Hi all,
I would like to introduce myself to the group. I have recently
received an IGEPv2 board [1], which is based on the Beagle Board, but
with wifi, bluetooth, ethernet, and more RAM. I'm still at the "wow,
it's tiny and it runs Linux" stage. I should get a bit more time over
the next month and Christmas to play around properly with it.
I'm new to embedded development, but neither new to Linux nor ARM
(writing my first ARM assembly some 15 years ago). However, for the
past 6 years I've not even built a Linux kernel, preferring to use the
default kernel in Fedora for simplicity :)
Firstly, a thank you to those involved in Fedora ARM for getting it to
this stage. If I get the time, I'd really like to contribute some
(probably small) effort to help get Fedora ARM working well on the
IGEPv2 and Beagle Board. As I progress, I'd like to know what I can
do to help.
In the meantime, I have some questions. Apologies in advance if these
seem simple.
1) There are various different kernels from different sources. I'm
used to there being a small set of "right" kernels (that is, Fedora's
idea of "right") for x86. I fully appreciate that different ARM-based
boards are quite different in capabilities (like different instruction
set variants).
a) Is there likely to be some standardised vanilla Fedora ARM kernel
source? (Or is that simply the source RPM available for Fedora?)
Then patches /could/ be offered for the more common systems (e.g.
Beagle Board & clones, SheevaPlug).
b) Would it then make sense to offer these as pre-built RPMs for common systems?
c) Is there any guidance on which version is good to use as a base?
I've seen quite different kernel versions being used (from 2.6.27 to
2.6.31).
2) I understand a little bit about the different calling conventions,
FP differences (e.g. soft FPU versus VFP), and instruction set
differences (v5 versus v7).
a) Can the kernel can be safely built with a different instruction set
targeted? (I know there are different optimisation options passed to
GCC. Apologies if this seems a bit newbie-ish.)
b) For FP-heavy programs (e.g. ogg encoding), is it possible to build
the packages with VFP/NEON but still get them to work in a soft FPU
system? I'd imagine any call to an external library would have to
somehow be defined to use a different calling standard.
3) There seem to be some missing dependencies in the packages in the
current Fedora ARM repository. For example, emacs is requiring
libotf, which doesn't seem to be there in the repository. And
likewise with the xorg-x11-font* packages needing ttmkdir. I'm
confused as to how the RPM could have been successfully built without
it. What am I missing?
4) I see there has been some discussion over unaligned data access.
(Oh, I remember that from the ARM2 days.) It seems as if the
Cortex-A8 cores allow unaligned data access when set up to do so [2].
Does this, in any way, help with the compatibility of packages
targetting Cortex-A8?
5) I've managed to get various source packages missing from the Fedora
ARM repositories to compile successfully (natively). I guess there is
a reason why there are not in the repos right now -- is that reason
down to time and priorities, or is there some blocking bugs with many
of these packages?
I look forward to being able to contribute something back into Fedora!
Kind regards,
Matthew
[1] http://www.igep-platform.com/index.php?option=com_content&view=article&id=4…
[2] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0344j/Beihgi…
Hi all,
I've generated Fedora 20 images for Allwinner A{10,20,...} devices using
Hans' scripts. It's basically a stock Xfce image with sunxi u-boot and
sunxi-3.4 linux kernel. Available here: [1], please read the README [2]
file for installation instructions. I've only tested on an A10 based
Cubieboard so far and I would be thankful for any feedback; reports
about other boards that should be supported in particular.
[1] http://fedorapeople.org/~lkundrak/a10-images/
[2] http://fedorapeople.org/~lkundrak/a10-images/README
♥,
Lubo
Hi All,
I'm very happy to announce the third release (r3) of my Fedora 19 ARM
remix images for Allwinner A10, A10s, A13 and A20 based devices. This
release is based on the official Fedora 19 Final for ARM images,
with u-boot and kernel(s) from the linux-sunxi project:
http://linux-sunxi.org/
New this release:
1) Fix the bad brown paper bag bug in r2 which caused it to not boot
on sun4i (A10) and sun5i (A13/A10s) devices
2) Support for the cubietruck (except for the wifi module)
3) Support for the Megafeis A08 and Mini-X with A10s
You can download it here:
http://people.fedoraproject.org/~jwrdegoede/a10-images/Fedora-19-a10-armhfp…
sha1sum: a57e5897e0c6047dbb473c438016d6364fd0709f
It is important to read the README, the image standard comes without
u-boot pre-loaded since u-boot is board specific. The image includes
a user-friendly simple script to install the right u-boot for
your board, but if you simply xzcat the image to an sdcard, and then
boot your device with the sdcard, things will *not* work.
See the README for a list of currently supported boards.
Known Issues:
-Many boards don't have an rtc (A10 and A20 have a builtin one),
or at least no battery backup for it, resulting in the date
+ time being wrong.
