Re: Criteria / validation proposal: drop Xen
by Adam Williamson
On Thu, 2017-07-06 at 15:13 -0400, Konrad Rzeszutek Wilk wrote:
> On Thu, Jul 06, 2017 at 11:59:01AM -0700, Adam Williamson wrote:
> > Hi, folks! A while ago, Xen virtualization functionality was added to
> > the criteria and the validation test case set, on the understanding
> > that Oracle would provide testing for it (and help fix bugs as they
> > arose).
> >
> > For the last couple of releases we really have not had any such testing
>
> We had been doing the testing, it just that we (or rather me and
> Dariof) seem to get a wind of this at the last minute. Not sure exactly
> how to fix that thought.
Well, I mean, every few *days* a compose gets nominated for validation
testing, and a mail is sent to test-announce. Just check your test-
announce archives for mails with "nominated for testing" in their
subject lines, and you'll see dozens. Is this not sufficient
notification?
> > from Oracle. On that basis, I'm proposing we remove this Final
> > criterion:
>
> s/Oracle/Xen Project/ I believe?
Perhaps, it's just that it always seemed to be you doing the testing,
so they got a bit conflated :)
> > "The release must boot successfully as Xen DomU with releases providing
> > a functional, supported Xen Dom0 and widely used cloud providers
> > utilizing Xen."
> >
> > and change the 'milestone' for the test case -
> > https://fedoraproject.org/wiki/QA:Testcase_Boot_Methods_Xen_Para_Virt -
> > from Final to Optional.
> >
> > Thoughts? Comments? Thanks!
>
> I would prefer for it to remain as it is.
This is only practical if it's going to be tested, and tested regularly
- not *only* on the final release candidate, right before we sign off
on the release. It needs to be tested regularly throughout the release
cycle, on the composes that are "nominated for testing".
Thanks!
--
Adam Williamson
Fedora QA Community Monkey
IRC: adamw | Twitter: AdamW_Fedora | XMPP: adamw AT happyassassin . net
http://www.happyassassin.net
3 months, 3 weeks
- 7
- 9
Self-introduction: Julian Schlüntz
by Julian Schlüntz
Hello everyone,
my name is Julian Schlüntz, I have been using Fedora for a long time (I
think since Fedora Core 3) and it is time I started contributing. I like
testing stuff and figuring out problems, so I figured QA would be the
right place for me.
I am from Germany, 31 years old and have some development experience.
My IRC nickname is 'gapophustu'.
Cheers
10 months, 3 weeks
- 2
- 1
Self-Introduction: Ryan Himmelwright
by Ryan Himmelwright
Hi Everyone,
My name is Ryan Himmelwright and often go by himmAllRight on the
internet and IRC. Outside the web, I've spent the last few years in the
greater Boston area, but have recently moved to Durham NC (both USA).
I have been lurking around the various Fedora groups over the last few
years, but have never fully taken the plunge into a project. I am
interested in becoming more involved with the QA group, in particular to
help develop some of the testing tools (in addition to some package
testing).
I am a Linux and open source enthusiast and have been using Linux as my
main driver for over 8 years now. I work as a software developer that
unfortunately builds web applications to run on Windows (I don't get it
either). I primarily use Common Lisp at my day job to develop large,
automated, build systems, but am also familiar with Python, R, Go, and a
bit of C. While I spend my work day in Windows, I use my early mornings
and weekends learning everything I can about Linux. I am hoping to
finally put some of those skills to use with the Fedora community .
- Ryan
10 months, 3 weeks
- 2
- 1
Self-introduction: Péter Tóth
by Peter Toth
Hello,
I'm a big fan of Fedora and want to contribute somehow to the Fedora QA.
I currently study electrical engineering at the Brno University of Technogy
in Brno, Czech republic and I'm also interested in computers generaly. I
mean just to imagine the "flying" electrons inside the silicon of the ICs
or just to bring my thoughts to the "other side" and think about anything
relating to UNIX-like operating systems and it's applications. I also enjoy
learning new things about how the things work on the Linux, and for this
reason I thought it would be interesting to see and be part of the team
which manages the testing in order to find out what is not working
properly. :-)
Also currently I am an intern at the Red Hat's Brno office. I do have
experience with using and administrating Fedora and also RHEL, RHEV.... In
the field of programming I do have experience with C language, Python,
markup languages and not so markup language as YAML, also I do shell
scripting in BASH and sometimes I trying to be POSIX compliant with it. :-)
I am available also on:
ICQ: 405778592
IRC ptoth(at)irc.freenode.net
e-mail: xtothp00(at)stud.feec.vutbr.cz -- alternative
I am looking forward to work with you!
Kind regards,
--
Péter Tóth
10 months, 3 weeks
- 2
- 1
Introduction - Diego Damian
by Diego Damián
Hi guys,
My name is Diego Aaron, I'm 26 years old and live at Lima Perú. I have
started using Linux for a couple of months now, since I am preparing for
the LPIC I certification.
I am also learning about Java programming and application testing in a
personal way. I have more experience in configuring Cisco network equipment.
I'm very glad to join at Fedora QA Team. I have working with Red Hat Linux
in my work since six months ago. So, let's time to
contribute with the project.
So, thanks a lot for some people who accepted me at Fedora Project.
At my signature I'm sending my contacts fell free if anyone want to contact
me.
Bye
--
Att.
Diego Damian
-------------------------
Contacts
email: diegoaarondv(a)gmail.com
irc nickname: diegoaaron909
10 months, 3 weeks
- 3
- 2
Introduction
by Jaydeep Godara
Hello,
I am Jaydeep Godara and pursuing my B.Tech in Computer Science.
I am using Linux from more than year and fedora for last six months.
Currently I am working with Python and Machine Learning.
I want to contribute to fedora and testing is most fitted option for me
right now.
Links:
Github:
https://github.com/JaydeepGo
Twitter:
https://twitter.com/JaydeepGo
IRC:
JaydeepGo at freenode
10 months, 3 weeks
- 2
- 1
F29 test results
by pmkellly＠frontier.com
Just some information. I hope it helps.
I've tried out a couple of the recent drops (08/25 & 08/26) of Fedora 29
Workstation-Live. These were bare metal installs from DVD on a Lenovo
M58. and The DVDs were checked with sha256sum -c beforehand The system
booted okay from the DVD and the media test ran okay before the
installation started.
Anaconda ran fine with all the expected options being presented. The
target hardware disk was already full; so the make more space available
option was selected. When the the window came up delete all was chosen
following by reclaim space. After that the installation process was as
expected with the live session starting normally. The restart was
selected from the top right menu and the DVD was removed from the drive;
so the system would boot from the freshly installed hard drive.
The boot proceeded normally with the wallpaper displayed and the top
right menu displayed. However, the expected windows that should appear
for language etc, and user name password. did not display. The top right
menu shows a sub-menu choice for gnome-initial-setup, but the only item
in that sub-menu is logout. I tried logging out and back in, but the
resulting conditions were the same.
I have a small bit of experience running gbd when I helped with a gnome
issue last year, but in this particular situation I don't know how to
get started.
Please let me know if there is something else I can try or do to help.
Have a Great Day!
