----- Original Message -----
Ya!!
Thank you Peter for getting this done. I know it's been hard going.
I have done initial testing (install/bootup, user created, able to log
in remotely) of the following
Fedora-IoT-29-20190317.1.x86_64.raw.gz
- x86_64 virtual machine
Fedora-IoT-ostree-x86_64-29-20190317.1.iso
- x86_64 virtual machine
Fedora-IoT-29-20190317.1.aarch64.raw.xz
- Raspberry Pi3 A+
- Raspberry Pi3 B
- Raspberry Pi3 B+
Thus far, nothing negative to report. Even the wireless for the A+
came right up without any problems.
No issues here either. Output is displayed on both serial console (when enabled)
and display on the Rpi3's.
I'm going to run through most of the testing-day tests. Except
for
the start and restart ssh service. That's a bit of a pain on real
hardware if you don't have enough serial console or hdmi cables.
The service manipulation tests are a pain :) . I'll take those.
Thanks to everyone testing, this one looks good for release tomorrow.
Paul
>
> Troy
>
> On Sun, Mar 17, 2019 at 12:55 PM Peter Robinson <pbrobinson(a)gmail.com> wrote:
> >
> > Hi All,
> >
> > After way too long we have a new 29.1 RC with a number of issues fixed
> > including the boot issues on the Raspberry Pi 3 series and I suspect
> > other U-Boot based devices too. I'm pretty confident this one fixes
> > the core outstanding issues we have so please test and report success
> > and failures.
> >
> > Images and installers for testing can be found here, once we've
> > confirmed it looks OK it'll be pushed live:
> >
https://kojipkgs.fedoraproject.org/compose/iot/Fedora-IoT-29-20190317.1/c...
> >
> > For those upgrading from the December release please do the following
> > to move over to the CDN backed infra, it'll likely be more speedy for
> > you:
> >
> > ostree remote delete fedora-iot
> > ostree remote add --set=gpg-verify=true
> > --set=gpgkeypath=/etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-iot-2019
> > --set=contenturl=mirrorlist=https://ostree.fedoraproject.org/iot/mirrorlist
> > fedora-iot 'https://ostree.fedoraproject.org/iot'
> >
> > For those with a Raspberry Pi running the December release to fix the
> > WiFi, once you've rebooted into the new version do the following
> > command and reboot again to fix the problems with the WiFi:
> >
> > cp /usr/lib/ostree-boot/efi/bcm283* /boot/efi/
> >
> > Noteable changes/fixes in this release:
> > * Kernel 4.20.16
> > * Support for Raspberry Pi 3A+
> > * Initiial support for Raspberry Pi CM3 based devices
> > * Fixed WiFi on the Raspberry Pi 3-series devices
> > * runc CVE fixes
> > * usbguard added to allow lock down of USB ports
> > * podman 1.1.2 with numerous enhancements including forward ports for