-If the date is of by more then a couple of months, "yum update"
won't work because certificate validation fails for the https
connection yum tries to make. So if yum fails to get its repodata
first check (and fix) your date
-The regular (host not otg) usb-port on A10s based boards can be a
bit quirky. It is best to plug in a hub even when using only one
device, otherwise the device may not be recognized. If this happens,
after adding a hub, often a power-cycle is needed too.
-The wifi chip on the Auxtek-T004 hdmi-stick and on the cubietruck are
unsupported atm
Enjoy,
Hans
And to make sure everyone reads the README, let me print it here
in full:
Fedora 19 ARM for Allwinner A10, A10s, A13 and A20 devices README
-----------------------------------------------------------------
Quickstart guide
----------------
1) Insert an sdcard, note any data on the card will be destroyed!
2) Make sure the card is not mounted, run "mount" and if the card shows
up in the output umount its partitions
3) Write the img file to the card, ie as root do:
xzcat Fedora-19-a10-armhfp-r2.img.xz > /dev/mmcblk0
sync
4) The card is not yet ready for use! Since the A10 u-boot is board
specific, the image comes without any uboot install, follow the next
steps to install the right u-boot for your board
5) Remove the card, and re-insert it. The uboot partition should get
automatically mounted, if not mount it manually,
6) As root (or through sudo) run: <uboot-part-mount>/select-board.sh, ie:
sudo /run/media/hans/uboot/select-board.sh
If you've dialog installed the select-board.sh script will prompt for
your board. If you don't have dialog installed, it will print the list
of supported boards. Lookup your board and re-run the script with the
shortname for your board as argument, ie:
sudo sh /run/media/hans/uboot/select-board.sh mk802
7) umount the uboot and rootfs partitions, ie:
umount /run/media/hans/uboot
umount /run/media/hans/rootfs
8) Your sdcard is now ready for use
9) *Before* powering up your A10 device connect it to an hdmi or dvi monitor
10) When first booting from the sdcard inserted Fedora will automatically
reboot once, this is part of the process to resize the root partition to
fill the entire sdcard and is normal behavior.
11) After the automatic reboot Fedora will start with the initial-setup wizard:
11a) Configure networking, note:
* If you've an A10 board with wired ethernet and you want to use dhcp
you don't need to do anything.
* If you've an A20 board, your ethernet may have a random mac-address,
so if you want to configure a static ip-address and want it to stick
across reboots, go to the ethernet-tab, select the mac-address field
and delete its contents, so that the static ip address you're
configuring does not get tied to the random mac-address.
11b) Setup the time zone
11c) Set a root password
11d) Create a user
12) Log in as the just created user
13) Enjoy Fedora on your A10 device
Supported Devices:
------------------
Fedora 19 ARM for Allwinner A10 has been tested with the following devices:
* A10s-OLinuXino-MICRO (Olimex)
* A13-OLinuXino (Olimex)
* A13-OLinuXino-MICRO (Olimex)
* A20-OLinuXino-MICRO (Olimex)
* Auxtek T003 hdmi tv stick
* Auxtek T004 hdmi tv stick
* BA10 TV Box
* Cubieboard development board 1024 MB RAM
* Cubieboard2 (A20) development board
* Cubietruck development board
* Gooseberry development board
* Mele A1000G/A2000G 1024 MB RAM
* Mini-X 1024 MB RAM
* mk802 (with female mini hdmi) 512 MB RAM
* mk802 with A10s (s with a circle around it on the barcode label)
* mk802ii (with male normal hdmi) 1024 MB RAM
* r7 hdmi tv stick
* UHost U1A hdmi tv stick
* Wobo i5 TV Box
Fedora 19 ARM should also work on the following devices:
* A10 tablet sold under various names (whitelabel)
* A13 tablet sold under various names (whitelabel)
* Coby MID7042 tablet
* Coby MID8042 tablet
* Coby MID9742 tablet
* Cubieboard development board 512 MB RAM
* DNS AirTab M82 tablet
* EOMA68 A10 CPU card
* H6 netbook
* Hackberry development board
* Hyundai a7hd tablet
* iNet-97F Rev.2 (and clones) tablet
* Marsboard A10
* Megafeis A08
* Mele A1000/A2000 512 MB RAM
* Mele A3700
* Mini-X 512 MB RAM
* Mini-X with A10s soc
* mk802 (with female mini hdmi) 1024 MB RAM
* pcDuino development board
* Point of View ProTab 2 IPS 9" tablet
* Point of View ProTab 2 IPS tablet with 3g
* Sanei N90
* XZPAD700 7" tablet
Configuring the display output
------------------------------
Multiple video outputs at the same time are not supported. By default
hdmi output with EDID is used for all devices, except for tablets/netbooks
where the default output is the lcd.