Pat (tablepc)
11 months, 3 weeks
- 2
- 1
Fedora 28 updates-testing report
by updates＠fedoraproject.org
The following Fedora 28 Security updates need testing:
Age URL
141 https://bodhi.fedoraproject.org/updates/FEDORA-2018-d510cfd7eb jgraphx-3.6.0.0-6.fc28
91 https://bodhi.fedoraproject.org/updates/FEDORA-2018-d7aeaa74da nodejs-brace-expansion-1.1.11-1.fc28
89 https://bodhi.fedoraproject.org/updates/FEDORA-2018-bc073fdc1a nodejs-atob-2.1.1-1.fc28
83 https://bodhi.fedoraproject.org/updates/FEDORA-2018-9dd3f7c013 unrtf-0.21.9-8.fc28
50 https://bodhi.fedoraproject.org/updates/FEDORA-2018-28e9841baf docker-latest-1.13.1-37.git9cb56fd.fc28
16 https://bodhi.fedoraproject.org/updates/FEDORA-2018-9565c0bc9a unixODBC-2.3.7-1.fc28
7 https://bodhi.fedoraproject.org/updates/FEDORA-2018-38bdbafa96 discount-2.2.4-1.fc28
7 https://bodhi.fedoraproject.org/updates/FEDORA-2018-f67fda3db6 community-mysql-5.7.23-1.fc28
3 https://bodhi.fedoraproject.org/updates/FEDORA-2018-be9f4838dd dokuwiki-20180422a-1.fc28
3 https://bodhi.fedoraproject.org/updates/FEDORA-2018-5ad77cc979 tcpflow-1.5.0-2.fc28
3 https://bodhi.fedoraproject.org/updates/FEDORA-2018-8344cb89ac yara-3.8.1-1.fc28
1 https://bodhi.fedoraproject.org/updates/FEDORA-2018-8fd21e2a72 python-pycryptodomex-3.6.6-1.fc28
1 https://bodhi.fedoraproject.org/updates/FEDORA-2018-83bc247d3b capstone-3.0.5-1.fc28
1 https://bodhi.fedoraproject.org/updates/FEDORA-2018-0ddef94854 mod_perl-2.0.10-11.fc28
1 https://bodhi.fedoraproject.org/updates/FEDORA-2018-07083800ac ghostscript-9.23-6.fc28
1 https://bodhi.fedoraproject.org/updates/FEDORA-2018-5bf744beee gd-2.2.5-6.fc28
The following Fedora 28 Critical Path updates have yet to be approved:
Age URL
14 https://bodhi.fedoraproject.org/updates/FEDORA-2018-a20e0e3c74 pungi-4.1.27-1.fc28
8 https://bodhi.fedoraproject.org/updates/FEDORA-2018-16c78b3d92 rpm-4.14.2-1.fc28
1 https://bodhi.fedoraproject.org/updates/FEDORA-2018-dd061fde81 perl-PathTools-3.75-1.fc28
1 https://bodhi.fedoraproject.org/updates/FEDORA-2018-fb2271134d glibc-2.27-32.fc28
1 https://bodhi.fedoraproject.org/updates/FEDORA-2018-bcb2a43254 lorax-28.18-1.fc28
1 https://bodhi.fedoraproject.org/updates/FEDORA-2018-5aab3345df flatpak-1.0.1-1.fc28
The following builds have been pushed to Fedora 28 updates-testing
R-littler-0.3.4-1.fc28
analitza-18.04.3-2.fc28
appmenu-qt5-0.3.0+16.10.20160628.1-10.fc28
buku-3.9-1.fc28
calibre-3.29.0-1.fc28
castxml-0.1-0.25.20180806gitae93121.fc28
cups-2.2.6-19.fc28
deepin-qt5integration-0.2.8.3-5.fc28
deepin-tool-kit-0.3.3-8.fc28
dmlite-1.10.4-2.fc28
dnscrypt-proxy-gui-1.11.15-2.fc28
dtkwidget-2.0.6.1-1.fc28.2
fbreader-0.99.4-2.fc28
fcitx-qt5-1.2.3-2.fc28
gammaray-2.9.0-4.fc28
gsettings-qt-0-0.11.20170715bzr83.fc28.2
iniparser-4.0-7.20160821git.fc28
iproute-4.17.0-3.fc28
js-jsroot-5.5.1-1.fc28
keepassxc-2.3.4-1.fc28
kf5-akonadi-server-18.04.3-2.fc28
kf5-frameworkintegration-5.48.0-2.fc28
kf5-kdeclarative-5.48.0-2.fc28
kf5-kwayland-5.48.0-2.fc28.1
kf5-kxmlgui-5.48.0-3.fc28
kwin-5.13.4-2.fc28
libcacard-2.6.1-1.fc28
libfm-qt-0.11.2-12.fc28
libqtxdg-2.0.0-13.fc28
libs3-4.1-0.1.20180821gita4d873f.fc28
lxqt-qtplugin-0.11.1-12.fc28
mscore-2.2.1-4.fc28
nim-0.18.0-2.fc28
openssh-7.8p1-2.fc28
perl-Net-DNS-SEC-1.10-1.fc28
plasma-integration-5.13.4-2.fc28
pyotherside-1.5.3-13.fc28
python-click-man-0.2.2-4.fc28
python-llfuse-1.3.5-1.fc28
python-mmdzanata-0.7-2.fc28
python-qt5-5.10.1-4.fc28
pythonqt-3.2-9.fc28
qemu-2.11.2-3.fc28
qgnomeplatform-0.4-2.fc28
qstardict-1.3-4.fc28
qt-creator-4.6.2-2.fc28
qt5-5.11.1-3.fc28
qt5-qt3d-5.11.1-2.fc28
qt5-qtbase-5.11.1-7.fc28
qt5-qtcanvas3d-5.11.1-2.fc28
qt5-qtcharts-5.11.1-4.fc28
qt5-qtconnectivity-5.11.1-2.fc28
qt5-qtdatavis3d-5.11.1-1.fc28
qt5-qtdeclarative-5.11.1-3.fc28
qt5-qtdoc-5.11.1-2.fc28
qt5-qtenginio-1.6.2-16.fc28
qt5-qtgamepad-5.11.1-3.fc28
qt5-qtgraphicaleffects-5.11.1-2.fc28
qt5-qtimageformats-5.11.1-2.fc28
qt5-qtlocation-5.11.1-3.fc28
qt5-qtmultimedia-5.11.1-2.fc28
qt5-qtquickcontrols-5.11.1-2.fc28
qt5-qtquickcontrols2-5.11.1-2.fc28
qt5-qtremoteobjects-5.11.1-3.fc28
qt5-qtscript-5.11.1-2.fc28
qt5-qtscxml-5.11.1-3.fc28
qt5-qtsensors-5.11.1-2.fc28
qt5-qtserialbus-5.11.1-3.fc28
qt5-qtserialport-5.11.1-2.fc28
qt5-qtspeech-5.11.1-2.fc28
qt5-qtstyleplugins-5.0.0-27.fc28
qt5-qtsvg-5.11.1-2.fc28
qt5-qttools-5.11.1-2.fc28
qt5-qttranslations-5.11.1-2.fc28
qt5-qtvirtualkeyboard-5.11.1-2.fc28
qt5-qtwayland-5.11.1-2.fc28
qt5-qtwebchannel-5.11.1-2.fc28
qt5-qtwebengine-5.11.1-4.fc28
qt5-qtwebkit-5.212.0-0.27.alpha2.fc28
qt5-qtwebsockets-5.11.1-2.fc28
qt5-qtwebview-5.11.1-3.fc28
qt5-qtx11extras-5.11.1-2.fc28
qt5-qtxmlpatterns-5.11.1-3.fc28
qt5ct-0.35-2.fc28
redhat-rpm-config-109-1.fc28
runc-1.0.0-51.dev.gitfdd8055.fc28
skrooge-2.14.0-1.fc28
texmaker-5.0.2-6.fc28
ugene-1.31.0-3.fc28
virtualbox-guest-additions-5.2.18-1.fc28
xdg-desktop-portal-kde-5.13.4-3.fc28
yarock-1.3.1-2.fc28
yum-utils-1.1.31-515.fc28
Details about builds:
================================================================================
R-littler-0.3.4-1.fc28 (FEDORA-2018-df3c5265ed)
littler: R at the Command-Line via 'r'
--------------------------------------------------------------------------------
Update Information:
littler 0.3.4 (mainly updates to examples).
