Hi Scott,
----- Original Message -----
Following guide on
https://fedoraproject.org/wiki/Architectures/ARM/F25/Installation#For_Ver....
Used images:
Fedora-Minimal-armhfp-25-1.3-sda.raw
Fedora-Minimal-armhfp-25-20161117.n.0-sda.raw
It was tested and working on Fedora 25 (using aarch64 and x86 hosts). Could you
provide some more details? What host are you using? Full output would also be
helpful.
Paul
Guest fails to boot with messages below.
Please advise.
[ OK ] Mounted Configuration File System.
[ 32.037543] ------------[ cut here ]------------
[ 32.038282] WARNING: CPU: 0 PID: 383 at
drivers/irqchip/irq-gic-common.c:80 gic_configure_irq+0x78/0xac
[ 32.039013] Modules linked in: virtio_net(+) virtio_scsi(+) virtio_mmio
virtio_ring virtio scsi_transport_iscsi
[ 32.040259] CPU: 0 PID: 383 Comm: systemd-udevd Not tainted
4.8.6-300.fc25.armv7hl #1
[ 32.040813] Hardware name: Generic DT based system
[ 32.041978] [<c02192f4>] (unwind_backtrace) from [<c0214108>]
(show_stack+0x18/0x1c)
[ 32.042647] [<c0214108>] (show_stack) from [<c0516624>]
(dump_stack+0x80/0x9c)
[ 32.043157] [<c0516624>] (dump_stack) from [<c0254f10>]
(__warn+0xe4/0x104)
[ 32.043689] [<c0254f10>] (__warn) from [<c0254fec>]
(warn_slowpath_null+0x24/0x2c)
[ 32.044163] [<c0254fec>] (warn_slowpath_null) from [<c0545188>]
(gic_configure_irq+0x78/0xac)
[ 32.044677] [<c0545188>] (gic_configure_irq) from [<c02abe54>]
(__irq_set_trigger+0x7c/0x178)
[ 32.045185] [<c02abe54>] (__irq_set_trigger) from [<c02ac448>]
(__setup_irq+0x4f8/0x5b8)
[ 32.045750] [<c02ac448>] (__setup_irq) from [<c02ac678>]
(request_threaded_irq+0xbc/0x174)
[ 32.046719] [<c02ac678>] (request_threaded_irq) from [<bf062758>]
(vm_find_vqs+0x4c/0x2f8 [virtio_mmio])
[ 32.047501] [<bf062758>] (vm_find_vqs [virtio_mmio]) from [<bf0a2ca0>]
(virtscsi_init+0xc8/0x1d0 [virtio_scsi])
[ 32.048125] [<bf0a2ca0>] (virtscsi_init [virtio_scsi]) from [<bf0a2e90>]
(virtscsi_probe+0xe8/0x2d8 [virtio_scsi])
[ 32.048915] [<bf0a2e90>] (virtscsi_probe [virtio_scsi]) from [<bf0226e0>]
(virtio_dev_probe+0x114/0x220 [virtio])
[ 32.049706] [<bf0226e0>] (virtio_dev_probe [virtio]) from [<c0630318>]
(driver_probe_device+0x1d0/0x3e8)
[ 32.050283] [<c0630318>] (driver_probe_device) from [<c06305b8>]
(__driver_attach+0x88/0xf8)
[ 32.050849] [<c06305b8>] (__driver_attach) from [<c062e5b0>]
(bus_for_each_dev+0x84/0x94)
[ 32.051417] [<c062e5b0>] (bus_for_each_dev) from [<c062f7dc>]
(bus_add_driver+0x180/0x234)
[ 32.051957] [<c062f7dc>] (bus_add_driver) from [<c0631134>]
(driver_register+0xa8/0xe8)
[ 32.052506] [<c0631134>] (driver_register) from [<bf0a809c>]
(init+0x9c/0x1000 [virtio_scsi])
[ 32.053107] [<bf0a809c>] (init [virtio_scsi]) from [<c0209d48>]
(do_one_initcall+0x130/0x158)
[ 32.053689] [<c0209d48>] (do_one_initcall) from [<c034b188>]
(do_init_module+0x60/0x1d8)
[ 32.054201] [<c034b188>] (do_init_module) from [<c02d7950>]
(load_module+0x1ae4/0x2120)