The default hdmi output with EDID will get the native resolution of your
TV / monitor and use that. Note that in order for this to work your TV /
monitor must be connected *and turned on*, before booting your device.
The output resolution can be configured with the disp.screen0_output_mode
kernel cmdline value, which can be found in the extrargs part of uEnv.txt in
the uboot partition. The default uEnv.txt contains the following value:
disp.screen0_output_mode=EDID:1280x720p60
This means try to use EDID and if no valid EDID info is found fallback to
1280x720p60.
The used output can be changed by adding disp.screen0_output_type=X to the
extraargs in uEnv.txt. With X being one of: 0:none; 1:lcd; 2:tv; 3:hdmi; 4:vga
Some per display type notes:
-lcd outputs: Hardcoded to the native mode, disp.screen0_output_mode is ignored
-tv: For the cvbs output disp.screen0_output_mode must be set to one of the
following: pal, pal-svideo, ntsc, ntsc-svideo, pal-m, pal-m-svideo, pal-nc,
pal-nc-svideo. Note the -svideo variants should only be used on boards with
an svideo connector, for composite out use the regular variants, ie:
disp.screen0_output_type=2 disp.screen0_output_mode=pal
-hdmi: To override the EDID detected mode, drop the "EDID:" from the
disp.screen0_output_mode value and set it to the desired mode, ie:
disp.screen0_output_type=3 disp.screen0_output_mode=1360x768p60
-vga: Does not support EDID, "EDID:" must be removed from the
disp.screen0_output_mode value otherwise it will be ignored. interlaced
progressive and refreshrate settings specified are ignored, each resolution
has hardcoded values for these. Example usage:
disp.screen0_output_type=4 disp.screen0_output_mode=1024x768
How to power your allwinner device
----------------------------------
For reliable operation it is important that your allwinner device is properly
powered. Some users try to power their allwinner development boards through
the power pin on the serial port / uart connector. This is a very bad idea!
and will almost always result in unreliable operation. Instaed always power
your allwinner device over the barrel connector intended for that using,
using a quality, reliable power supply.
USB controller caveats
----------------------
The OTG USB controller in host mode only supports a limited number of
devices, plugging in a hub + mouse + keyboard typically will make either
the mouse or keyboard not work. This is a hardware limitation which we
will likely not be able to work around.
On tv-sticks and top-set boxes, simply avoid the otg connector, instead
use a hub in a regular host usb connector. Note on the mini-x the otg / host
marking is not always correct. If things don't work try using the OTG
connector instead!
On tablets and the gooseberry unfortunately only the otg connector is
available. One solution there is using a single usb-device which is
both a keyboard and a mouse at the same time. IE the receiver for logitech
wireless desktop sets.
Known Issues
------------
* The broadcom sdio wifi found in the Auxtek T004 hdmi-stick and on the
Cubietruck is not supported
Supported hardware components / features:
-----------------------------------------
Fedora 19 ARM for Allwinner A10 supports the following components:
* CPU + PMU + RAM
* Serial ports
* MMC cards
* Internal NAND storage
* Framebuffer on lcd / vga / hdmi / composite video
* Sound both analog out and over hdmi
* OTG USB controller
* Both standard USB host controllers
* Wifi
* Wired Ethernet
* SATA
* IR (untested at this time)
* SPI (as module, not supported on A20)
* "tablet" keys on olinuxino boards
* 7 and 10 inch lcd displays on olinuxino boards (requires selecting the
right config in select-board.sh
Unsupported hardware components:
--------------------------------
The following components require various proprietary blobs to be used, and
as such are not supported in the Fedora images. The kernel drivers for them
are present (usually as modules), so if you add the necessary blobs you might
get these to work:
* Mali 400 GPU
* Cedar hardware video & audio decoding and encoding engine
* G2D 2d engine
Note that the drivers for these need some memory to be reserved at boot, and
since they are not supported by default in the Fedora images, this memory
reservation has been disabled. To reserve the memory edit /boot/uEnv.txt and
remove the kernel cmdline options which disable the memory reservation.
Differences from stock Fedora
-----------------------------
* Since the A10 is not a very powerful soc some services which are enabled by
default on Fedora are disabled in the image, see build-image.sh for a list.
* No plymouth: we log to a serial console for debugging so no pretty splash.
Also we don't use an initrd, so removing the console=ttyS0,115200 from
the extraargs in uEnv.txt will give plymouth, but so late it hardly matters.