--------------------------------------------------------------------------------
ChangeLog:
* Fri Aug 31 2018 Mattias Ellert <mattias.ellert(a)physics.uu.se> - 0.3.4-1
- New upstream release 0.3.4
* Thu Jul 12 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 0.3.3-6
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Tue Jul 10 2018 Pete Walter <pwalter(a)fedoraproject.org> - 0.3.3-5
- Rebuild for ICU 62
* Fri May 18 2018 Tom Callaway <spot(a)fedoraproject.org> - 0.3.3-4.1
- actually rebuild against R 3.5.0
--------------------------------------------------------------------------------
================================================================================
analitza-18.04.3-2.fc28 (FEDORA-2018-bea1e0b465)
Library of mathematical features
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Wed Aug 22 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 18.04.3-2
- rebuild
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
appmenu-qt5-0.3.0+16.10.20160628.1-10.fc28 (FEDORA-2018-bea1e0b465)
Support for global DBus-exported application menu in Qt5
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Thu Jul 12 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 0.3.0+16.10.20160628.1-10
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
buku-3.9-1.fc28 (FEDORA-2018-e25e3fe809)
Powerful command-line bookmark manager
--------------------------------------------------------------------------------
Update Information:
Release 3.9
--------------------------------------------------------------------------------
ChangeLog:
* Thu Aug 30 2018 Robert-Andr�� Mauchin <zebob.m(a)gmail.com> - 3.9-1
- Release 3.9
--------------------------------------------------------------------------------
================================================================================
calibre-3.29.0-1.fc28 (FEDORA-2018-bea1e0b465)
E-book converter and library manager
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Tue Aug 14 2018 Kevin Fenzi <kevin(a)scrye.com> - 3.29.0-1
- Update to 3.29.0. Fixes bug #1614778
* Tue Jul 31 2018 Florian Weimer <fweimer(a)redhat.com> - 3.28.0-3
- Rebuild with fixed binutils
* Fri Jul 27 2018 Igor Gnatenko <ignatenkobrain(a)fedoraproject.org> - 3.28.0-2
- Rebuild for new binutils
* Thu Jul 26 2018 Kevin Fenzi <kevin(a)scrye.com> - 3.28.0-1
- Update to 3.28.0. Fixes bug #1605186
* Thu Jul 26 2018 Zbigniew J��drzejewski-Szmek <zbyszek(a)in.waw.pl> - 3.27.1-5
- Use versioned python macros
- Do explicit byte compilation to conform to new guidelines
* Thu Jul 12 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 3.27.1-4
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Wed Jul 11 2018 Sandro Mani <manisandro(a)gmail.com> - 3.27.1-3
- Rebuild (podofo)
* Tue Jul 10 2018 Pete Walter <pwalter(a)fedoraproject.org> - 3.27.1-2
- Rebuild for ICU 62
* Sat Jul 7 2018 Zbigniew J��drzejewski-Szmek <zbyszek(a)in.waw.pl> - 3.27.1-1
- Update to 3.27.1. Fixes bug #1598761
* Thu Jun 21 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 3.26.1-2
- rebuild (qt5)
* Fri Jun 15 2018 Kevin Fenzi <kevin(a)scrye.com> - 3.26.1-1
- Update to 3.26.1. Fixes bug #1591735
* Sun Jun 3 2018 Kevin Fenzi <kevin(a)scrye.com> - 3.25.0-1
- Update to 3.25.0. Fixes bug #1585171
* Wed May 30 2018 Kevin Fenzi <kevin(a)scrye.com> - 3.24.2-1
- Update to 3.24.2.
* Tue May 29 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 3.23.0-2
- rebuild (qt5)
* Fri May 4 2018 Kevin Fenzi <kevin(a)scrye.com> - 3.23.0-1
- Update to 3.23.0. Fixes bug #1574953
* Mon Apr 30 2018 Pete Walter <pwalter(a)fedoraproject.org> - 3.22.1-2
- Rebuild for ICU 61.1
* Fri Apr 20 2018 Kevin Fenzi <kevin(a)scrye.com> - 3.22.1-1
- Update to 3.22.1. Fixes bug #1569983
* Sat Apr 7 2018 Kevin Fenzi <kevin(a)scrye.com> - 3.21.0-1
- Update to 3.21.0. Fixes bug #1564477
* Fri Mar 23 2018 Kevin Fenzi <kevin(a)scrye.com> - 3.20.0-1
- Update to 3.20.0. Fixes bug #1559848
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
castxml-0.1-0.25.20180806gitae93121.fc28 (FEDORA-2018-d4f96211d8)
C-family abstract syntax tree XML output tool
--------------------------------------------------------------------------------
Update Information:
New git snapshot.
--------------------------------------------------------------------------------
ChangeLog:
* Thu Aug 30 2018 Mattias Ellert <mattias.ellert(a)physics.uu.se> - 0.1-0.25.20180806gitae93121
- New git snapshot (supports LLVM7)
* Thu Jul 12 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 0.1-0.24.20180122git6952441
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
--------------------------------------------------------------------------------
================================================================================
cups-2.2.6-19.fc28 (FEDORA-2018-d4c7b08a84)
CUPS printing system
--------------------------------------------------------------------------------
Update Information:
remove previous patch for now, it issues several connection problems - #1621949,
#1620114 and #1619240
--------------------------------------------------------------------------------
ChangeLog:
* Fri Aug 31 2018 Zdenek Dohnal <zdohnal(a)redhat.com> - 1:2.2.6-19
- remove previous patch for now, it issues several connection problems - #1621949, #1620114 and #1619240
--------------------------------------------------------------------------------
================================================================================
deepin-qt5integration-0.2.8.3-5.fc28 (FEDORA-2018-bea1e0b465)
Qt platform theme integration plugins for DDE
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Sun May 27 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 0.2.8.3-5
- rebuild (qt5)
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
deepin-tool-kit-0.3.3-8.fc28 (FEDORA-2018-bea1e0b465)
Base development tool of all C++/Qt Developer work on Deepin
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Sun May 27 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 0.3.3-8
- rebuild (qt5), use %ldconfig_scriptlets
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
dmlite-1.10.4-2.fc28 (FEDORA-2018-3394d8f71d)
Lcgdm grid data management and storage framework
--------------------------------------------------------------------------------
Update Information:
Bugfixes and improvements, in particular to service stability and space
management. ---- Bugfixes and improvements, in particular to service stability
and space management. ---- Fix for domeadapter configuration.
