Mouse Wheel gone
by Christian Menzel
Since the latest xorg-X11 upgrade I receive the already mentioned XKB
error and the mouse wheel is not working anymore.
Has anybody seen this behavior?
Regards
Chris
5 years, 4 months
Re: NFS failure
by Fulko.Hew@sita.aero
Damian Menscher <menscher(a)uiuc.edu>@redhat.com on 04/07/2004 04:57:13 PM
wrote:
> On Wed, 7 Apr 2004, Jeff Elkins wrote:
>
> > I'm getting failure messages on my nfs mounts i.e. :
> >
> > mount to NFS server 'music.elkins' failed: server is down.
> >
> > nsfd appears to be running and I didn't see anything suspicious in the
logs.
> > The servers are up and running and have other clients connected.
>
> You didn't mention what steps you took to debug it:
>
> Can you ping the server?
> What is the output of rpcinfo -p servername?
> Does the server have access restrictions (firewall, TCP Wrappers, etc)?
I have the same symptoms...
rpcinfo says that nfs et.al. are running.
Something has changed in test 2, since the same PC running RH9
accesses that host just fine.
5 years, 4 months
Problem running OOo downloaded from openoffice.org
by Joe Smith
Installing the OO.org 2.4 packages on F9 beta, I get this message when
starting:
$ /opt/OOH680_m12/program/soffice
Gtk-Message: Failed to load module "gnomebreakpad":
/opt/OOH680_m12/program/libstdc++.so.6: version `GLIBCXX_3.4.9' not
found (required by /usr/lib/bug-buddy/libbreakpad.so.0)
OOo then starts and seems to run ok, but it will not run from a desktop
launcher using that same command, I presume because bug-buddy can't be
started.
I don't know what the Fedora policy is here: does it matter at this
point whether a third-party package isn't starting cleanly? Nor do I
understand the message well enough to decide who to report it to.
It seems that OOo uses it's own libstdc++ which is not compatible with
gnomebreakpad, but I've not found a way to have gnomebreakpad look
elsewhere for that library.
Any suggestions if/where to file a report, and/or how to workaround the
problem?
<Joe
12 years, 7 months
k3b complains about /dev/sr0
by Antonio Olivares
Dear all,
k3b is complaining about access to /dev/sr0
has there been a change that is causing this?
No write access to device /dev/sr0
K3b needs write access to all the devices to perform
certain tasks. Without it you might encounter problems
with HL-DT-ST - DVDRAM GMA-4082N
Solution: Make sure you have write access to /dev/sr0.
In case you are not using devfs or udev K3bSetup is
able to do this for you.
Mp3 Audio Decoder plugin not found.
K3b could not load or find the Mp3 decoder plugin.
This means that you will not be able to create Audio
CDs from Mp3 files. Many Linux distributions do not
include Mp3 support for legal reasons.
Solution: To enable Mp3 support, please install the
MAD Mp3 decoding library as well as the K3b MAD Mp3
decoder plugin (the latter may already be installed
but not functional due to the missing libmad). Some
distributions allow installation of Mp3 support via an
online update tool (i.e. SuSE's YOU).
TIA,
Antonio
12 years, 9 months
more mtrr/pat issues x86_64 4gb ram
by gjohnson5
I've been trying the rawhide kernels since PAT is now an option when
configuring the kernel, but on my desktop the mtrr are not configured
correctly assuming by the bios and disabling them makes system performance
drop to unusable levels. PAT hasn't function as of
kernel-2.6.26-0.43.rc4.git2.fc10
ASUS NCT-D ---> 1009001 bios
[gjohnson@localhost ~]$ cat /proc/mtrr
reg00: base=0xc0000000 (3072MB), size=1024MB: uncachable, count=1
reg01: base=0x00000000 ( 0MB), size=4096MB: write-back, count=1
reg02: base=0x100000000 (4096MB), size=1024MB: write-back, count=1
[gjohnson@localhost ~]$ cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 4
model name : Intel(R) Xeon(TM) CPU 3.60GHz
stepping : 3
cpu MHz : 3600.121
cache size : 2048 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 1
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 3
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm
constant_tsc pebs bts pni monitor ds_cpl est tm2 cid cx16 xtpr
bogomips : 7206.92
clflush size : 64
cache_alignment : 128
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 1
vendor_id : GenuineIntel
cpu family : 15
model : 4
model name : Intel(R) Xeon(TM) CPU 3.60GHz
stepping : 3
cpu MHz : 3600.121
cache size : 2048 KB
physical id : 3
siblings : 2
core id : 0
cpu cores : 1
apicid : 6
initial apicid : 6
fpu : yes
fpu_exception : yes
cpuid level : 3
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm
constant_tsc pebs bts pni monitor ds_cpl est tm2 cid cx16 xtpr
bogomips : 7200.16
clflush size : 64
cache_alignment : 128
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 2
vendor_id : GenuineIntel
cpu family : 15
model : 4
model name : Intel(R) Xeon(TM) CPU 3.60GHz
stepping : 3
cpu MHz : 3600.121
cache size : 2048 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 1
apicid : 1
initial apicid : 1
fpu : yes
fpu_exception : yes
cpuid level : 3
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm
constant_tsc pebs bts pni monitor ds_cpl est tm2 cid cx16 xtpr
bogomips : 7200.12
clflush size : 64
cache_alignment : 128
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 3
vendor_id : GenuineIntel
cpu family : 15
model : 4
model name : Intel(R) Xeon(TM) CPU 3.60GHz
stepping : 3
cpu MHz : 3600.121
cache size : 2048 KB
physical id : 3
siblings : 2
core id : 0
cpu cores : 1
apicid : 7
initial apicid : 7
fpu : yes
fpu_exception : yes
cpuid level : 3
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm
constant_tsc pebs bts pni monitor ds_cpl est tm2 cid cx16 xtpr
bogomips : 7200.18
clflush size : 64
cache_alignment : 128
address sizes : 36 bits physical, 48 bits virtual
power management:
[gjohnson@localhost ~]$
--
View this message in context: http://www.nabble.com/more-mtrr-pat-issues-x86_64-4gb-ram-tp17543465p1754...
