3:14 a.m.
Follow this how to:
http://jonarcher.info/2015/02/getting-fedora-21-raspberry-pi-2/
I have load and update a official F21 arm7 (minimal install) on a new
raspberry PI 2, to make network backup of some server on a 1Gb USB hd
via rsync.
Linux s-backup-lampo 3.18.12-v7+ #783 SMP PREEMPT Tue May 5 22:48:52
BST 2015 armv7l armv7l armv7l GNU/Linux
Apparent all work find, but after a while rsync run, the mount point go
in read only mode and rsync stop to work with this error:
rsync: write failed on "/mnt/metal-bk-1t/temp2/dir/file":
Input/output error (5)
rsync error: error in file IO (code 11) at receiver.c(393) [receiver=3.1.1]
And in dmesg and journalctl I see a lot of this message:
mag 11 09:01:17 s-backup-lampo.ansaldisrl.it kernel: XFS (sda1):
xfs_log_force: error -5 returned.
....
If I try unmount the device, the umount command still blocked and into
journalctl I see this error:
mag 11 09:57:26 s-backup-lampo.ansaldisrl.it kernel: XFS (sda1):
xfs_log_force: error -5 returned.
mag 11 09:57:31 s-backup-lampo.ansaldisrl.it kernel: INFO: task umount:812 blocked for
more than 120 seconds.
mag 11 09:57:31 s-backup-lampo.ansaldisrl.it kernel: Not tainted 3.18.12-v7+ #783
mag 11 09:57:31 s-backup-lampo.ansaldisrl.it kernel: "echo 0 >
/proc/sys/kernel/hung_task_timeout_secs" disables this message.
mag 11 09:57:31 s-backup-lampo.ansaldisrl.it kernel: umount D 80521780 0
812 678 0x00000001
mag 11 09:57:31 s-backup-lampo.ansaldisrl.it kernel: [<80521780>] (__schedule) from
[<80521c70>] (schedule+0x40/0x8c)
mag 11 09:57:31 s-backup-lampo.ansaldisrl.it kernel: [<80521c70>] (schedule) from
[<7f259530>] (xfs_ail_push_all_sync+0xb8/0xf8 [xfs])
mag 11 09:57:31 s-backup-lampo.ansaldisrl.it kernel: [<7f259530>]
(xfs_ail_push_all_sync [xfs]) from [<7f2436e4>] (xfs_unmountfs+0x58/0x194 [xfs]
mag 11 09:57:31 s-backup-lampo.ansaldisrl.it kernel: [<7f2436e4>] (xfs_unmountfs
[xfs]) from [<7f24530c>] (xfs_fs_put_super+0x28/0x5c [xfs])
mag 11 09:57:31 s-backup-lampo.ansaldisrl.it kernel: [<7f24530c>] (xfs_fs_put_super
[xfs]) from [<8013ed4c>] (generic_shutdown_super+0x80/0xe8)
mag 11 09:57:31 s-backup-lampo.ansaldisrl.it kernel: [<8013ed4c>]
(generic_shutdown_super) from [<8013f0a0>] (kill_block_super+0x28/0x78)
mag 11 09:57:31 s-backup-lampo.ansaldisrl.it kernel: [<8013f0a0>]
(kill_block_super) from [<8013f400>] (deactivate_locked_super+0x6c/0x80)
mag 11 09:57:31 s-backup-lampo.ansaldisrl.it kernel: [<8013f400>]
(deactivate_locked_super) from [<8013fa00>] (deactivate_super+0x68/0x6c)
mag 11 09:57:31 s-backup-lampo.ansaldisrl.it kernel: [<8013fa00>]
(deactivate_super) from [<8015a900>] (cleanup_mnt+0x4c/0x88)
mag 11 09:57:31 s-backup-lampo.ansaldisrl.it kernel: [<8015a900>] (cleanup_mnt)
from [<8015a9b8>] (__cleanup_mnt+0x1c/0x20)
mag 11 09:57:32 s-backup-lampo.ansaldisrl.it kernel: [<8015a9b8>] (__cleanup_mnt)
from [<8003e6c8>] (task_work_run+0xc0/0xf0)
mag 11 09:57:32 s-backup-lampo.ansaldisrl.it kernel: [<8003e6c8>] (task_work_run)
from [<80012804>] (do_work_pending+0xd8/0xdc)
mag 11 09:57:32 s-backup-lampo.ansaldisrl.it kernel: [<80012804>] (do_work_pending)
from [<8000eb18>] (work_pending+0xc/0x20)
mag 11 09:57:43 s-backup-lampo.ansaldisrl.it sudo[835]: lesca : TTY=pts/2 ;
PWD=/home/lesca ; USER=root ; COMMAND=/bin/bash
mag 11 09:57:43 s-backup-lampo.ansaldisrl.it sudo[835]: pam_unix(sudo-i:session): session
opened for user root by lesca(uid=0)
mag 11 09:57:56 s-backup-lampo.ansaldisrl.it kernel: XFS (sda1): xfs_log_force: error -5
returned.