--------------------------------------------------------------------------------
ChangeLog:
* Thu Aug 30 2018 Oliver Keeble <oliver.keeble(a)cern.ch> - 1.10.4-2
- Update dmlite-shell deps
* Mon Aug 27 2018 Oliver Keeble <oliver.keeble(a)cern.ch> - 1.10.4-1
- New upstream release 1.10.4
* Thu Jul 12 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 1.10.3-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Thu Jun 7 2018 Oliver Keeble <oliver.keeble(a)cern.ch> - 1.10.3-1
- New upstream release
* Thu Apr 19 2018 Andrea Manzi <amanzi(a)cern.ch> - 1.10.2-1
- new upstream release
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1603802 - dmlite: FTBFS in Fedora rawhide
https://bugzilla.redhat.com/show_bug.cgi?id=1603802
--------------------------------------------------------------------------------
================================================================================
dnscrypt-proxy-gui-1.11.15-2.fc28 (FEDORA-2018-bea1e0b465)
GUI wrapper for dnscrypt-proxy
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Sun May 27 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 1.11.15-2
- rebuild (qt5)
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
dtkwidget-2.0.6.1-1.fc28.2 (FEDORA-2018-bea1e0b465)
Deepin tool kit widget modules
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Wed Aug 22 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 2.0.6.1-1.2
- BR: qt5-qtbase-private-devel
* Sun Jul 15 2018 Zamir SUN <zsun(a)fedoraproject.org> - 2.0.6.1-1.fc28.1
- Bump version to build for Fedora 28
* Tue Feb 20 2018 mosquito <sensor.wen(a)gmail.com> - 2.0.6.1-1
- Update to 2.0.6.1
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
fbreader-0.99.4-2.fc28 (FEDORA-2018-25fd437042)
E-book reader
--------------------------------------------------------------------------------
Update Information:
Updates to latest fbreader; simplify packaging now that only one GUI toolkit is
supported
--------------------------------------------------------------------------------
ChangeLog:
* Thu Aug 30 2018 Michel Alexandre Salim <salimma(a)fedoraproject.org> - 0.99.4-2
- Exclude building on armv7hl (bz #1624218)
* Wed Aug 29 2018 Michel Alexandre Salim <salimma(a)fedoraproject.org> - 0.99.4-1
- Update to 0.99.4
- Obsolete zlibrary-ui-{gtk,qt} - only Qt4 is supported now
* Fri Jul 13 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 0.12.10-24
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Wed Feb 7 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 0.12.10-23
- Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild
* Wed Aug 2 2017 Fedora Release Engineering <releng(a)fedoraproject.org> - 0.12.10-22
- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Binutils_Mass_Rebuild
* Wed Jul 26 2017 Fedora Release Engineering <releng(a)fedoraproject.org> - 0.12.10-21
- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Mass_Rebuild
* Fri Feb 10 2017 Fedora Release Engineering <releng(a)fedoraproject.org> - 0.12.10-20
- Rebuilt for https://fedoraproject.org/wiki/Fedora_26_Mass_Rebuild
* Wed Feb 3 2016 Fedora Release Engineering <releng(a)fedoraproject.org> - 0.12.10-19
- Rebuilt for https://fedoraproject.org/wiki/Fedora_24_Mass_Rebuild
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1603949 - fbreader: FTBFS in Fedora rawhide
https://bugzilla.redhat.com/show_bug.cgi?id=1603949
--------------------------------------------------------------------------------
================================================================================
fcitx-qt5-1.2.3-2.fc28 (FEDORA-2018-bea1e0b465)
Fcitx IM module for Qt5
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Thu Jun 21 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 1.2.3-2
- rebuild (qt5)
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
gammaray-2.9.0-4.fc28 (FEDORA-2018-bea1e0b465)
A tool for examining internals of Qt applications
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Thu Aug 23 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 2.9.0-4
- drop mkspecs hack causing FTBFS
* Fri Jul 13 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 2.9.0-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Thu Jun 21 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 2.9.0-2
- rebuild (qt5)
* Sat Jun 2 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 2.9.0-1
- gammayray-2.9.0
- make qt4 support optional (off for now)
* Sun May 27 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 2.8.1-9
- rebuild (qt5)
* Thu Mar 15 2018 Iryna Shcherbina <ishcherb(a)redhat.com> - 2.8.1-8
- Update Python 2 dependency declarations to new packaging standards
(See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3)
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
gsettings-qt-0-0.11.20170715bzr83.fc28.2 (FEDORA-2018-bea1e0b465)
Qt/QML bindings for GSettings
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Wed Aug 29 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 0-0.11.20170715bzr.2
- rebuild (qt5)
* Fri Aug 24 2018 Zamir SUN <zsun(a)fedoraproject.org> - 0-0.11.20170715bzr83.1
- Fix test omission
* Sun May 27 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 0-0.11.20170715bzr
- rebuild (qt5)
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
iniparser-4.0-7.20160821git.fc28 (FEDORA-2018-9e60953b74)
C library for parsing "INI-style" files
--------------------------------------------------------------------------------
Update Information:
Security fix for BZ#1545825
--------------------------------------------------------------------------------
ChangeLog:
* Fri Aug 31 2018 Robin Lee <cheeselee(a)fedoraproject.org> - 4.0-7.20160821git
- Backport fix for BZ#1545825
* Fri Jul 13 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 4.0-6.20160821git
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1545824 - iniparser: stack-buffer-underflow in iniparser_load in iniparser.c
https://bugzilla.redhat.com/show_bug.cgi?id=1545824
--------------------------------------------------------------------------------
================================================================================
iproute-4.17.0-3.fc28 (FEDORA-2018-b5ca07f212)
Advanced IP routing and network device configuration tools
--------------------------------------------------------------------------------
Update Information:
iprule: Fix destination prefix output
--------------------------------------------------------------------------------
ChangeLog:
* Fri Aug 31 2018 Phil Sutter <psutter(a)redhat.com> - 4.17.0-3
- iprule: Fix destination prefix output
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1623488 - ip-rule report output is adding a space between the network address and the netmast
https://bugzilla.redhat.com/show_bug.cgi?id=1623488
--------------------------------------------------------------------------------
================================================================================
js-jsroot-5.5.1-1.fc28 (FEDORA-2018-898db30f26)
JavaScript ROOT - Interactive numerical data analysis graphics
--------------------------------------------------------------------------------
Update Information:
https://github.com/root-project/jsroot/blob/5.5.1/changes.md
--------------------------------------------------------------------------------
ChangeLog:
* Thu Aug 30 2018 Mattias Ellert <mattias.ellert(a)physics.uu.se> - 5.5.1-1
- Update to version 5.5.1
--------------------------------------------------------------------------------
================================================================================
keepassxc-2.3.4-1.fc28 (FEDORA-2018-fb74aa3f33)
Cross-platform password manager
--------------------------------------------------------------------------------
Update Information:
2.3.4 release
--------------------------------------------------------------------------------
ChangeLog:
* Wed Aug 29 2018 Mukundan Ragavan <nonamedotc(a)fedoraproject.org> - 2.3.4-1
- Update to 2.3.4
* Thu Jul 19 2018 Mukundan Ragavan <nonamedotc(a)fedoraproject.org> - 2.3.3-3
- Fix FTBFS
* Fri Jul 13 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 2.3.3-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1623294 - KeePassXC 2.3.4 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1623294
--------------------------------------------------------------------------------
================================================================================
kf5-akonadi-server-18.04.3-2.fc28 (FEDORA-2018-bea1e0b465)
PIM Storage Service
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Wed Aug 22 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 18.04.3-2
- rebuild (qt5)
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
kf5-frameworkintegration-5.48.0-2.fc28 (FEDORA-2018-bea1e0b465)
KDE Frameworks 5 Tier 4 workspace and cross-framework integration plugins
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Wed Aug 22 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.48.0-2
- branch rebuild (qt5)
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
kf5-kdeclarative-5.48.0-2.fc28 (FEDORA-2018-bea1e0b465)
KDE Frameworks 5 Tier 3 addon for Qt declarative
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Wed Aug 22 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.48.0-2
- branch rebuild (qt5)
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
kf5-kwayland-5.48.0-2.fc28.1 (FEDORA-2018-bea1e0b465)
KDE Frameworks 5 library that wraps Client and Server Wayland libraries
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Wed Aug 22 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.48.0-3
- branch rebuild (qt5)
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
kf5-kxmlgui-5.48.0-3.fc28 (FEDORA-2018-bea1e0b465)
KDE Frameworks 5 Tier 3 solution for user-configurable main windows
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Wed Aug 22 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.48.0-3
- branch rebuild (qt5)
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
kwin-5.13.4-2.fc28 (FEDORA-2018-bea1e0b465)
KDE Window manager
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Fri Aug 24 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.13.4-2
- rebuild
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
libcacard-2.6.1-1.fc28 (FEDORA-2018-7a68d5117f)
CAC (Common Access Card) library
--------------------------------------------------------------------------------
Update Information:
Update to new upstream release
--------------------------------------------------------------------------------
ChangeLog:
* Fri Aug 31 2018 Christophe Fergeau <cfergeau(a)redhat.com> - 2.6.1-1
- Update to new upstream release
--------------------------------------------------------------------------------
================================================================================
libfm-qt-0.11.2-12.fc28 (FEDORA-2018-bea1e0b465)
Companion library for PCManFM
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Sun May 27 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 0.11.2-12
- rebuild (qt5)
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
libqtxdg-2.0.0-13.fc28 (FEDORA-2018-bea1e0b465)
QtXdg, a Qt5 implementation of XDG standards
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Sun May 27 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 2.0.0-13
- rebuild (qt5)
* Wed Mar 7 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 2.0.0-12
- .spec cleanup, BR: gcc-c++, use %license %make_build
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
libs3-4.1-0.1.20180821gita4d873f.fc28 (FEDORA-2018-a26da7e1a4)
C Library and Tools for Amazon S3 Access
--------------------------------------------------------------------------------
Update Information:
libs3 4.1.
