On Thu, Jul 16, 2015 at 8:40 AM, Zamir SUN <zsun(a)fedoraproject.org> wrote:
Hi team,
I am planning to test Fedora 23 ARM on Beagle Bone black from the early
image. So I downloaded Fedora-Xfce-armhfp-23-20150715-sda.raw.xz from
http://koji.fedoraproject.org/koji/taskinfo?taskID=10371084 and flash it
into a TF card.
During the flashing, I find such error:
= Writing image complete!
= Writing MLO for beaglebone....
dd: failed to open ‘/tmp/root/usr/share/uboot/beaglebone/MLO’: No such file
or directory
= Writing u-boot.img for beaglebone....
dd: failed to open ‘/tmp/root/usr/share/uboot/beaglebone/u-boot.img’: No
such file or directory
Looks like your task above, missed these crucial boot files..
= Installation Complete! Insert into the beaglebone and boot.
$
And then I just try to boot Beagle Bone Black from the image and find it do
not work. The serial output is as following:
U-Boot SPL 2014.04-00014-g47880f5 (Apr 22 2014 - 13:23:54)
reading args
spl_load_image_fat_os: error reading image args, err - -1
reading u-boot.img
reading u-boot.img
U-Boot 2014.04-00014-g47880f5 (Apr 22 2014 - 13:23:54)
I2C: ready
DRAM: 512 MiB
NAND: 0 MiB
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
*** Warning - readenv() failed, using default environment
Net: <ethaddr> not set. Validating first E-fuse MAC
cpsw, usb_ether
Hit any key to stop autoboot: 0
gpio: pin 53 (gpio 53) value is 1
mmc0 is current device
gpio: pin 54 (gpio 54) value is 1
SD/MMC found on device 0
** File not found uEnv.txt **
Checking if uenvcmd is set ...
uenvcmd was not defined in uEnv.txt ...
gpio: pin 56 (gpio 56) value is 0
gpio: pin 55 (gpio 55) value is 0
gpio: pin 54 (gpio 54) value is 0
mmc1(part 0) is current device
then it boot to my system on emmc. So am I wrong in some steps? Or the image
just can not boot up on Beagle Bone Black by design?
That old factory bootloader in the eMMC doesn't know about how to deal
with newer extlinux image's.
Regards,
--
Robert Nelson
https://rcn-ee.com/