mag 11 09:58:26 s-backup-lampo.ansaldisrl.it kernel: XFS (sda1): xfs_log_force: error -5
returned.
mag 11 09:58:56 s-backup-lampo.ansaldisrl.it kernel: XFS (sda1): xfs_log_force: error -5
returned.
the only solution for get control of USB hd is restart the raspberry
I have test the USB disk on another PC whit fedora 21 with same kind
backup and work great
Someone have some suggest?
Many thanks for your help.
--
Dario Lesca
(inviato dal mio Linux Fedora 21 con Gnome 3.14)
4:14 p.m.
New subject: [SOLVED] Fedora 21 on Raspberry PI 2
Il giorno mar, 12/05/2015 alle 10.14 +0200, Dario Lesca ha scritto:
Follow this how to:
http://jonarcher.info/2015/02/getting-fedora-21-raspberry-pi-2/
I have load and update a official F21 arm7 (minimal install) on a new
raspberry PI 2, to make network backup of some server on a 1Gb USB hd
via rsync.
> Linux s-backup-lampo 3.18.12-v7+ #783 SMP PREEMPT Tue May 5 22:48:52 BST 2015 armv7l
armv7l armv7l GNU/Linux
Apparent all work find, but after a while rsync run, the mount point go
in read only mode and rsync stop to work with this error:
> rsync: write failed on "/mnt/metal-bk-1t/temp2/dir/file": Input/output
error (5)
> rsync error: error in file IO (code 11) at receiver.c(393) [receiver=3.1.1]
And in dmesg and journalctl I see a lot of this message:
> mag 11 09:01:17 s-backup-lampo.ansaldisrl.it kernel: XFS (sda1): xfs_log_force:
error -5 returned.
> ....
It was a power problem.
I have connect hard disk to a USB HUB powered an now all work fine!
Thanks.
--
Dario Lesca
(inviato dal mio Linux Fedora 21 con Gnome 3.14)
3:04 a.m.
New subject: [SOLVED] Fedora 21 on Raspberry PI 2
On 13/05/15 17:14, Dario Lesca wrote:
Il giorno mar, 12/05/2015 alle 10.14 +0200, Dario Lesca ha scritto:
> >Follow this how to:
> >
> >http://jonarcher.info/2015/02/getting-fedora-21-raspberry-pi-2/
> >
> >I have load and update a official F21 arm7 (minimal install) on a new
> >raspberry PI 2, to make network backup of some server on a 1Gb USB hd
> >via rsync.
> >
>> > >Linux s-backup-lampo 3.18.12-v7+ #783 SMP PREEMPT Tue May 5 22:48:52 BST
2015 armv7l armv7l armv7l GNU/Linux
> >
> >Apparent all work find, but after a while rsync run, the mount point go
> >in read only mode and rsync stop to work with this error:
> >
>> > >rsync: write failed on "/mnt/metal-bk-1t/temp2/dir/file":
Input/output error (5)
>> > >rsync error: error in file IO (code 11) at receiver.c(393)
[receiver=3.1.1]
> >
> >And in dmesg and journalctl I see a lot of this message:
> >
>> > >mag 11 09:01:17 s-backup-lampo.ansaldisrl.it kernel: XFS (sda1):
xfs_log_force: error -5 returned.
>> > >....
> >
It was a power problem.
I have connect hard disk to a USB HUB powered an now all work fine!
Thanks.
-- Dario Lesca (inviato dal mio Linux Fedora 21 con Gnome 3.14)
After seeing your message here I tried Jon Archer's image on the
raspberry pi 2 b and It does provide a working F-21!
However it looks like I will have to put in some more effort:
[bobg@raspberrypi ~]$ df -h
Filesystem Size Used Avail Use% Mounted on
/dev/root 1.3G 1.2G 44M 97% /
devtmpfs 460M 0 460M 0% /dev
tmpfs 464M 0 464M 0% /dev/shm
tmpfs 464M 364K 464M 1% /run
tmpfs 464M 0 464M 0% /sys/fs/cgroup
/dev/mmcblk0p1 488M 15M 474M 3% /boot
tmpfs 93M 0 93M 0% /run/user/1000
tmpfs 93M 0 93M 0% /run/user/0
It is limited by having everything stuffed into 2 gigs of a 16GB SD
card. However I am happy to see this much working and be able to work in
familiar territory instead of the orignal Raspian.