Rebuilding the Fedora 19 ARM for Allwinner A10 disk image
---------------------------------------------------------
Building the Fedora 19 ARM for Allwinner A10 disk image consists of 2 steps
1) Building a uboot.tar.gz and rootfs.tar.gz "overlays", this is done
bu the build-boot-root-sh script
2) Combining uboot.tar.gz and rootfs.tar.gz with an official Fedora 19 arm img,
this combining is done by the build-image.sh script
The a10 image you downloaded is based on Fedora-XFCE-armhfp-19-1-sda.raw
These scripts are hosted here:
https://github.com/jwrdegoede/sunxi-fedora-scripts.git
A copy of the exact versions of these scripts used to build this Fedora A10
image can be found in the scripts directory of the uboot partition, the
kernel config used during the build can be found here too.
If you want to exactly reproduce this image it is important to use the
scripts from the scripts dir of the uboot partition, as the scripts contain
GIT tags used during the build to checkout the exact versions to build.
The pre-conditions these scripts expect to be met, and the exact usage of
them is documented in comments in the top of each script.
> On Sat, June 28, 2014 4:28 pm, Peter Robinson wrote:
>>> So I just started to play with Fedora on my Wandboard. I connected via
>>> serial cable and booted it up for the first time. It booted nicely
>>> immediately and asked me to assign timezone and root password, which I
>>> did. I didn't create a user; I figure I can do that later. So far so
>>> good.
>>>
>>> However, I quickly noticed two things:
>>>
>>> 1) It did not resize the root filesystem. I thought it was supposed to
>>> do that automatically? Did something not run correctly the first
>>> time or is this a bug in F20?
>>
>> I'm not sure but I've got a feeling it might have resized the
>> partition but not the filesystem. The former has to be done before
>> anything is mounted where the later can be done online with resize2fs.
>> What does "fdisk -l /dev/STORAGE-DEV report? If it's a using all the
>> disk you can just use resize2fs to fix the issue.
>
> No, according to fdisk it is not using the whole disk.
> If it was I know that I could just use resize2fs.
> It's that the partition did not get resized.
>
>>> 2) Networking doesn't work. I plug it into a network cable and it tries
>>> to run DHCP but my DHCP server doesn't see any packets and the
>>> wandboard doesn't come up. I tried to configure it manually and it
>>> doesn't work. I've tried with multiple cables and it doesn't seem to
>>> help. I even pulled the cable out of a working machine, plugged it
>>> into the wandboard, and still nothing (it worked fine again when I
>>> plugged it back into the original machine).
>>>
>>> The wandboard seems to notice that there is link, but it cannot
>>> properly transmit anything.
>>
>> Which kernel? I seem to remember there might have been issues with the
>> kernel shipped as GA for the wandboard in some cases with network but
>> TBH it was a long time ago, I would suggest possibly getting the
>> latest kernel [1] putting it on a usb stick and updating it and see if
>> that helps.
>
> Whatever kernel was distributed with the F20 images.
>
> Do I just need to install the new kernel and symlink the dtb? Or is there
> more than just the kernel package I need to install?
If you upgrade to the latest arm-boot-config first before the kernel
you might not need to do that (I don't remember TBH) but if it's just
the NIC problems your having that should be enough to get the NIC
working. You might also want to look at rawhide nightly images as
they're pretty stable too.
Peter
[1] http://koji.fedoraproject.org/koji/buildinfo?buildID=508761
Hi,
So I just started to play with Fedora on my Wandboard. I connected via
serial cable and booted it up for the first time. It booted nicely
immediately and asked me to assign timezone and root password, which I
did. I didn't create a user; I figure I can do that later. So far so good.
However, I quickly noticed two things:
1) It did not resize the root filesystem. I thought it was supposed to
do that automatically? Did something not run correctly the first
time or is this a bug in F20?
2) Networking doesn't work. I plug it into a network cable and it tries
to run DHCP but my DHCP server doesn't see any packets and the
wandboard doesn't come up. I tried to configure it manually and it
doesn't work. I've tried with multiple cables and it doesn't seem to
help. I even pulled the cable out of a working machine, plugged it
into the wandboard, and still nothing (it worked fine again when I
plugged it back into the original machine).
The wandboard seems to notice that there is link, but it cannot
properly transmit anything.
In support of #2, running tcpdump -i eth0 on the wandboard I don't see
very much (I know I have much more broadcast traffic on my network):
16:15:16.924043 IP6 localhost > ff02::2: ICMP6, router solicitation, length 8
16:15:24.092095 IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request0
16:15:26.924618 IP6 localhost > ff02::2: ICMP6, router solicitation, length 8
16:15:36.924020 IP6 localhost > ff02::2: ICMP6, router solicitation, length 8
16:15:37.821455 IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request0
Could I have a bad board? :( Or could this still be a software issue?
Thanks,
-derek
--
Derek Atkins, SB '93 MIT EE, SM '95 MIT Media Laboratory
Member, MIT Student Information Processing Board (SIPB)
URL: http://web.mit.edu/warlord/ PP-ASEL-IA N1NWH
warlord(a)MIT.EDU PGP key available