Problems with php/apache with test
by Mike old
I am having problems getting the same php files to work with FC2 test1
as with RH9
this is my /etc/httpd/conf/httpd.conf
handlers section
DefaultType text/plain
AddType text/html .shtml
AddHandler server-parsed .shtml
AddType application/x-httpd-php4 .php
AddType application/x-httpd-php .php
#AddType application/x-httpd-php4-source .php
the module is loaded but this is all I get
\n"); printf ("contact_idfirst_namelast_name\n"); do { $myrow =
pg_fetch_row ($result,$row); printf ("%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s
%s%s%s%s%s%s%s\n",$myrow[0], $myrow[1], $myrow[2],$myrow[3], $myrow[4],
$myrow[5], $myrow[6], $myrow[7], $myrow[8], $myrow[9], $myrow[10],$myrow
[11],$myrow[12],$myrow[13],$myrow[14],$myrow[15],$myrow[16],$myrow[17],
$myrow[18],$myrow[19],$myrow[20],$myrow[21],$myrow[22],$myrow[23],$myrow
[24]); $row++; } while ($row < $numrows); printf ("\n"); pg_close
($db); ?>
This is chopped off
<html>
<body>
<?php
$db = pg_connect("","","","","data_cc");
$query = "SELECT * FROM tb_contacts";
$result = pg_exec($db, $query);
if (!$result) {printf ("ERROR"); exit;}
$numrows = pg_numrows($result);
$row=0;
printf ("<table border=1 >\n");
printf ("<tr><td>c
any ideas what is happening here
20 years, 2 months
Mouse issues with updated 2.6.3 kernel via up2date and more
by Aaron Kincer
I too get the mouse problems with the start of the X server with the updated
kernel. I have tried the fix offered here of changing the psaux to mouse
in the config file but that doesn't work for me. Tried quite a few things
there but they were all very uneducated guesses.
Also, I have an HP psc 750xi scanner/copier/printer all in one. Printing
works fine (just don't try to print in GIMP). But the scanner doesn't work.
On RH9, I installed an HP sponsored driver that I found on sourceforge
(http://hpoj.sourceforge.net/download.shtml) and it worked fine. Is it that
2.6 hasn't incorporated the driver or hardware detection didn't configure
it? To be fair, the driver is at a .9.1 status. Anyone know?
20 years, 2 months
EPM Rebuilds?
by David McCormick
I am tying to rebuild a n old 32 bit program that I use daily and every
time I run rpm rebuild ar recompile I get this error. I tried to do
the ltconfig -- help thing but it just says command unknown. I have a
Athlon 64 FX-51, Asus SK8N board, ans scsi drives. Could someone point
me to the correct place to find answers to the rpm problem?
I use the following command:
[david@localhost david]$ rpmbuild --rebuild
/home/david/gnofin-0.8.4-1.src.rpm
checking for ANSI C header files... yes
checking host system type... Invalid configuration
`x86_64-unknown-linux-gnu': machine `x86_64-unknown' not recognized
checking build system type... Invalid configuration
`x86_64-unknown-linux-gnu': machine `x86_64-unknown' not recognized
checking for ranlib... ranlib
checking for ld used by GCC... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD-compatible nm... /usr/bin/nm -B
checking whether ln -s works... yes
updating cache ./config.cache
ltconfig: you must specify a host type if you use `--no-verify'
Try `ltconfig --help' for more information.
configure: error: libtool configure failed
error: Bad exit status from /home/david/rpmbuild/tmp/rpm-tmp.48192 (%build)
RPM build errors:
Bad exit status from /home/david/rpmbuild/tmp/rpm-tmp.48192 (%build)
Thanks
David McCormick
20 years, 2 months
Cyrus IMAP Mail Reverting to Unread
by Bob Chiodini
I have set up an IMAP email server under FC2T1. Establishing accounts,
configuring sendmail and configuring fetchmail all seem to be okay. The
problem is whenever I open a client (Evolution, Outlook Express, or
mozilla-mail) all of the messages in each folder appear unread even
though I have read them in another session.
Initially when reading a message it appears to be marked as read, but if
I exit and restart the client, all of the messages are again unread. As
a side note: I have evolution configured to copy sent mail into an IMAP
"sent" folder. This email too is marked as unread. It appears as if
the server never sets the status as read.
Googling returned one similar situation, but no solution.
Any ideas.
Bob...
20 years, 2 months
System Lockup from Screensaver - NVIDIA NForce2
by Brian Hanks
I've been testing FC2-Test1 since the beginning on a spare NVIDIA
NForce2 based system that I have (Asus A7N266-VM). The recurrent
problem that I am facing is that it locks up within a few minutes after
the screensaver kicks in. It is a hard lockup that cannot be cured
without a reboot. This problem has persisted through several upgrades
and is not help by disabling acpi (apm=off acpi=off pci=noacpi). I have
disabled all power management in the BIOS as well as in the kernel.
Any ideas?