Bob
--
Bob Goodwin - Zuni, Virginia, USA
http://www.qrz.com/db/W2BOD
box10 FEDORA-22b/64bit LINUX XFCE
8:39 a.m.
New subject: [SOLVED] Fedora 21 on Raspberry PI 2
On 15/05/15 08:16, Johan Vromans wrote:
On Fri, 15 May 2015 04:04:14 -0400
"Bob Goodwin - Zuni, Virginia, USA"<bobgoodwin(a)wildblue.net> wrote:
> >It is limited by having everything stuffed into 2 gigs of a 16GB SD
> >card.
Just resize the root file system?
-- Johan
_______________________________________________
arm mailing list
First thing I tried to yum install gparted and it protested there
wasn't' enough room?
Thanks,
Bob
--
Bob Goodwin - Zuni, Virginia, USA
http://www.qrz.com/db/W2BOD
box10 FEDORA-22b/64bit LINUX XFCE
8:52 a.m.
New subject: [SOLVED] Fedora 21 on Raspberry PI 2
You're going the wrong way about it, see my post ;
https://lists.fedoraproject.org/pipermail/arm/2015-March/009206.html
Adrian ... vk4tux
On 15/05/15 23:39, Bob Goodwin - Zuni, Virginia, USA wrote:
On 15/05/15 08:16, Johan Vromans wrote:
> On Fri, 15 May 2015 04:04:14 -0400
> "Bob Goodwin - Zuni, Virginia, USA"<bobgoodwin(a)wildblue.net> wrote:
>
>> >It is limited by having everything stuffed into 2 gigs of a 16GB SD
>> >card.
> Just resize the root file system?
>
> -- Johan
> _______________________________________________
> arm mailing list
First thing I tried to yum install gparted and it protested there
wasn't' enough room?
Thanks,
Bob
9:26 a.m.
New subject: [SOLVED] Fedora 21 on Raspberry PI 2
On 15/05/15 09:52, Adrian wrote:
You're going the wrong way about it, see my post ;
https://lists.fedoraproject.org/pipermail/arm/2015-March/009206.html
Adrian ... vk4tux
Ok, I forgot about your input ...
I get to:
"cntrl X > y > enter to save"
and don't know what values to use for x and y. Presently df shows:
[root@raspberrypi bobg]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/root 1.3G 1.3G 11M 100% /
devtmpfs 460M 0 460M 0% /dev
tmpfs 464M 0 464M 0% /dev/shm
tmpfs 464M 332K 464M 1% /run
tmpfs 464M 0 464M 0% /sys/fs/cgroup
/dev/mmcblk0p1 488M 15M 474M 3% /boot
tmpfs 93M 0 93M 0% /run/user/1000
Tnx, Bob
--
Bob Goodwin - Zuni, Virginia, USA
http://www.qrz.com/db/W2BOD
box10 FEDORA-22b/64bit LINUX XFCE
9:40 a.m.
New subject: [SOLVED] Fedora 21 on Raspberry PI 2
On 16/05/15 00:26, Bob Goodwin - Zuni, Virginia, USA wrote:
On 15/05/15 09:52, Adrian wrote:
> You're going the wrong way about it, see my post ;
>
> https://lists.fedoraproject.org/pipermail/arm/2015-March/009206.html
>
> Adrian ... vk4tux
Ok, I forgot about your input ...
I get to:
"cntrl X > y > enter to save"
and don't know what values to use for x and y. Presently df shows:
Hold control key and tap X at same time
confirm save by tapping Y
Hit enter key
http://mintaka.sdsu.edu/reu/nano.html
10:17 a.m.
New subject: [SOLVED] Fedora 21 on Raspberry PI 2
On 15/05/15 10:40, Adrian wrote:
On 16/05/15 00:26, Bob Goodwin - Zuni, Virginia, USA wrote:
>
>
> On 15/05/15 09:52, Adrian wrote:
>> You're going the wrong way about it, see my post ;
>>
>> https://lists.fedoraproject.org/pipermail/arm/2015-March/009206.html
>>
>> Adrian ... vk4tux
>
> Ok, I forgot about your input ...
>
> I get to:
>
> "cntrl X > y > enter to save"
>
> and don't know what values to use for x and y. Presently df shows:
>
Hold control key and tap X at same time
confirm save by tapping Y
Hit enter key
http://mintaka.sdsu.edu/reu/nano.html
.
Ok, that appears to have worked:
[root@raspberrypi bobg]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/root 14G 1.3G 13G 9% /
devtmpfs 460M 0 460M 0% /dev
tmpfs 464M 0 464M 0% /dev/shm
tmpfs 464M 296K 464M 1% /run
tmpfs 464M 0 464M 0% /sys/fs/cgroup
/dev/mmcblk0p1 488M 15M 474M 3% /boot
tmpfs 93M 0 93M 0% /run/user/1000
I'm not sure how or why but it certainly increased the space available.