--------------------------------------------------------------------------------
ChangeLog:
* Fri Aug 31 2018 Mattias Ellert <mattias.ellert(a)physics.uu.se> - 4.1-0.1.20180821gita4d873f
- New github snapshot
* Mon Jul 16 2018 Mattias Ellert <mattias.ellert(a)physics.uu.se> - 4.0-0.6.20170206git208bcba
- Add BuildRequires on gcc
- Packaging updates
- Remove Group and BuildRoot tags
- Don't clear the buildroot in the install section
- Remove the clean section
- Install license in licensedir
- Use new ldconfig scriptlets macro
* Fri Jul 13 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 4.0-0.5.20170206git208bcba
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
--------------------------------------------------------------------------------
================================================================================
lxqt-qtplugin-0.11.1-12.fc28 (FEDORA-2018-bea1e0b465)
Qt plugin framework for LXQt Desktop Suite
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Sun May 27 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 0.11.1-12
- rebuild (qt5)
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
mscore-2.2.1-4.fc28 (FEDORA-2018-bea1e0b465)
Music Composition & Notation Software
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Thu Jun 21 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 2.2.1-4
- rebuild (qt5)
* Thu May 31 2018 Orcan Ogetbil <oget[DOT]fedora[AT]gmail[DOT]com> - 2.2.1-3
- Fix missing include for qt >= 5.11 (RHBZ#1584834)
* Sun May 27 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 2.2.1-2
- rebuild (qt5)
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
nim-0.18.0-2.fc28 (FEDORA-2018-f671aa7adb)
Statically typed, imperative programming language
--------------------------------------------------------------------------------
Update Information:
Removed nodejs-devel build requirement
--------------------------------------------------------------------------------
ChangeLog:
* Fri Aug 31 2018 Sergey Avseyev <sergey.avseyev(a)gmail.com> - 0.18.0-2
- Do not run JS tests to avoid nodejs dependency
--------------------------------------------------------------------------------
================================================================================
openssh-7.8p1-2.fc28 (FEDORA-2018-9effcf1f69)
An open source implementation of SSH protocol version 2
--------------------------------------------------------------------------------
Update Information:
This release is fixing various GSSAPI issues and cleans up missing bits after
rebase.
--------------------------------------------------------------------------------
ChangeLog:
* Fri Aug 31 2018 Jakub Jelen <jjelen(a)redhat.com> - 7.8p1-2 + 0.10.3-5
- New upstream release fixing CVE 2018-15473
- Remove unused patches
- Remove reference to unused enviornment variable SSH_USE_STRONG_RNG
- Address coverity issues
- Unbreak scp between two IPv6 hosts
- Unbreak GSSAPI key exchange (#1624344)
- Unbreak rekeying with GSSAPI key exchange (#1624344)
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1624344 - Rekeying on long sessions fails when using gss
https://bugzilla.redhat.com/show_bug.cgi?id=1624344
[ 2 ] Bug #1624323 - gsskex authentication causes segmentation fault
https://bugzilla.redhat.com/show_bug.cgi?id=1624323
--------------------------------------------------------------------------------
================================================================================
perl-Net-DNS-SEC-1.10-1.fc28 (FEDORA-2018-07b3e5119a)
DNSSEC modules for Perl
--------------------------------------------------------------------------------
Update Information:
Update to 1.10
--------------------------------------------------------------------------------
ChangeLog:
* Fri Aug 31 2018 Paul Wouters <pwouters(a)redhat.com> - 1.10-1
- Update to 1.10
* Fri Jul 13 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 1.09-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Fri Jun 29 2018 Jitka Plesnikova <jplesnik(a)redhat.com> - 1.09-2
- Perl 5.28 rebuild
* Thu Jun 21 2018 Jitka Plesnikova <jplesnik(a)redhat.com> - 1.09-1
- 1.09 bump
* Wed May 30 2018 Jitka Plesnikova <jplesnik(a)redhat.com> - 1.08-1
- 1.08 bump
* Tue Mar 20 2018 Wes Hardaker <wjhns174(a)hardakers.net> - 1.05-1
- 1.05 bump
--------------------------------------------------------------------------------
================================================================================
plasma-integration-5.13.4-2.fc28 (FEDORA-2018-bea1e0b465)
Qt Platform Theme integration plugin for Plasma
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Wed Aug 22 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.13.4-2
- rebuild
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
pyotherside-1.5.3-13.fc28 (FEDORA-2018-bea1e0b465)
Asynchronous Python 3 Bindings for Qt 5
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Wed Aug 22 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 1.5.3-13
- better exclude fix
* Tue Jul 17 2018 Martin Kolman <mkolman(a)redhat.com> - 1.5.3-12
- fix exclude for qtquicktests
* Fri Jul 13 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 1.5.3-11
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Mon Jul 2 2018 Miro Hron��ok <mhroncok(a)redhat.com> - 1.5.3-10
- Rebuilt for Python 3.7
* Thu Jun 21 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 1.5.3-9
- rebuild (qt5)
* Tue Jun 19 2018 Miro Hron��ok <mhroncok(a)redhat.com> - 1.5.3-8
- Rebuilt for Python 3.7
* Sun May 27 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 1.5.3-7
- rebuild (qt)
- use %make_build %license
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
python-click-man-0.2.2-4.fc28 (FEDORA-2018-84d7123d28)
Generate man pages for click based CLI applications
--------------------------------------------------------------------------------
Update Information:
Add python-mmdzanata package to Fedora and EPEL 7 Provides tools for
interacting with module translations in Zanata.
--------------------------------------------------------------------------------
================================================================================
python-llfuse-1.3.5-1.fc28 (FEDORA-2018-6d5d84bb94)
Python Bindings for the low-level FUSE API
--------------------------------------------------------------------------------
Update Information:
Release 1.3.5 (2018-08-30) --- - Add `handle_signals` option to llfuse.main -
Several fixes to examples/passthroughfs.py - Now compatible with Python 3.7
--------------------------------------------------------------------------------
ChangeLog:
* Thu Aug 30 2018 Denis Fateyev <denis(a)fateyev.com> - 1.3.5-1
- Update to 1.3.5 release
* Sat Jul 14 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 1.3.3-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Tue Jun 19 2018 Miro Hron��ok <mhroncok(a)redhat.com> - 1.3.3-2
- Rebuilt for Python 3.7
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1605754 - python-llfuse: FTBFS in Fedora rawhide
https://bugzilla.redhat.com/show_bug.cgi?id=1605754
[ 2 ] Bug #1574032 - python-llfuse-1.3.4 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1574032
--------------------------------------------------------------------------------
================================================================================
python-mmdzanata-0.7-2.fc28 (FEDORA-2018-84d7123d28)
Tools for working with translations of modulemd
--------------------------------------------------------------------------------
Update Information:
Add python-mmdzanata package to Fedora and EPEL 7 Provides tools for
interacting with module translations in Zanata.
