Sorry it took me so long to get back. I have just tested kernel
4.15.0-0.rc0.git7.2.fc28.armv7hl and can confirm that indeed, USB 3
devices are now recognized as is the onboard gigabit ethernet port.
However, the system still requires the "cpuidle.off=1" argument on the
"append" line of the extlinux.conf file to boot.
On 11/21/2017 08:49 AM, Andreas Reschke wrote:
Am 15.11.2017 um 23:02 schrieb Stewart Samuels:
> So, to follow up with my last transmission, I did indeed down load the
> latest updates to both F26 & F27. The kernel I just tested on F27 is
> 4.13.12-200. It appears Andreas is correct in that USB 3 still does not
> respond from what I can see.
> On 11/15/2017 08:53 AM, Stewart Samuels wrote:
>> I was under the impression that the fix was going to be released into
>> kernel 4.15 based on this response from you Peter. And based on your
>> schedule, I was also under the impression that any of these fixes
>> likely would not go into earlier releases, so I haven't tested them.
>> As this was the last set of communications we have had regarding these
>> issues, I was not aware that you had actually pushed the upstream
>> patch. Now that I know you have, I will retest them by downloading
>> the latest updates to F27.
with the actuell kernel 4.15.0-0.rc0.git6.1.fc28.armv7hl it seems to work:
[root@odroidh1 ~]# lsusb
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 002: ID 0bda:8153 Realtek Semiconductor Corp. RTL8153
Gigabit Ethernet Adapter
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 002: ID 152d:0578 JMicron Technology Corp. / JMicron USA
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[root@odroidh1 ~]# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 118G 0 disk
├─sda1 8:1 0 680M 0 part
└─sda2 8:2 0 6,1M 0 part
mmcblk1 179:0 0 14,9G 0 disk
├─mmcblk1p1 179:1 0 29M 0 part
├─mmcblk1p2 179:2 0 488M 0 part /boot
├─mmcblk1p3 179:3 0 488M 0 part [SWAP]
└─mmcblk1p4 179:4 0 14G 0 part /
Now the onboard network and the ssd is working on my Odroid HC1. Next
test is the Odroid Xu4.
Thanks to everybody who made work.
arm mailing list -- arm(a)lists.fedoraproject.org
To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org