> > rootless containers, see changelogs for full details here:
> >
https://github.com/containers/libpod/releases
> > * Much faster container downloads with latest skopeo
> >
https://github.com/containers/skopeo/releases/tag/v0.1.35
> > * TPM2 fixes and improvements
> > * Slimmed down linux-firmware
> > * Numerous other fixes, full package changes below:
> >
> > Regards,
> > Peter
> >
> > Upgraded:
> > NetworkManager 1:1.12.4-2.fc29 -> 1:1.12.6-5.fc29
> > NetworkManager-libnm 1:1.12.4-2.fc29 -> 1:1.12.6-5.fc29
> > NetworkManager-team 1:1.12.4-2.fc29 -> 1:1.12.6-5.fc29
> > NetworkManager-wifi 1:1.12.4-2.fc29 -> 1:1.12.6-5.fc29
> > NetworkManager-wwan 1:1.12.4-2.fc29 -> 1:1.12.6-5.fc29
> > anaconda-core 29.24.7-1.fc29 -> 29.24.7-2.fc29
> > anaconda-tui 29.24.7-1.fc29 -> 29.24.7-2.fc29
> > arm-image-installer 2.8-1.fc29 -> 2.10-1.fc29
> > audit 3.0-0.4.20180831git0047a6c.fc29 -> 3.0-0.5.20181218gitbdb72c0.fc29
> > audit-libs 3.0-0.4.20180831git0047a6c.fc29 ->
> > 3.0-0.5.20181218gitbdb72c0.fc29
> > bash 4.4.23-5.fc29 -> 4.4.23-6.fc29
> > bcm283x-firmware 20181105-1.55e5912.fc29 -> 20190212-4.83977fe.fc29
> > bind-export-libs 32:9.11.4-10.P2.fc29 -> 32:9.11.5-4.P4.fc29
> > blivet-data 1:3.1.1-2.fc29 -> 1:3.1.2-2.fc29
> > checkpolicy 2.8-2.fc29 -> 2.8-3.fc29
> > container-selinux 2:2.76-1.git87fae85.fc29 -> 2:2.85-1.git92af7fd.fc29
> > containernetworking-plugins 0.7.3-2.fc29 -> 0.7.4-2.fc29
> > containers-common 1:0.1.32-2.dev.gite814f96.fc29 ->
> > 1:0.1.35-1.git404c5bd.fc29
> > crypto-policies 20181026-1.gitd42aaa6.fc29 -> 20190211-2.gite3eacfc.fc29
> > cryptsetup 2.0.5-1.fc29 -> 2.0.6-1.fc29
> > cryptsetup-libs 2.0.5-1.fc29 -> 2.0.6-1.fc29
> > curl 7.61.1-5.fc29 -> 7.61.1-10.fc29
> > dbus 1:1.12.10-1.fc29 -> 1:1.12.12-1.fc29
> > dbus-common 1:1.12.10-1.fc29 -> 1:1.12.12-1.fc29
> > dbus-daemon 1:1.12.10-1.fc29 -> 1:1.12.12-1.fc29
> > dbus-libs 1:1.12.10-1.fc29 -> 1:1.12.12-1.fc29
> > dbus-tools 1:1.12.10-1.fc29 -> 1:1.12.12-1.fc29
> > dbxtool 8-7.fc29 -> 8-8.fc29
> > device-mapper 1.02.152-1.fc29 -> 1.02.154-1.fc29
> > device-mapper-event 1.02.152-1.fc29 -> 1.02.154-1.fc29
> > device-mapper-event-libs 1.02.152-1.fc29 -> 1.02.154-1.fc29
> > device-mapper-libs 1.02.152-1.fc29 -> 1.02.154-1.fc29
> > dhcp-client 12:4.3.6-28.fc29 -> 12:4.3.6-29.fc29
> > dhcp-common 12:4.3.6-28.fc29 -> 12:4.3.6-29.fc29
> > dhcp-libs 12:4.3.6-28.fc29 -> 12:4.3.6-29.fc29
> > dnf-data 4.0.9-1.fc29 -> 4.1.0-1.fc29
> > dracut 049-11.git20181024.fc29 -> 049-25.git20181204.fc29
> > dracut-config-generic 049-11.git20181024.fc29 -> 049-25.git20181204.fc29
> > dracut-network 049-11.git20181024.fc29 -> 049-25.git20181204.fc29
> > dtc 1.4.7-1.fc29 -> 1.4.7-2.fc29