I will save the instructions to my Notecase notes!
Thank you for your patience,
Bob
--
Bob Goodwin - Zuni, Virginia, USA
http://www.qrz.com/db/W2BOD
box10 FEDORA-22b/64bit LINUX XFCE
10:25 a.m.
New subject: [SOLVED] Fedora 21 on Raspberry PI 2
I came up with that, borrowed from my experience with Pidora.
I build images for ham radio, FC21 on the PI2 has been outstanding,
using Clive's images as a base, and building on that. I package rpm's
with a yum repository.
Adrian ... vk4tux
On 16/05/15 01:17, Bob Goodwin - Zuni, Virginia, USA wrote:
On 15/05/15 10:40, Adrian wrote:
>
>
> On 16/05/15 00:26, Bob Goodwin - Zuni, Virginia, USA wrote:
>>
>>
>> On 15/05/15 09:52, Adrian wrote:
>>> You're going the wrong way about it, see my post ;
>>>
>>> https://lists.fedoraproject.org/pipermail/arm/2015-March/009206.html
>>>
>>> Adrian ... vk4tux
>>
>> Ok, I forgot about your input ...
>>
>> I get to:
>>
>> "cntrl X > y > enter to save"
>>
>> and don't know what values to use for x and y. Presently df shows:
>>
> Hold control key and tap X at same time
>
> confirm save by tapping Y
>
> Hit enter key
>
> http://mintaka.sdsu.edu/reu/nano.html
.
Ok, that appears to have worked:
[root@raspberrypi bobg]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/root 14G 1.3G 13G 9% /
devtmpfs 460M 0 460M 0% /dev
tmpfs 464M 0 464M 0% /dev/shm
tmpfs 464M 296K 464M 1% /run
tmpfs 464M 0 464M 0% /sys/fs/cgroup
/dev/mmcblk0p1 488M 15M 474M 3% /boot
tmpfs 93M 0 93M 0% /run/user/1000
I'm not sure how or why but it certainly increased the space
available. I will save the instructions to my Notecase notes!
Thank you for your patience,
Bob
4:51 p.m.
New subject: [SOLVED] Fedora 21 on Raspberry PI 2
On 15/05/15 11:25, Adrian wrote:
I came up with that, borrowed from my experience with Pidora.
I build images for ham radio, FC21 on the PI2 has been outstanding,
using Clive's images as a base, and building on that. I package rpm's
with a yum repository.
Adrian ... vk4tux
After trying everything I could find via Google, I have X sort of
working. I get the graphic log in screen but no keyboard or mouse after
I "startxfce4." However
I can "ssH -XC bobg@box83" from this computer and read the news on
Firefox 38 which I installed just to have something to test with, not as
zippy as on this box but it is actually usable.
Bob
--
Bob Goodwin - Zuni, Virginia, USA
http://www.qrz.com/db/W2BOD
box10 FEDORA-22b/64bit LINUX XFCE
5:58 p.m.
New subject: [SOLVED] Fedora 21 on Raspberry PI 2
Il giorno ven, 15/05/2015 alle 04.04 -0400, Bob Goodwin - Zuni,
Virginia, USA ha scritto:
It is limited by having everything stuffed into 2 gigs of a 16GB SD
card.
For re size the root partition I do this procedure:
# fdisk /dev/mmcblk0
Delete partition 3
Recreate partition 3
start from same start sector of previous
partition
size whatever you want.
write
# reboot
.....
# resize2fs /dev/mmcblk0p3
done.
Hope this help.
--
Dario Lesca
(inviato dal mio Linux Fedora 21 con Gnome 3.14)
2:17 a.m.
New subject: [SOLVED] Fedora 21 on Raspberry PI 2
On 15/05/15 18:58, Dario Lesca wrote:
For re size the root partition I do this procedure:
# fdisk /dev/mmcblk0
Delete partition 3
Recreate partition 3
start from same start sector of previous
partition
size whatever you want.
write
# reboot
.....
# resize2fs /dev/mmcblk0p3
done.
Hope this help.
-- Dario Lesca (inviato dal mio Linux Fedora 21 con Gnome 3.14)
.
Everything helps ...
This thread especially.
Thank you,
Bob
--
Bob Goodwin - Zuni, Virginia, USA
http://www.qrz.com/db/W2BOD
box10 FEDORA-22b/64bit LINUX XFCE
3268
days inactive
3273
days old
12 comments
4 participants
participants (4)
-
Adrian -
Bob Goodwin -
Dario Lesca -
Johan Vromans