battery time.
PowerTOP will update it's display frequently so that you can directly
see the impact of any changes you are making.
A typical Linux distribution has many components that wake the
processor up frequently for no good reason. In our testing with
PowerTOP, we have seen many cases where with some simple fixes, the
battery life of typical laptops was increased by one hour or more!
We are providing fixes for several of the issues we identified, and we
encourage the Linux community to help us in this quest to get the
maximum battery life out of your (hopefully Intel based) laptops. Try
the PowerTOP tool, join the mailing list or the IRC channel and
provide feedback, problem reports or fixes!
Website: http://www.linuxpowertop.org
IRC: irc.oftc.net #powertop channel
Mailing list: http://www.bughost.org/mailman/listinfo/power
--
if you want to mail me at work (you don't), use arjan (at) linux.intel.com
Test the interaction between Linux and your BIOS via http://www.linuxfirmwarekit.org
16 years, 11 months
Release i386 rawhide rebuild in mock status 2007-05-23
by Matt Domsch
Release Rawhide-in-Mock Build Results for i386 Wed May 23 01:25:04 CDT 2007
Full logs at http://linux.dell.com/files/fedora/FixBuildRequires/
Total packages: 4220
Number failed to build: 111
Number expected to fail due to ExclusiveArch or ExcludeArch: 10
Leaving: 101
(there may be some duplicates if rawhide has 2 versions of a package)
Of those expected to have worked...
Without a bug filed: 101
----------------------------------
QuantLib-0.3.14-2.fc7 (build/make) tcallawa(a)redhat.com
adaptx-0.9.13-4jpp.1.fc7 (build/make) pcheung(a)redhat.com
airsnort-0.2.7e-11.fc7 (build/make) andreas.bierfert(a)lowlatency.de
apel-10.6-9.fc6 (build/make) tagoh(a)redhat.com
athcool-0.3.11-5.fc6 (build/make) gajownik(a)gmail.com
autoconf-2.61-8.fc7 (build/make) karsten(a)redhat.com
bigloo-2.9a-3.fc7 (build/make) gemi(a)bluewin.ch
castor-0.9.5-1jpp.7 (build/make) pcheung(a)redhat.com
checkstyle-4.1-4jpp.1.fc7 (buildroot) nsantos(a)redhat.com
cryptix-3.2.0-9jpp.1 (build/make) mwringe(a)redhat.com
cryptix-asn1-20011119-7jpp.2 (build/make) vivekl(a)redhat.com
csmash-0.6.6-14.fc7 (build/make) matthias(a)rpmforge.net
ddskk-12.2.0-11.fc7 (build/make) petersen(a)redhat.com
desktop-file-utils-0.12-4.fc7 (build/make) rstrode(a)redhat.com
dump-0.4b41-5.fc7 (build/make) atkac(a)redhat.com
em8300-kmod-0.16.2-0.2.6.20_1.3104.fc7.1.rc2 (buildroot) ville.skytta(a)iki.fi
emacs-auctex-11.84-2.fc7 (build/make) jonathan.underwood(a)gmail.com
emacs-common-muse-3.02.93-5.fc7 (build/make) jonathan.underwood(a)gmail.com
emacs-nxml-mode-0.20041004-5.fc7 (build/make) twaugh(a)redhat.com
emacs-vm-7.19.devo282-11.fc7 (build/make) jonathan.underwood(a)gmail.com
emacspeak-25-3.fc7 (build/make) petersen(a)redhat.com
erlang-R11B-2.4.fc7 (build/make) gemi(a)bluewin.ch
flim-1.14.8-2.fc6 (build/make) petersen(a)redhat.com
ftnchek-3.3.1-5.fc6 (build/make) orion(a)cora.nwra.com
gaim-galago-0.5.1-1.fc6 (build/make) bdpepple(a)ameritech.net
gcdmaster-1.2.2-1.fc6 (buildroot) denis(a)poolshark.org
gift-0.11.8.1-6.fc7 (build/make) rdieter(a)math.unl.edu
gnome-python2-desktop-2.18.0-1.fc7 (build/make) mbarnes(a)redhat.com
gnome-sharp-2.16.0-1.fc6 (build/make) alexl@redhat.com,lxtnow(a)gmail.com
gnotime-2.2.2-7.fc6 (build/make) toshio(a)tiki-lounge.com
gnu-smalltalk-2.3.3-5.fc7 (build/make) Jochen@herr-schmitt.de,lxtnow(a)gmail.com
gnuplot-4.0.0-18.fc7 (build/make) varekova(a)redhat.com
grub-0.97-13 (build/make) pjones(a)redhat.com
gstm-1.2-6.fc7 (build/make) splinux(a)fedoraproject.org
gtk-sharp-1.0.10-12.fc7 (build/make) paul(a)all-the-johnsons.co.uk
gtypist-2.7-4.fc6 (build/make) zing(a)fastmail.fm
gwget-0.98.2-1.fc7 (build/make) fedora(a)christoph-wickert.de
heartbeat-2.0.8-1.fc7 (build/make) kevin(a)tummy.com
heliodor-0.2.0-1.fc7 (build/make) jwilson@redhat.com,matthias(a)rpmforge.net
