In a brief first test of
Fedora-SoaS-armhfp-rawhide-20150203-sda.raw.xz
the image ran first time to HDMI, no serial cable used.
On Cubieboard, Sugar is noticeably a little less fluid than on a PC, but
is useable.
Many thanks
Iain
On Tue, 2015-02-03 at 15:52 -0500, Paul Whalen wrote:
----- Original Message -----
> Hi,
>
> On 02/03/2015 07:47 PM, Frans Meulenbroeks wrote:
> > For banana pi and mele A1000 this also did not work for me. Hans told me
> > last saturday that there is an issue in the device tree. He fixed this (at
> > least for the above devices) and gave me new dtb files. For Mele I already
> > tried it and the mouse/kbd works since.
> > Guess you have the same issue?
>
> Right, this is fixed in kernel 3.19-rc7 and should be fixed in the rawhide
> images
> as soon as they get 3.19-rc7,
Working on today's rawhide Xfce image[1], tested on the Banana Pi. Rawhide
images now include 3.19.0-0.rc7.git0.1.fc22.armv7hl.
Many thanks Hans and everyone for testing.
Paul
[1] -
https://kojipkgs.fedoraproject.org//work/tasks/5961/8805961/Fedora-Xfce-a...
>
> Regards,
>
> Hans
>
>
> >
> > Frans
> >
> > 2015-02-03 17:10 GMT+01:00 Iain Brown Douglas <iain(a)browndouglas.plus.com
> > <mailto:iain@browndouglas.plus.com>>:
> >
> > Following,
> >
http://fedoraproject.org/wiki/Architectures/ARM/F21/Installation
> >
> > I tested
> >
> > Fedora-SoaS-armhfp-rawhide-20150129-sda.raw.xz
> >
> > Booting with display direct to HDMI proceeds ok, except I notice that
> > the connected optical mouse does not illuminate.
> >
> > If it is first boot, an initial setup screen appears, (which displays
> > fine, 4:3) neither keyboard or mouse will produce a reaction. (This is
> > a
> > standard wired keyboard and optical mouse occupying the 2xUSB ports.)
> >
> > If it is a boot subsequent to running first boot over serial cable,
> > login screen displays fine 4:3, but cannot login, due to no keyboard or
> > mouse working.
> >
> > Another USB device with a LED indicates that the USB ports seem to be
> > unpowered, except for a short pulse at about the point where the boot
> > trace gives way to a black screen, say 5 seconds from power on.
> >
> > By comparison, by the same LED test, Fedora20 Remix powers the USB
> > ports
> > at about 3 seconds from power on, and same keyboard and mouse work
> > fine.
> >
> > Booting with serial cable is successful to login and performing simple
> > commands.
> >
> > Tested Fedora-Xfce-armhfp-rawhide-20150129-sda.raw.xz and got basically
> > same results.
> >
> > _______________________________________________
> > arm mailing list
> > arm(a)lists.fedoraproject.org <mailto:arm@lists.fedoraproject.org>
> >
https://admin.fedoraproject.org/mailman/listinfo/arm
> >
> >
> >
> >
> > _______________________________________________
> > arm mailing list
> > arm(a)lists.fedoraproject.org
> >
https://admin.fedoraproject.org/mailman/listinfo/arm
> >
> _______________________________________________
> arm mailing list
> arm(a)lists.fedoraproject.org
>
https://admin.fedoraproject.org/mailman/listinfo/arm