[ 32.054774] [<c02d7950>] (load_module) from [<c02d81a0>]
(SyS_finit_module+0x94/0xc0)
[ 32.055317] [<c02d81a0>] (SyS_finit_module) from [<c020fb80>]
(ret_fast_syscall+0x0/0x3c)
[ 32.055973] ---[ end trace 8580c707e4338642 ]---
[ 32.056360] genirq: Setting trigger mode 1 for irq 51 failed
(gic_set_type+0x0/0x6c)
[ 32.064328] ------------[ cut here ]------------
[ 32.064759] WARNING: CPU: 0 PID: 381 at
drivers/irqchip/irq-gic-common.c:80 gic_configure_irq+0x78/0xac
[ 32.065372] Modules linked in: virtio_net(+) virtio_scsi(+) virtio_mmio
virtio_ring virtio scsi_transport_iscsi
[ 32.066367] CPU: 0 PID: 381 Comm: systemd-udevd Tainted: G W
4.8.6-300.fc25.armv7hl #1
[ 32.066987] Hardware name: Generic DT based system
[ 32.067330] [<c02192f4>] (unwind_backtrace) from [<c0214108>]
(show_stack+0x18/0x1c)
[ 32.067872] [<c0214108>] (show_stack) from [<c0516624>]
(dump_stack+0x80/0x9c)
[ 32.068397] [<c0516624>] (dump_stack) from [<c0254f10>]
(__warn+0xe4/0x104)
[ 32.068883] [<c0254f10>] (__warn) from [<c0254fec>]
(warn_slowpath_null+0x24/0x2c)
[ 32.069390] [<c0254fec>] (warn_slowpath_null) from [<c0545188>]
(gic_configure_irq+0x78/0xac)
[ 32.069826] [<c0545188>] (gic_configure_irq) from [<c02abe54>]
(__irq_set_trigger+0x7c/0x178)
[ 32.070217] [<c02abe54>] (__irq_set_trigger) from [<c02ac448>]
(__setup_irq+0x4f8/0x5b8)
[ 32.070636] [<c02ac448>] (__setup_irq) from [<c02ac678>]
(request_threaded_irq+0xbc/0x174)
[ 32.071086] [<c02ac678>] (request_threaded_irq) from [<bf062758>]
(vm_find_vqs+0x4c/0x2f8 [virtio_mmio])
[ 32.071618] [<bf062758>] (vm_find_vqs [virtio_mmio]) from [<bf0ad934>]
(init_vqs+0x1f0/0x3a8 [virtio_net])
[ 32.072160] [<bf0ad934>] (init_vqs [virtio_net]) from [<bf0af3fc>]
(virtnet_probe+0x524/0x890 [virtio_net])
[ 32.072687] [<bf0af3fc>] (virtnet_probe [virtio_net]) from [<bf0226e0>]
(virtio_dev_probe+0x114/0x220 [virtio])
[ 32.073218] [<bf0226e0>] (virtio_dev_probe [virtio]) from [<c0630318>]
(driver_probe_device+0x1d0/0x3e8)
[ 32.073712] [<c0630318>] (driver_probe_device) from [<c06305b8>]
(__driver_attach+0x88/0xf8)
[ 32.074111] [<c06305b8>] (__driver_attach) from [<c062e5b0>]
(bus_for_each_dev+0x84/0x94)
[ 32.074489] [<c062e5b0>] (bus_for_each_dev) from [<c062f7dc>]
(bus_add_driver+0x180/0x234)
[ 32.074927] [<c062f7dc>] (bus_add_driver) from [<c0631134>]
(driver_register+0xa8/0xe8)
[ 32.075347] [<c0631134>] (driver_register) from [<c0209d48>]
(do_one_initcall+0x130/0x158)
[ 32.075795] [<c0209d48>] (do_one_initcall) from [<c034b188>]
(do_init_module+0x60/0x1d8)
[ 32.076222] [<c034b188>] (do_init_module) from [<c02d7950>]
(load_module+0x1ae4/0x2120)
[ 32.076631] [<c02d7950>] (load_module) from [<c02d81a0>]
(SyS_finit_module+0x94/0xc0)
[ 32.076991] [<c02d81a0>] (SyS_finit_module) from [<c020fb80>]
(ret_fast_syscall+0x0/0x3c)
[ 32.077356] ---[ end trace 8580c707e4338643 ]---
[ 32.077629] genirq: Setting trigger mode 1 for irq 50 failed
(gic_set_type+0x0/0x6c)