> > e2fsprogs 1.44.3-1.fc29 -> 1.44.4-1.fc29
> > e2fsprogs-libs 1.44.3-1.fc29 -> 1.44.4-1.fc29
> > efivar-libs 35-4.fc29 -> 37-1.fc29
> > elfutils-default-yama-scope 0.174-5.fc29 -> 0.176-1.fc29
> > elfutils-libelf 0.174-5.fc29 -> 0.176-1.fc29
> > elfutils-libs 0.174-5.fc29 -> 0.176-1.fc29
> > fedora-gpg-keys 29-2 -> 29-3
> > fedora-release 29-4 -> 29-7
> > fedora-release-iot 29-4 -> 29-7
> > fedora-repos 29-2 -> 29-3
> > file 5.34-6.fc29 -> 5.34-13.fc29
> > file-libs 5.34-6.fc29 -> 5.34-13.fc29
> > glib2 2.58.1-1.fc29 -> 2.58.3-1.fc29
> > glibc 2.28-23.fc29 -> 2.28-26.fc29
> > glibc-common 2.28-23.fc29 -> 2.28-26.fc29
> > glibc-langpack-en 2.28-23.fc29 -> 2.28-26.fc29
> > gmp 1:6.1.2-8.fc29 -> 1:6.1.2-9.fc29
> > gnupg2 2.2.11-1.fc29 -> 2.2.13-1.fc29
> > gnutls 3.6.4-4.fc29 -> 3.6.6-1.fc29
> > gobject-introspection 1.58.1-1.fc29 -> 1.58.3-1.fc29
> > gpgme 1.11.1-3.fc29 -> 1.12.0-1.fc29
> > ipcalc 0.2.4-2.fc29 -> 0.2.4-4.fc29
> > iproute 4.18.0-3.fc29 -> 4.20.0-1.fc29
> > kernel 4.19.7-300.fc29 -> 4.20.16-200.fc29
> > kernel-core 4.19.7-300.fc29 -> 4.20.16-200.fc29
> > kernel-modules 4.19.7-300.fc29 -> 4.20.16-200.fc29
> > kernel-tools 4.19.7-300.fc29 -> 4.20.16-200.fc29
> > kernel-tools-libs 4.19.7-300.fc29 -> 4.20.16-200.fc29
> > krb5-libs 1.16.1-21.fc29 -> 1.16.1-25.fc29
> > langtable 0.0.39-1.fc29 -> 0.0.41-1.fc29
> > langtable-data 0.0.39-1.fc29 -> 0.0.41-1.fc29
> > libassuan 2.5.1-4.fc29 -> 2.5.2-1.fc29
> > libblockdev 2.20-2.fc29 -> 2.21-1.fc29
> > libblockdev-utils 2.20-2.fc29 -> 2.21-1.fc29
> > libcap-ng 0.7.9-4.fc29 -> 0.7.9-5.fc29
> > libcom_err 1.44.3-1.fc29 -> 1.44.4-1.fc29
> > libcomps 0.1.8-14.fc29 -> 0.1.10-2.fc29
> > libcurl 7.61.1-5.fc29 -> 7.61.1-10.fc29
> > libdnf 0.22.3-1.fc29 -> 0.26.0-1.fc29
> > libgcc 8.2.1-5.fc29 -> 8.3.1-2.fc29
> > libgcrypt 1.8.3-3.fc29 -> 1.8.4-1.fc29
> > libgomp 8.2.1-5.fc29 -> 8.3.1-2.fc29
> > libgpg-error 1.31-2.fc29 -> 1.33-1.fc29
> > libgpiod 1.2-1.fc29 -> 1.2.1-1.fc29
> > libgpiod-utils 1.2-1.fc29 -> 1.2.1-1.fc29
> > libidn2 2.0.5-2.fc29 -> 2.1.1a-1.fc29
> > libnetfilter_conntrack 1.0.6-6.fc29 -> 1.0.7-1.fc29
> > libpng 2:1.6.34-6.fc29 -> 2:1.6.34-7.fc29
> > libproxy 0.4.15-9.fc29 -> 0.4.15-10.fc29
> > librepo 1.9.1-1.fc29 -> 1.9.4-1.fc29
> > libreport 2.9.6-1.fc29 -> 2.10.0-1.fc29
> > libreport-anaconda 2.9.6-1.fc29 -> 2.10.0-1.fc29
> > libreport-cli 2.9.6-1.fc29 -> 2.10.0-1.fc29
> > libreport-filesystem 2.9.6-1.fc29 -> 2.10.0-1.fc29
> > libreport-plugin-bugzilla 2.9.6-1.fc29 -> 2.10.0-1.fc29
> > libreport-plugin-reportuploader 2.9.6-1.fc29 -> 2.10.0-1.fc29
> > libreport-web 2.9.6-1.fc29 -> 2.10.0-1.fc29
> > libsecret 0.18.6-2.fc29 -> 0.18.7-1.fc29
> > libselinux 2.8-4.fc29 -> 2.8-6.fc29
> > libselinux-utils 2.8-4.fc29 -> 2.8-6.fc29