jakarta-commons-el-1.0-7jpp.1.fc7 (build/make) fnasser(a)redhat.com
jgroups-2.2.9.2-3jpp.2 (build/make) vivekl(a)redhat.com
jogl-1.0.0-5.7.beta5.fc6 (build/make) green(a)redhat.com
junit-3.8.2-3jpp.1.fc7 (build/make) dbhole(a)redhat.com
k3d-0.6.5.0-1.fc7 (build/make) denis(a)poolshark.org
kawa-1.9.0-2.fc7 (build/make) green(a)redhat.com
kdesdk-3.5.6-1.fc7 (build/make) than@redhat.com,rdieter(a)math.unl.edu
kdnssd-avahi-0.1.3-0.1.20060713svn.fc6 (build/make) mbacovsk(a)redhat.com
kita-0.177.3-10.fc7.1 (buildroot) mtasaka(a)ioa.s.u-tokyo.ac.jp
kyum-0.7.5-4.fc6 (build/make) Jochen(a)herr-schmitt.de
ldapjdk-4.17-1jpp.7 (build/make) vivekl(a)redhat.com
libgssapi-0.10-3.fc7 (build/make) steved(a)redhat.com
libipoddevice-0.5.3-1.fc7 (build/make) caillon(a)redhat.com
libpaper-1.1.20-5.fc6 (build/make) tcallawa(a)redhat.com
linux-atm-2.5.0-1.20050118cvs (build/make) dwmw2(a)redhat.com
mew-5.2-3.fc7 (build/make) tagoh(a)redhat.com
mikmod-3.2.2-2.fc7 (build/make) jnovy(a)redhat.com
monotone-0.35-3.fc7 (build/make) roland(a)redhat.com
msv-1.2-0.1.20050722.3jpp.1.fc7 (build/make) mwringe(a)redhat.com
mysqlclient10-3.23.58-9.2.1 (build/make) tgl(a)redhat.com
mysqlclient14-4.1.14-4.2.1 (build/make) tgl(a)redhat.com
nant-0.85-12.fc7 (build/make) paul(a)all-the-johnsons.co.uk
ncview-1.92e-10.fc7 (build/make) ed(a)eh3.com
netcdf-3.6.2-1.fc7 (build/make) ed(a)eh3.com
nfs-utils-lib-1.0.8-8.fc7 (build/make) steved(a)redhat.com
ocaml-3.09.3-1.fc7 (build/make) gemi(a)bluewin.ch
openhpi-2.8.1-1.fc7 (build/make) pknirsch(a)redhat.com
orpie-1.4.3-5.fc6 (build/make) lists(a)forevermore.net
perl-Test-WWW-Mechanize-1.12-1.fc6 (build/make) jpo(a)di.uminho.pt
php-extras-5.2.1-1.fc7 (buildroot) dmitry(a)butskoy.name
postgresql-jdbc-8.2.504-1jpp.fc7 (build/make) tgl(a)redhat.com
ppc64-utils-0.11-4.fc7 (buildroot) pnasrat(a)redhat.com
prelink-0.3.10-1 (build/make) jakub(a)redhat.com
psgml-1.2.5-6.fc7 (build/make) atkac(a)redhat.com
purple-galago-0.5.1-3.fc7 (buildroot) bdpepple@ameritech.net,stu@nosnilmot.com,wtogami(a)redhat.com
qa-assistant-0.4.90.5-2.fc6 (build/make) toshio(a)tiki-lounge.com
rhm-0.1-3.fc7 (build/make) aconway@redhat.com,nsantos(a)redhat.com
ruby-1.8.6-2.fc7 (build/make) tagoh(a)redhat.com
sblim-cmpi-base-1.5.4-7.fc7 (build/make) hamzy(a)us.ibm.com
scribes-0.3.2.5-1.fc7 (buildroot) peter(a)thecodergeek.com
scrip-1.4-6.fc6 (build/make) ed(a)eh3.com
setools-3.1-4.fc7 (build/make) dwalsh(a)redhat.com
snort-2.6.1.3-1.fc7 (build/make) dennis(a)ausil.us
struts-1.2.9-4jpp.6 (build/make) dbhole(a)redhat.com
synce-software-manager-0.9.0-7.fc6 (build/make) andreas.bierfert(a)lowlatency.de
synce-trayicon-0.9.0-8.fc6 (build/make) andreas.bierfert(a)lowlatency.de
sysprof-kmod-1.0.8-1.2.6.21_1.3116.fc7 (buildroot) giallu(a)gmail.com
tetex-3.0-39.fc7 (build/make) jnovy(a)redhat.com
ucblogo-5.5-9.fc7 (build/make) gemi(a)bluewin.ch
velocity-1.4-6jpp.1 (build/make) vivekl(a)redhat.com
vigra-1.5.0-2.fc7 (buildroot) bruno(a)postle.net
w3m-el-1.4.4-6.fc7 (build/make) tagoh(a)redhat.com
xferstats-2.16-14.1 (build/make) than(a)redhat.com
xml-commons-resolver-1.1-1jpp.12 (build/make) fnasser(a)redhat.com
xorg-x11-drv-calcomp-1.1.0-2.fc7 (build/make) krh(a)redhat.com
xorg-x11-drv-citron-2.2.0-2.fc7 (build/make) krh(a)redhat.com
xorg-x11-drv-dmc-1.1.0-3.fc7 (build/make) krh(a)redhat.com
xorg-x11-drv-dynapro-1.1.0-3.fc7 (build/make) krh(a)redhat.com
xorg-x11-drv-evdev-1.1.2-3.fc7 (build/make) krh(a)redhat.com
xorg-x11-drv-microtouch-1.1.0-2.fc7 (build/make) krh(a)redhat.com
xorg-x11-drv-penmount-1.1.0-3.fc7 (build/make) krh(a)redhat.com
xsupplicant-1.2.8-1.fc7.1 (build/make) tcallawa(a)redhat.com
With bugs filed: 0
----------------------------------
--
Matt Domsch
Software Architect
Dell Linux Solutions linux.dell.com & www.dell.com/linux
Linux on Dell mailing lists @ http://lists.us.dell.com
16 years, 11 months