[ 32.127129] virtio_net: probe of virtio0 failed with error -22
[ 32.153173] ------------[ cut here ]------------
[ 32.153554] WARNING: CPU: 0 PID: 383 at kernel/irq/manage.c:1478
__free_irq+0xb0/0x29c
[ 32.154061] Trying to free already-free IRQ 51
[ 32.154322] Modules linked in: virtio_net virtio_scsi(+) virtio_mmio
virtio_ring virtio scsi_transport_iscsi
[ 32.154940] CPU: 0 PID: 383 Comm: systemd-udevd Tainted: G W
4.8.6-300.fc25.armv7hl #1
[ 32.155355] Hardware name: Generic DT based system
[ 32.155677] [<c02192f4>] (unwind_backtrace) from [<c0214108>]
(show_stack+0x18/0x1c)
[ 32.156110] [<c0214108>] (show_stack) from [<c0516624>]
(dump_stack+0x80/0x9c)
[ 32.156676] [<c0516624>] (dump_stack) from [<c0254f10>]
(__warn+0xe4/0x104)
[ 32.157107] [<c0254f10>] (__warn) from [<c0254f6c>]
(warn_slowpath_fmt+0x3c/0x4c)
[ 32.157590] [<c0254f6c>] (warn_slowpath_fmt) from [<c02aae98>]
(__free_irq+0xb0/0x29c)
[ 32.158048] [<c02aae98>] (__free_irq) from [<c02ab138>]
(free_irq+0x64/0x70)
[ 32.158490] [<c02ab138>] (free_irq) from [<bf0a2d5c>]
(virtscsi_init+0x184/0x1d0 [virtio_scsi])
[ 32.158990] [<bf0a2d5c>] (virtscsi_init [virtio_scsi]) from [<bf0a2e90>]
(virtscsi_probe+0xe8/0x2d8 [virtio_scsi])
[ 32.159630] [<bf0a2e90>] (virtscsi_probe [virtio_scsi]) from [<bf0226e0>]
(virtio_dev_probe+0x114/0x220 [virtio])
[ 32.160294] [<bf0226e0>] (virtio_dev_probe [virtio]) from [<c0630318>]
(driver_probe_device+0x1d0/0x3e8)
[ 32.160818] [<c0630318>] (driver_probe_device) from [<c06305b8>]
(__driver_attach+0x88/0xf8)
[ 32.161295] [<c06305b8>] (__driver_attach) from [<c062e5b0>]
(bus_for_each_dev+0x84/0x94)
[ 32.161772] [<c062e5b0>] (bus_for_each_dev) from [<c062f7dc>]
(bus_add_driver+0x180/0x234)
[ 32.162247] [<c062f7dc>] (bus_add_driver) from [<c0631134>]
(driver_register+0xa8/0xe8)
[ 32.162718] [<c0631134>] (driver_register) from [<bf0a809c>]
(init+0x9c/0x1000 [virtio_scsi])
[ 32.163160] [<bf0a809c>] (init [virtio_scsi]) from [<c0209d48>]
(do_one_initcall+0x130/0x158)
[ 32.163633] [<c0209d48>] (do_one_initcall) from [<c034b188>]
(do_init_module+0x60/0x1d8)
[ 32.164122] [<c034b188>] (do_init_module) from [<c02d7950>]
(load_module+0x1ae4/0x2120)
[ 32.164576] [<c02d7950>] (load_module) from [<c02d81a0>]
(SyS_finit_module+0x94/0xc0)
[ 32.165012] [<c02d81a0>] (SyS_finit_module) from [<c020fb80>]
(ret_fast_syscall+0x0/0x3c)
[ 32.165448] ---[ end trace 8580c707e4338644 ]---
[ 32.210567] virtio_scsi: probe of virtio1 failed with error -22
[ 414.027184] dracut-initqueue[354]: Warning: Could not boot.
[ 414.306136] dracut-initqueue[354]: Warning:
/dev/disk/by-uuid/c19816a7-cbb8-4cbb-8608-7fec6d4994d0 does not exist
Starting Dracut Emergency Shell...
Warning: /dev/disk/by-uuid/c19816a7-cbb8-4cbb-8608-7fec6d4994d0 does not
exist
_______________________________________________
arm mailing list -- arm(a)lists.fedoraproject.org
To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org