--------------------------------------------------------------------------------
================================================================================
python-qt5-5.10.1-4.fc28 (FEDORA-2018-bea1e0b465)
PyQt5 is Python bindings for Qt5
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Thu Aug 30 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.10.1-4
- update/fix Timeline.patch
- borrow qt_quick_crash_fix.patch from opensuse
* Wed Aug 22 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.10.1-3
- branch rebuild (qt5)
- qt511.patch
* Tue Mar 20 2018 Zbigniew J��drzejewski-Szmek <zbyszek(a)in.waw.pl> - 5.10.1-2
- Add missing %python_provide macros
- Rename python2 packages to python2-*
* Tue Mar 6 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.10.1-1
- 5.10.1, use %make_build
* Sat Mar 3 2018 S��rgio Basto <sergio(a)serjux.com> - 5.10-4
- Enable python3 on epel7
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
pythonqt-3.2-9.fc28 (FEDORA-2018-bea1e0b465)
Lightweight script binding of the Qt framework to the Python language
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Mon May 28 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 3.2-9
- rebuild (qt5)
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
qemu-2.11.2-3.fc28 (FEDORA-2018-5cf65abded)
QEMU is a FAST! processor emulator
--------------------------------------------------------------------------------
Update Information:
* Fix 64B usb smartcard packages (bz #1620590) * Fix ppc64 + tcg startup
regression with cap-htm
--------------------------------------------------------------------------------
ChangeLog:
* Thu Aug 30 2018 Cole Robinson <crobinso(a)redhat.com> - 2:2.11.2-3
- Fix 64B usb smartcard packages (bz #1620590)
- Fix ppc64 + tcg startup regression with cap-htm
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1620590 - Backport 'Handle 64 B USB packets' to f28
https://bugzilla.redhat.com/show_bug.cgi?id=1620590
[ 2 ] Bug #1614948 - qemu-system-ppc64: No Transactional Memory support in TCG, try cap-htm=off
https://bugzilla.redhat.com/show_bug.cgi?id=1614948
--------------------------------------------------------------------------------
================================================================================
qgnomeplatform-0.4-2.fc28 (FEDORA-2018-bea1e0b465)
Qt Platform Theme aimed to accommodate Gnome settings
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Fri Aug 24 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 0.4-2
- rebuild
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
qstardict-1.3-4.fc28 (FEDORA-2018-bea1e0b465)
StarDict clone written using Qt
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Sun May 27 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 1.3-4
- rebuild (qt5)
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
qt-creator-4.6.2-2.fc28 (FEDORA-2018-bea1e0b465)
Cross-platform IDE for Qt
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Fri Aug 24 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 4.6.2-2
- branch rebuild (qt5)
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
qt5-5.11.1-3.fc28 (FEDORA-2018-bea1e0b465)
Qt5 meta package
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Sat Jul 14 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 5.11.1-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Fri Jun 29 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.1-2
- %_qt5_prefix=%_prefix (was %_libdir/qt5}
* Tue Jun 19 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.1-1
- 5.11.1
* Sat Jun 2 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.0-2
- rpm-macros: do not define _qt5_archdatadir, _qt5_bindir in terms of _qt5_prefix anymore
* Sat May 26 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.0-1
- 5.11.0
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
qt5-qt3d-5.11.1-2.fc28 (FEDORA-2018-bea1e0b465)
Qt5 - Qt3D QML bindings and C++ APIs
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Sat Jul 14 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 5.11.1-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Tue Jun 19 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.1-1
- 5.11.1
* Sun May 27 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.0-1
- 5.11.0
- use %make_build %ldconfig_scriptlets
* Thu Mar 8 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.10.1-2
- BR: qt5-rpm-macros
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
qt5-qtbase-5.11.1-7.fc28 (FEDORA-2018-bea1e0b465)
Qt5 - QtBase components
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Thu Jul 26 2018 Than Ngo <than(a)redhat.com> - 5.11.1-7
- fixed FTBFS
* Sat Jul 14 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 5.11.1-6
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Tue Jul 10 2018 Pete Walter <pwalter(a)fedoraproject.org> - 5.11.1-5
- Rebuild for ICU 62
* Mon Jul 2 2018 Than Ngo <than(a)redhat.com> - 5.11.1-4
- fixed bz#1597110 - BRP mangle shebangs and calculation of provides should ignore backups files
* Fri Jun 29 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.1-3
- apply sse2-related multilib hack on < f29 only
- safer %_qt5_prefix, %qt5_archdatadir ownership
- rebuild for %_qt5_prefix = %_prefix
* Sat Jun 23 2018 Than Ngo <than(a)redhat.com> - 5.11.1-2
- fixed #1592146, python3
* Tue Jun 19 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.1-1
- 5.11.1
- relax qt5-rpm-macros dep
- drop workaround for QTBUG-37417
- drop CMake-Restore-qt5_use_modules-function.patch (upstreamed)
* Mon Jun 18 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.0-3
- backport CMake-Restore-qt5_use_modules-function.patch
- %build: %ix86 --no-sse2 on < f29 only
* Wed May 30 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.0-2
- move libQt5EglFSDeviceIntegration to -gui (#1557223)
* Tue May 22 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.0-1
- 5.11.0
- drop support for inject_optflags (not used since f23)
* Mon Apr 30 2018 Pete Walter <pwalter(a)fedoraproject.org> - 5.10.1-8
- Rebuild for ICU 61.1
* Thu Mar 8 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.10.1-7
- enforce qt5-rpm-macros versioning
- BR: gcc-c++
- Qt5.pc: fix version, add %check
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
qt5-qtcanvas3d-5.11.1-2.fc28 (FEDORA-2018-bea1e0b465)
Qt5 - Canvas3d component
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Sat Jul 14 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 5.11.1-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Tue Jun 19 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.1-1
- 5.11.1
* Sun May 27 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.0-1
- 5.11.0
* Thu Mar 8 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.10.1-2
- BR: qt5-rpm-macros
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
qt5-qtcharts-5.11.1-4.fc28 (FEDORA-2018-bea1e0b465)
Qt5 - Charts component
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Sun Jul 15 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.1-4
- use %{_qt5_archdatadir}/mkspecs
* Sat Jul 14 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 5.11.1-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Tue Jun 19 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.1-1
- 5.11.1
* Sun May 27 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.0-1
- 5.11.0
- use %make_build %ldconfig_scriptlets
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
qt5-qtconnectivity-5.11.1-2.fc28 (FEDORA-2018-bea1e0b465)
Qt5 - Connectivity components
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Sat Jul 14 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 5.11.1-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Tue Jun 19 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.1-1
- 5.11.1
* Sun May 27 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.0-1
- 5.11.0
- use %make_build %ldconfig_scriptlets
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
qt5-qtdatavis3d-5.11.1-1.fc28 (FEDORA-2018-bea1e0b465)
Qt5 - Qt Data Visualization component
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Sun Jul 15 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.1-1
- 5.11.1
- use %make_build %ldconfig_scriptlets
- use %{_qt5_archdatadir}/mkspecs
* Sat Jul 14 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 5.10.0-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
qt5-qtdeclarative-5.11.1-3.fc28 (FEDORA-2018-bea1e0b465)
Qt5 - QtDeclarative component
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Sun Jul 15 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.1-3
- BR: /usr/bin/python
* Sat Jul 14 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 5.11.1-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
qt5-qtdoc-5.11.1-2.fc28 (FEDORA-2018-bea1e0b465)
Main Qt5 Reference Documentation
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Sat Jul 14 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 5.11.1-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Tue Jun 19 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.1-1
- 5.11.1
* Sun May 27 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.0-1
- 5.11.0
- use %make_build
- use unversioned BR: qt5-qtbase-devel
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
qt5-qtenginio-1.6.2-16.fc28 (FEDORA-2018-bea1e0b465)
Qt5 - Enginio component
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Tue May 29 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 1.6.2-16
- rebuild (qt5)
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
qt5-qtgamepad-5.11.1-3.fc28 (FEDORA-2018-bea1e0b465)
Qt5 - Gamepad component