Sent from the Fedora Test List mailing list archive at Nabble.com.
12 years, 10 months
Prep for F7 EOL Closure + Other BugZapper News
by John Poelstra
We want to move more of the processes (like the one below) out to the
wider bug triage community so that all the bug zappers have a view into
what we are doing on the infrastructure front.
I'm open for ways we should do this... maybe the time has come for our
own mailing list? Attendance at our IRC meetings has been thin and I'm
not sure why that is. I'm open to suggestions and constructive
criticism on how we should do meetings differently.
Below is a draft of the ticket I'm going to file with Red Hat
Engineering Operations (aka Eng Ops) to auto-close Fedora 7 bugs when it
goes EOL in a few weeks. Now my secret is out... this is "the bot"
everyone loves ;-)
If you have any proposed changes to the text please reply to the list by
2008-05-26 and then I'll transfer the final version to the wiki and file
with Eng Ops.
Thanks for reading,
John
~~~~~~~~~~~~~~~~~~~~~~~
Request Title: Fedora 7 EOL Bug Closing
Date to run: On or after June 15, 2008
Query to select bugs: http://tinyurl.com/3osskh
User making changes & comments: fedora-triage-list(a)redhat.com
Please script changes such that only ONE email notification is sent for
all changes.
Actions to take on all bugs selected in query above:
1) Change bug status to CLOSED:WONTFIX
2) Add the following comment:
=== START ====
Fedora 7 went to end-of-life status on June 13, 2008. Fedora 7 will no
longer maintained or receive updates. As a result we are closing this bug.
If you can reproduce this bug against a currently maintained version of
Fedora please feel free to reopen thus bug against that version.
Thank you for reporting this bug and we are sorry it could not be fixed.
=== END ====
12 years, 10 months
[OT] kde4 and compiz-fusion
by Gianluca Cecchi
Hello,
here I have F9 with X1900 card and using radeon driver.
Just released so I try to post here, marking [OT], thanks.
I'm using/testing kde4
I found the script compiz-check at
http://forlong.blogage.de/article/pages/Compiz-Check
It tells mr that all is ok....
[gcecchi@tekkaman ~]$ ./compiz-check
./compiz-check: line 65: lspci: command not found
Gathering information about your system...
Distribution: Fedora release 9 (Sulphur)
Desktop environment: KDE
Graphics chip: ATI Technologies Inc R580 [Radeon X1900 XT] (Primary)
Driver in use: radeon
Rendering method: AIGLX
Checking if it's possible to run Compiz on your system...
Checking for texture_from_pixmap... [ OK ]
Checking for non power of two support... [ OK ]
Checking for composite extension... [ OK ]
Checking for FBConfig... [ OK ]
Checking for hardware/setup problems... [ OK ]
lspci as root gives:
01:00.0 VGA compatible controller: ATI Technologies Inc R580 [Radeon X1900
XT] (Primary) (prog-if 00 [V
GA controller])
Subsystem: ATI Technologies Inc Unknown device 0d02
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at 80000000 (64-bit, prefetchable) [size=256M]
Memory at 90200000 (64-bit, non-prefetchable) [size=64K]
I/O ports at 2000 [size=256]
Expansion ROM at 90220000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Express Endpoint, MSI 00
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Enable-
but when running fusion-icon I get no title bars.
I can switch between metacity and kwin as windows managers but when I use
compiz, I get no title bars.
Also no effects at all.
Alrady tried to enable windows decorations.
If running fusion-icon inside an xterm I get this:
[gcecchi@tekkaman ~]$ fusion-icon
* Detected Session: kde
* Searching for installed applications...
* Using the GTK Interface
* Interface not installed
... Trying another interface
* Using the Qt4 Interface
* KWin is already running
then I set compiz as window manager:
* Setting window manager to Compiz
... executing: compiz --replace --sm-disable --ignore-desktop-hints ccp
--indirect-rendering
and no titles, no ability to switch between desktops, no minimize windows,
etc....
Here below my xorg.conf relevant parts. Thanks in advance for help
Section "ServerFlags"
Option "AIGLX" "on"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "radeon"
Option "AccelMethod" "EXA"
Option "XAANoOffscreenPixmaps" "True"
Option "ColorTiling" "on"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
Option "DAMAGE" "Enable"
Option "RENDER" "Enable"
Option "RandR" "on"
EndSection
Section "Module"
Load "drm"
Load "v4l"
Load "GLcore"
Load "type1"
Load "vbe"
EndSection
Section "DRI"
Mode 0666
EndSection
12 years, 10 months
No sound in Rawhide
by Antonio M
I made a fresh installation of F9 and then I switched to Rawhide.
Computer plays sound at logon and logout but no other sounds are
available, even when I go to System/Preferences/Hardware/Sound and I
run any test.
In my previous installation I hade a modprobe.conf file where sound
was defined as:
alias snd-card-0 snd-hda-intel
options snd-card-0 index=0 model=acer
options snd-hda-intel index=0
Any idea??
Tnx
--
Antonio Montagnani
Skype : antoniomontag
12 years, 10 months