----- Original Message -----
>
> On 12/5/18 11:25 AM, Robert Moskowitz wrote:
>>
>> On 12/5/18 10:43 AM, Paul Whalen wrote:
>>> There is still an issue in rawhide with the minimal image, I need to
>>> look
>>> at further. The server image[1] looks ok- both kernel and initrd are
>>> there
>>> anyways, there may be other problems. Or you could try one of the
>>> desktops.
>>>
>>> Paul
>>>
>>>
>>> [1] -
>>>
https://kojipkgs.fedoraproject.org/compose//rawhide/Fedora-Rawhide-201812...
>> Followed all the steps with using only uSD and booted up. Went
>> through the setup, and noticed it was not getting a network connection
>> reported in the setup, perhaps I should have gone into that option...
>>
>> Anyway, first boot continued to login, but:
>>
>> [ OK ] Started Update UTMP about System Runlevel Changes.
>>
>> Fedora 30 (Server Edition)
>> Kernel 4.20.0-0.rc5.git1.1.fc30.armv7hl on an armv7l (ttySAC2)
>>
>> Web console:
https://localhost.localdomain:9090/
>>
>> localhost login: root
>> Password:
>> -- root: no shell: Permission denied
>>
>> Fedora 30 (Server Edition)
>> Kernel 4.20.0-0.rc5.git1.1.fc30.armv7hl on an armv7l (ttySAC2)
>>
>> Web console:
https://localhost.localdomain:9090/
>>
>> localhost login: root
>> Password:
>> Last login: Sun Oct 28 20:34:22 on ttySAC2
>> -- root: no shell: Permission denied
>>
>> Fedora 30 (Server Edition)
>> Kernel 4.20.0-0.rc5.git1.1.fc30.armv7hl on an armv7l (ttySAC2)
>>
>> Web console:
https://localhost.localdomain:9090/
>>
>> localhost login: rgm
>> Password:
>> -- rgm: no shell: Permission denied
>>
>> Fedora 30 (Server Edition)
>> Kernel 4.20.0-0.rc5.git1.1.fc30.armv7hl on an armv7l (ttySAC2)
>>
>> Web console:
https://localhost.localdomain:9090/
>>
>> ===============================
>>
>> Why no shell? And can't get to the web console until I figure out if
Looks like an selinux issue, adding enforcing=0 to the kernel args should
get you logged in.
>> it got an IP address and which (I have to look into which VLAN that
>> port on the switch is).
>>
>> thanks
> Hmm. I forgot to grow the rootfs partition. Could it have been out of
> room?
>
> Right now I am falling back to trying F29 armfhp server.
Thats a better bet, its been tested and should just work for you.
Hmmm. gparted shows that I am using 1.64GB out of the base 2.33GB, but
I am going to do a complete install anyway and try again. And the vlan
I was plugged into did not have its dhcp server up and running, so I
switched ports to a different vlan
So I DID do a setup with F29, using the uboot from F30:
U-Boot 2018.09 (Sep 11 2018 - 09:51:41 +0000) for ODROID-XU3/XU4/HC1
CPU: Exynos5422 @ 800 MHz
Model: Odroid XU3 based on EXYNOS5422
Board: Odroid XU3 based on EXYNOS5422
Type: hc1
DRAM: 2 GiB
MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 2
It works. I am logged in as root on the console. I have a network
connection (have not tested the web admin yet). I wanted to see the
random entropy:
# cat /proc/sys/kernel/random/entropy_avail
3413
Nice! I did not have to add any rng tools almost double what I see on
my Cubietrucks (as I recall).
So supposedly since F28 and definitely F29, the steps for getting Fedora
working on an Odroid-HC1 are straight-forward. Just not directly
supported. You do have to get a recent copy of the uboot into your
hardkernel directory.
Next is get F30 rawhide working then start testing what I can get on the
sata drive.