Thanks,
-Brian Hanks
bhanks(a)bhanks.com
20 years, 2 months
Mouse not working after update
by Sean Hogston
Hi,
I just updated FC2 to the current level on my Dell D800 and in a
vmware session. In both of these cases when i rebooted X does not start
and says it cannot find a mouse. I played with the mouse device thinking
it changed and tried /dev/input/mouse /dev/mouse /dev/psaux /dev/psmouse
with no luck for any of them.
Both of these were fresh installs so when I did the updates the vmware
install pulled 1378 packages and the D800 install pulled 1452 so this
makes it impossible to narrow down what broke it.
Any suggestions would be great.
Sean
20 years, 2 months
up2date libgtop dependency problem
by Erich Hoover
The most recent batch of updates have a problem with the libgtop
dependencies (at least for me). It looks like some of the packages that
use the libgtop files want the exact version that's currently loaded and
aren't willing to take a more recent version. Is anyone else having
this same problem and has hopefully come up with a way to fix it?
20 years, 2 months
Automake problem
by Paul F. Johnson
Hi,
I've just downloaded the latest CVS of Scribus and have run
make -f Makefile.dist (this generates all the make, configure and wotnot
files).
It's been a while since I've made Scribus (despite being one of the
developers), but have noticed the following problem - I can't generate
the config/make/etc files. make -f Makefile.dist gives the following
output
configure.in:16: version mismatch. This is Automake 1.7.8,
configure.in:16: but the definition used by this AM_INIT_AUTOMAKE
configure.in:16: comes from Automake 1.4-p6. You should recreate
configure.in:16: aclocal.m4 with aclocal and run automake again.
/usr/share/automake-1.7/am/depend2.am: am__fastdepCC does not appear in
AM_CONDITIONAL
/usr/share/automake-1.7/am/depend2.am: AMDEP does not appear in
AM_CONDITIONAL
/usr/share/automake-1.7/am/depend2.am: am__fastdepCXX does not appear in
AM_CONDITIONAL
/usr/share/automake-1.7/am/depend2.am: am__fastdepCXX does not appear in
AM_CONDITIONAL
/usr/share/automake-1.7/am/depend2.am: AMDEP does not appear in
AM_CONDITIONAL
/usr/share/automake-1.7/am/depend2.am: am__fastdepCXX does not appear in
AM_CONDITIONAL
/usr/share/automake-1.7/am/depend2.am: AMDEP does not appear in
AM_CONDITIONAL
/usr/share/automake-1.7/am/depend2.am: am__fastdepCXX does not appear in
AM_CONDITIONAL
/usr/share/automake-1.7/am/depend2.am: AMDEP does not appear in
AM_CONDITIONAL
/usr/share/automake-1.7/am/depend2.am: am__fastdepCXX does not appear in
AM_CONDITIONAL
/usr/share/automake-1.7/am/depend2.am: AMDEP does not appear in
AM_CONDITIONAL
/usr/share/automake-1.7/am/depend2.am: am__fastdepCXX does not appear in
AM_CONDITIONAL
/usr/share/automake-1.7/am/depend2.am: AMDEP does not appear in
AM_CONDITIONAL
/usr/share/automake-1.7/am/depend2.am: am__fastdepCXX does not appear in
AM_CONDITIONAL
/usr/share/automake-1.7/am/depend2.am: AMDEP does not appear in
AM_CONDITIONAL
/usr/share/automake-1.7/am/depend2.am: am__fastdepCXX does not appear in
AM_CONDITIONAL
/usr/share/automake-1.7/am/depend2.am: AMDEP does not appear in
AM_CONDITIONAL
/usr/share/automake-1.7/am/depend2.am: am__fastdepCXX does not appear in
AM_CONDITIONAL
/usr/share/automake-1.7/am/depend2.am: AMDEP does not appear in
AM_CONDITIONAL
/usr/share/automake-1.7/am/depend2.am: am__fastdepCXX does not appear in
AM_CONDITIONAL
/usr/share/automake-1.7/am/depend2.am: AMDEP does not appear in
AM_CONDITIONAL
make[1]: *** [cvs] Error 1
make: *** [all] Error 2
I can't regenerate the aclocal.m4 file (well, I can, but I get the same
throwback errors).
It's been suggested that I remove automake 1.7.8 and go back to 1.7.2
(or whatever FC1 came with). I'm reluctant to do this as if there is a
problem with automake, it should be sorted.
I've not filed a bugzilla report yet as I'm not sure if it's a problem
with the scribus automake scripts or automake 1.7.8.
Suggestions welcome
TTFN
Paul
--
"Logic, my dear Zoe, is merely the ability to be wrong with authority"
Dr Who
20 years, 2 months
snd-cmi8330 not detected by kudzu
by G.Wolfe Woodbury
I have a motherboard with a CMI8330 soundchip. It works fine (within
the limits of the mixer problems) when I modprobe the snd-cmi8330.ko
module, but I have to hand mung the modprobe.conf file to get it
installed at boot time.
--
Gregory G. "Wolfe" Woodbury `-_-' Owner/Admin: wolves.durham.nc.us
ggw at wolves.durham.nc.us U RHCT August 2003
"The Line Eater is a boojum snark." Hug your wolf.
20 years, 2 months