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Sun Jul 15 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.1-3
- use %{_qt5_archdatadir}/mkspecs
* Sat Jul 14 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 5.11.1-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Tue Jun 19 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.1-1
- 5.11.1
* Sun May 27 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.0-1
- 5.11.0
- use %make_build %ldconfig_scriptlets
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
qt5-qtgraphicaleffects-5.11.1-2.fc28 (FEDORA-2018-bea1e0b465)
Qt5 - QtGraphicalEffects component
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Sat Jul 14 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 5.11.1-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Tue Jun 19 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.1-1
- 5.11.1
* Sun May 27 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.0-1
- 5.11.0
- use %make_build
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
qt5-qtimageformats-5.11.1-2.fc28 (FEDORA-2018-bea1e0b465)
Qt5 - QtImageFormats component
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Sat Jul 14 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 5.11.1-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Tue Jun 19 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.1-1
- 5.11.1
* Sun May 27 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.0-1
- 5.11.0
- use %make_build
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
qt5-qtlocation-5.11.1-3.fc28 (FEDORA-2018-bea1e0b465)
Qt5 - Location component
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Sat Jul 14 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 5.11.1-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Tue Jul 10 2018 Pete Walter <pwalter(a)fedoraproject.org> - 5.11.1-2
- Rebuild for ICU 62
* Tue Jun 19 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.1-1
- 5.11.1
* Sun May 27 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.0-1
- 5.11.0
- drop old G_INIT_VALUE patch (el6 too old anyway)
* Mon Apr 30 2018 Pete Walter <pwalter(a)fedoraproject.org> - 5.10.1-4
- Rebuild for ICU 61.1
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
qt5-qtmultimedia-5.11.1-2.fc28 (FEDORA-2018-bea1e0b465)
Qt5 - Multimedia support
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Sat Jul 14 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 5.11.1-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Tue Jun 19 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.1-1
- 5.11.1
* Sun May 27 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.0-1
- 5.11.0
- use %make_build %ldconfig_scriptlets
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
qt5-qtquickcontrols-5.11.1-2.fc28 (FEDORA-2018-bea1e0b465)
Qt5 - module with set of QtQuick controls
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Sat Jul 14 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 5.11.1-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Tue Jun 19 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.1-1
- 5.11.1
* Sun May 27 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.0-1
- 5.11.0
- use %license %make_build
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
qt5-qtquickcontrols2-5.11.1-2.fc28 (FEDORA-2018-bea1e0b465)
Qt5 - module with set of QtQuick controls for embedded
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Sat Jul 14 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 5.11.1-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Tue Jun 19 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.1-1
- 5.11.1
* Sun May 27 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.0-1
- 5.11.0
- use %make_build %ldconfig_scriptlets
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
qt5-qtremoteobjects-5.11.1-3.fc28 (FEDORA-2018-bea1e0b465)
Qt5 - Qt Remote Objects
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Sun Jul 15 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.1-3
- use %{_qt5_archdatadir}/mkspecs
* Sat Jul 14 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 5.11.1-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Tue Jun 19 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.1-1
- 5.11.1
* Sun May 27 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.0-1
- 5.11.0
- use %ldconfig_scriptlets %license %make_build
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
qt5-qtscript-5.11.1-2.fc28 (FEDORA-2018-bea1e0b465)
Qt5 - QtScript component
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Sat Jul 14 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 5.11.1-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Tue Jun 19 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.1-1
- 5.11.1
* Sat May 26 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.0-1
- 5.11.0
* Wed May 9 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.10.1-4
- %check: use 'timeout 180' to avoid hanging tests
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
qt5-qtscxml-5.11.1-3.fc28 (FEDORA-2018-bea1e0b465)
Qt5 - ScXml component
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Sun Jul 15 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.1-3
- use %{_qt5_archdatadir}/mkspecs
* Sat Jul 14 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 5.11.1-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Tue Jun 19 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.1-1
- 5.11.1
* Sun May 27 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.0-1
- 5.11.0
- use %make_build %ldconfig_scriptlets
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
qt5-qtsensors-5.11.1-2.fc28 (FEDORA-2018-bea1e0b465)
Qt5 - Sensors component
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Sat Jul 14 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 5.11.1-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Tue Jun 19 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.1-1
- 5.11.1
* Sun May 27 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.0-1
- 5.11.0
- use %make_build %ldconfig_scriptlets
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
qt5-qtserialbus-5.11.1-3.fc28 (FEDORA-2018-bea1e0b465)
Qt5 - SerialPort component
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Sun Jul 15 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.1-3
- use %{_qt5_archdatadir}/mkspecs/
* Sat Jul 14 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 5.11.1-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Tue Jun 19 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.1-1
- 5.11.1
* Sun May 27 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.0-1
- 5.11.0
- use %make_build %ldconfig_scriptlets
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
qt5-qtserialport-5.11.1-2.fc28 (FEDORA-2018-bea1e0b465)
Qt5 - SerialPort component
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Sat Jul 14 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 5.11.1-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Tue Jun 19 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.1-1
- 5.11.1
* Sun May 27 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.0-1
- 5.11.0, use %make_build %ldconfig_scriptlets
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
qt5-qtspeech-5.11.1-2.fc28 (FEDORA-2018-bea1e0b465)
Qt5 - Speech component
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Sat Jul 14 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 5.11.1-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Wed Jun 20 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.1-1
- 5.11.1
* Sun May 27 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.0-1
- 5.11.0
- use %make_build %ldconfig_scriptlets
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
qt5-qtstyleplugins-5.0.0-27.fc28 (FEDORA-2018-bea1e0b465)
Classic Qt widget styles
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Sun May 13 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.0.0-27
- use %make_build %make_install
* Sun May 13 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.0.0-26
- drop qgtk2/bb10 conditionals
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
qt5-qtsvg-5.11.1-2.fc28 (FEDORA-2018-bea1e0b465)
Qt5 - Support for rendering and displaying SVG
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Sat Jul 14 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 5.11.1-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Wed Jun 20 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.1-1
- 5.11.1
* Sun May 27 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.0-1
- 5.11.0
- use %make_build %ldconfig_scriptlets
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
qt5-qttools-5.11.1-2.fc28 (FEDORA-2018-bea1e0b465)
Qt5 - QtTool components
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Sat Jul 14 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 5.11.1-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Wed Jun 20 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.1-1
- 5.11.1
* Sat May 26 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.0-1
- 5.11.0
- use %make_build
* Thu Mar 8 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.10.1-2
- BR: qt5-rpm-macros
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
qt5-qttranslations-5.11.1-2.fc28 (FEDORA-2018-bea1e0b465)
Qt5 - QtTranslations module
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Sat Jul 14 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 5.11.1-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Wed Jun 20 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.1-1
- 5.11.1