> > libsemanage 2.8-4.fc29 -> 2.8-8.fc29
> > libsepol 2.8-2.fc29 -> 2.8-3.fc29
> > libsolv 0.7.1-2.fc29 -> 0.7.2-2.fc29
> > libss 1.44.3-1.fc29 -> 1.44.4-1.fc29
> > libssh 0.8.5-1.fc29 -> 0.8.7-1.fc29
> > libsss_idmap 2.0.0-4.fc29 -> 2.0.0-5.fc29
> > libsss_nss_idmap 2.0.0-4.fc29 -> 2.0.0-5.fc29
> > libsss_sudo 2.0.0-4.fc29 -> 2.0.0-5.fc29
> > libstdc++ 8.2.1-5.fc29 -> 8.3.1-2.fc29
> > libxcrypt 4.4.0-2.fc29 -> 4.4.4-1.fc29
> > libxml2 2.9.8-4.fc29 -> 2.9.8-5.fc29
> > libyaml 0.2.1-2.fc29 -> 0.2.1-5.fc29
> > libzstd 1.3.6-1.fc29 -> 1.3.8-1.fc29
> > linux-firmware 20181008-88.gitc6b6265d.fc29 ->
> > 20190213-93.git710963fe.fc29
> > lua-libs 5.3.5-2.fc29 -> 5.3.5-3.fc29
> > lvm2 2.02.182-1.fc29 -> 2.02.183-1.fc29
> > lvm2-libs 2.02.182-1.fc29 -> 2.02.183-1.fc29
> > lz4 1.8.2-2.fc29 -> 1.8.3-1.fc29
> > lz4-libs 1.8.2-2.fc29 -> 1.8.3-1.fc29
> > net-tools 2.0-0.52.20160912git.fc29 -> 2.0-0.53.20160912git.fc29
> > openldap 2.4.46-9.fc29 -> 2.4.46-10.fc29
> > openssh 7.9p1-2.fc29 -> 7.9p1-4.fc29
> > openssh-clients 7.9p1-2.fc29 -> 7.9p1-4.fc29
> > openssh-server 7.9p1-2.fc29 -> 7.9p1-4.fc29
> > openssl 1:1.1.1-3.fc29 -> 1:1.1.1b-2.fc29
> > openssl-libs 1:1.1.1-3.fc29 -> 1:1.1.1b-2.fc29
> > ostree 2018.9-1.fc29 -> 2019.1-3.fc29
> > ostree-grub2 2018.9-1.fc29 -> 2019.1-3.fc29
> > ostree-libs 2018.9-1.fc29 -> 2019.1-3.fc29
> > p11-kit 0.23.14-1.fc29 -> 0.23.15-2.fc29
> > p11-kit-trust 0.23.14-1.fc29 -> 0.23.15-2.fc29
> > pam 1.3.1-8.fc29 -> 1.3.1-15.fc29
> > pcre 8.42-5.fc29 -> 8.43-1.fc29
> > pcre2 10.32-4.fc29 -> 10.32-8.fc29
> > podman 1:0.10.1.3-4.gitdb08685.fc29 -> 1:1.1.2-1.git0ad9b6b.fc29
> > policycoreutils 2.8-8.fc29 -> 2.8-17.fc29
> > policycoreutils-python-utils 2.8-8.fc29 -> 2.8-17.fc29
> > polkit 0.115-2.fc29 -> 0.115-4.3.fc29
> > polkit-libs 0.115-2.fc29 -> 0.115-4.3.fc29
> > python-setuptools-wheel 40.4.3-1.fc29 -> 40.8.0-1.fc29
> > python3 3.7.1-4.fc29 -> 3.7.2-4.fc29
> > python3-audit 3.0-0.4.20180831git0047a6c.fc29 ->
> > 3.0-0.5.20181218gitbdb72c0.fc29
> > python3-blivet 1:3.1.1-2.fc29 -> 1:3.1.2-2.fc29
> > python3-blockdev 2.20-2.fc29 -> 2.21-1.fc29
> > python3-dateutil 1:2.7.0-3.fc29 -> 1:2.7.5-1.fc29
> > python3-dnf 4.0.9-1.fc29 -> 4.1.0-1.fc29
> > python3-gpg 1.11.1-3.fc29 -> 1.12.0-1.fc29
> > python3-hawkey 0.22.3-1.fc29 -> 0.26.0-1.fc29
> > python3-jsonschema 2.6.0-5.fc29 -> 2.6.0-6.fc29
> > python3-langtable 0.0.39-1.fc29 -> 0.0.41-1.fc29
> > python3-libcomps 0.1.8-14.fc29 -> 0.1.10-2.fc29
> > python3-libdnf 0.22.3-1.fc29 -> 0.26.0-1.fc29
> > python3-libreport 2.9.6-1.fc29 -> 2.10.0-1.fc29
> > python3-libs 3.7.1-4.fc29 -> 3.7.2-4.fc29
> > python3-libselinux 2.8-4.fc29 -> 2.8-6.fc29
> > python3-libsemanage 2.8-4.fc29 -> 2.8-8.fc29
