It took me a bit to work out issues with the serial console to get back into testing. Those issues are for a separate list...
I can get Minimal to go through the install process and set timezone, root password, and userid. When I go to log in I get:
Fedora release 21 (Twenty One) Kernel 3.16.0-0.rc7.git1.1.fc21.armv7hl on an armv7l (ttyS0)
localhost login: root Password: [ 64.141895] cfg80211: Calling CRDA to update world regulatory domain [ 66.257749] eth0: device MAC address c2:f5:e1:51:08:dd [ 66.450111] No MAC Management Counters available [ 66.712730] No MAC Management Counters available [ 66.718353] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 68.632241] stmmaceth 1c50000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 68.649252] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Last login: Wed Dec 31 19:04:26 on ttyS0 [root@localhost ~]# ifconfig -bash: ifconfig: command not found [root@localhost ~]# echo $PATH /usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin [root@localhost ~]#
No commands work. I know the IP address this device gets assigned so I tried pinging and ssh:
]# ping 208.87.63.186 PING 208.87.63.186 (208.87.63.186) 56(84) bytes of data. 64 bytes from 208.87.63.186: icmp_seq=1 ttl=47 time=78.8 ms 64 bytes from 208.87.63.186: icmp_seq=2 ttl=47 time=77.1 ms ^C --- 208.87.63.186 ping statistics --- 2 packets transmitted, 2 received, 0% packet loss, time 1001ms rtt min/avg/max/mdev = 77.167/78.009/78.852/0.887 ms # ssh 208.87.63.186 -l root ssh: connect to host 208.87.63.186 port 22: Connection refused
You can probably ping it yourself, but port 22 is blocked at the firewall router.
I powered off and rebooted, and still the same behaviour. I did a screen capture of the install, so can provide that if it would help (54K). Note I have had this problem since I started on Minimal with the 20140724 build, but have not been able to stablily test it. I believe my setup now provides a reliable test of the build on a Cubieboard 2.
Further note that I have a F19 and F20 remix working on this system on other SD cards. I can boot any of the versions just by switching which card is in it.
Thank you and I await advise on what to provide next (or a build that works for me).