> > python3-pid 2.1.1-9.fc29 -> 2.2.3-1.fc29
> > python3-policycoreutils 2.8-8.fc29 -> 2.8-17.fc29
> > python3-productmd 1.18-1.fc29 -> 1.19-1.fc29
> > python3-pyOpenSSL 18.0.0-3.fc29 -> 19.0.0-1.fc29
> > python3-setuptools 40.4.3-1.fc29 -> 40.8.0-1.fc29
> > python3-sssdconfig 2.0.0-4.fc29 -> 2.0.0-5.fc29
> > rpm-ostree 2018.9-3.fc29.1 -> 2019.2-1.fc29
> > rpm-ostree-libs 2018.9-3.fc29.1 -> 2019.2-1.fc29
> > rsync 3.1.3-4.fc29 -> 3.1.3-5.fc29
> > runc 2:1.0.0-59.dev.gitccb5efd.fc29 -> 2:1.0.0-68.dev.git6635b4f.fc29
> > selinux-policy 3.14.2-42.fc29 -> 3.14.2-51.fc29
> > selinux-policy-targeted 3.14.2-42.fc29 -> 3.14.2-51.fc29
> > skopeo 1:0.1.32-2.dev.gite814f96.fc29 -> 1:0.1.35-1.git404c5bd.fc29
> > sqlite-libs 3.24.0-2.fc29 -> 3.26.0-1.fc29
> > sssd-client 2.0.0-4.fc29 -> 2.0.0-5.fc29
> > sudo 1.8.25-1.fc29 -> 1.8.27-1.fc29
> > systemd 239-6.git9f3aed1.fc29 -> 239-12.git8bca462.fc29
> > systemd-libs 239-6.git9f3aed1.fc29 -> 239-12.git8bca462.fc29
> > systemd-pam 239-6.git9f3aed1.fc29 -> 239-12.git8bca462.fc29
> > systemd-udev 239-6.git9f3aed1.fc29 -> 239-12.git8bca462.fc29
> > tpm2-tools 3.1.3-1.fc29 -> 3.1.3-2.fc29
> > tpm2-tss 2.1.0-1.fc29 -> 2.1.2-1.fc29
> > tzdata 2018g-1.fc29 -> 2018i-1.fc29
> > uboot-images-armv8 2018.09-1.fc29 -> 2018.09-3.fc29
> > uboot-tools 2018.09-1.fc29 -> 2018.09-3.fc29
> > vim-minimal 2:8.1.549-1.fc29 -> 2:8.1.998-1.fc29
> > wpa_supplicant 1:2.6-17.fc29 -> 1:2.7-1.fc29
> > wpan-tools 0.8-3.fc29 -> 0.9-1.fc29
> > zchunk-libs 0.9.15-1.fc29 -> 1.0.3-1.fc29
> > Removed:
> > libmodulemd-1.7.0-1.fc29.aarch64
> > python3-IPy-0.81-23.fc29.noarch
> > Added:
> > libmodulemd1-1.8.2-3.fc29.aarch64
> > libqb-1.0.3-5.fc29.aarch64
> > linux-firmware-whence-20190213-93.git710963fe.fc29.noarch
> > protobuf-3.5.0-8.fc29.aarch64
> > usbguard-0.7.2-5.fc29.aarch64
> > Run "systemctl reboot" to start a reboot
> > _______________________________________________
> > IoT mailing list -- iot(a)lists.fedoraproject.org
> > To unsubscribe send an email to iot-leave(a)lists.fedoraproject.org
> > Fedora Code of Conduct:
https://getfedora.org/code-of-conduct.html
> > List Guidelines:
https://fedoraproject.org/wiki/Mailing_list_guidelines
> > List Archives:
> >
https://lists.fedoraproject.org/archives/list/iot@lists.fedoraproject.org
> _______________________________________________
> IoT mailing list -- iot(a)lists.fedoraproject.org
> To unsubscribe send an email to iot-leave(a)lists.fedoraproject.org
> Fedora Code of Conduct:
https://getfedora.org/code-of-conduct.html
> List Guidelines:
https://fedoraproject.org/wiki/Mailing_list_guidelines
> List Archives:
>
https://lists.fedoraproject.org/archives/list/iot@lists.fedoraproject.org
>