* Sun May 27 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.0-1
- 5.11.0
- use %make_build
- make BR: qt5-qbase-devel unversioned
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
qt5-qtvirtualkeyboard-5.11.1-2.fc28 (FEDORA-2018-bea1e0b465)
Qt5 - VirtualKeyboard component
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Sat Jul 14 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 5.11.1-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Wed Jun 20 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.1-1
- 5.11.1
* Sun May 27 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.0-1
- 5.11.0
- use %make_build %ldconfig_scriptlets
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
qt5-qtwayland-5.11.1-2.fc28 (FEDORA-2018-bea1e0b465)
Qt5 - Wayland platform support and QtCompositor module
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Sat Jul 14 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 5.11.1-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Wed Jun 20 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.1-1
- 5.11.1
* Sun May 27 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.0-1
- 5.11.0
- use %make_build %ldconfig_scriptlets
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
qt5-qtwebchannel-5.11.1-2.fc28 (FEDORA-2018-bea1e0b465)
Qt5 - WebChannel component
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Sat Jul 14 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 5.11.1-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Wed Jun 20 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.1-1
- 5.11.1
* Sun May 27 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.0-1
- 5.11.0
- use %make_build %ldconfig_scriptlets
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
qt5-qtwebengine-5.11.1-4.fc28 (FEDORA-2018-bea1e0b465)
Qt5 - QtWebEngine components
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Sun Jul 15 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.1-4
- BR: /usr/bin/python
* Sat Jul 14 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 5.11.1-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Tue Jul 10 2018 Pete Walter <pwalter(a)fedoraproject.org> - 5.11.1-2
- Rebuild for ICU 62
* Fri Jun 22 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.1-1
- 5.11.1
* Wed Jun 20 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.0-2
- rebuild (qt5)
* Thu Jun 14 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.0-1
- 5.11.0
- drop shadow build (to match other qt5 packages where it has been problematic)
- drop upstreamed patches
- rebase no-icudtl-dat.patch
- pull in upstream gcc8 FTBFS fix
- update clean_ffmpeg whitelist
- patches needswork: system-nspr-prtime,system-icu-utf,no-sse2,skia-neon,icu59
- minimal debug/debuginfo (for now)
- use macros %make_build %ldconfig_scriptlets %__ninja %__ninja_common_opts
* Sun May 27 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.10.1-7
- rebuild (qt5 5.11.0)
- Add patch by spot from the Fedora Chromium RPM for FTBFS with GCC 8 on i686
- include 0027-Fix-compilation-of-simplebrowser-example.patch (5.11 branch)
* Mon Apr 30 2018 Pete Walter <pwalter(a)fedoraproject.org> - 5.10.1-6
- Rebuild for ICU 61.1
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
qt5-qtwebkit-5.212.0-0.27.alpha2.fc28 (FEDORA-2018-bea1e0b465)
Qt5 - QtWebKit components
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Wed Jul 25 2018 Christian Dersch <lupinix(a)fedoraproject.org> - 5.212.0-0.27.alpha2
- Disable annobin for now, workaround for RHBZ #1608549
* Tue Jul 24 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.212.0-0.26.alpha2
- backport some pkgconfig-related upstream fixes
- use %ldconfig_scriptlets
* Sat Jul 14 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 5.212.0-0.25.alpha2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Tue Jul 10 2018 Pete Walter <pwalter(a)fedoraproject.org> - 5.212.0-0.24.alpha2
- Rebuild for ICU 62
* Wed Jun 20 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.212.0-0.23.alpha2
- rebuild (qt5)
* Sun May 27 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.212.0-0.22.alpha2
- rebuild (qt5)
- workaround gcc8 FTBFS with -fpermissive (#1582954)
* Mon Apr 30 2018 Pete Walter <pwalter(a)fedoraproject.org> - 5.212.0-0.21.alpha2
- Rebuild for ICU 61.1
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
qt5-qtwebsockets-5.11.1-2.fc28 (FEDORA-2018-bea1e0b465)
Qt5 - WebSockets component
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Sat Jul 14 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 5.11.1-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Wed Jun 20 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.1-1
- 5.11.1
* Sun May 27 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.0-1
- 5.11.0
- use %make_build %ldconfig_scriptlets
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
qt5-qtwebview-5.11.1-3.fc28 (FEDORA-2018-bea1e0b465)
Qt5 - WebView component
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Sun Jul 15 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.1-3
- use %{_qt5_archdatadir}/mkspecs
* Sat Jul 14 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 5.11.1-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Wed Jun 20 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.1-1
- 5.11.1
* Sun May 27 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.0-1
- 5.11.0
- use %make_build %ldconfig_scriptlets
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
qt5-qtx11extras-5.11.1-2.fc28 (FEDORA-2018-bea1e0b465)
Qt5 - X11 support library
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Sat Jul 14 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 5.11.1-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Wed Jun 20 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.1-1
- 5.11.1
* Sun May 27 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.0-1
- 5.11.0,
- use %make_build %ldconfig_scriptlets
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
qt5-qtxmlpatterns-5.11.1-3.fc28 (FEDORA-2018-bea1e0b465)
Qt5 - QtXmlPatterns component
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Sat Jul 14 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 5.11.1-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Sat Jun 30 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.1-2
- rebuild
* Tue Jun 19 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.1-1
- 5.11.1
* Wed May 23 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.11.0-1
- 5.11.0
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
qt5ct-0.35-2.fc28 (FEDORA-2018-bea1e0b465)
Qt5 Configuration Tool
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Sun May 27 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 0.35-2
- rebuild (qt5)
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
redhat-rpm-config-109-1.fc28 (FEDORA-2018-e91af5e4f9)
Red Hat specific rpm configuration files
--------------------------------------------------------------------------------
Update Information:
Allow overriding the date in forge's dist macro.
--------------------------------------------------------------------------------
ChangeLog:
* Thu Aug 30 2018 Fabio Valentini <decathorpe(a)gmail.com> - 109-1
- Allow overriding the date in forge's dist macro.
--------------------------------------------------------------------------------
================================================================================
runc-1.0.0-51.dev.gitfdd8055.fc28 (FEDORA-2018-3a6947a4a4)
CLI for running Open Containers
--------------------------------------------------------------------------------
Update Information:
Fix tmpcopyup to work correctly.
--------------------------------------------------------------------------------
ChangeLog:
* Fri Aug 31 2018 Dan Walsh <dwalsh(a)redhat.name> - 2:1.0.0-51.dev.gitfdd8055
- Fix handling of tmpcopyup
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1612260 - Man page scan results for runc
https://bugzilla.redhat.com/show_bug.cgi?id=1612260
--------------------------------------------------------------------------------
================================================================================
skrooge-2.14.0-1.fc28 (FEDORA-2018-bea1e0b465)
Personal finances manager
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Sun Jul 1 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 2.14.0-1
- skrooge-2.14.0 (#1594790)
* Thu Jun 21 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 2.13.0-3
- rebuild (qt5)
* Mon May 28 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 2.13.0-2
- rebuild (qt5)
* Tue May 8 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 2.13.0-1
- skrooge-2.13.0 (#1575967)
* Mon Apr 2 2018 Bill Nottingham <notting(a)splat.cc> - 2.12.0-2
- rebuild for libofx soname change
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
texmaker-5.0.2-6.fc28 (FEDORA-2018-bea1e0b465)
LaTeX editor
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Sun May 27 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 1:5.0.2-6
- rebuild (qt5)
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
ugene-1.31.0-3.fc28 (FEDORA-2018-bea1e0b465)
Integrated bioinformatics toolkit
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Sun Aug 26 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 1.31.0-3
- (branch) rebuild for qt5
* Fri Aug 24 2018 Yuliya Algaer <yalgaer(a)fedoraproject.org> - 1.31.0-2
- New upstream release
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
virtualbox-guest-additions-5.2.18-1.fc28 (FEDORA-2018-af2d1a6a6a)
VirtualBox Guest Additions
--------------------------------------------------------------------------------
Update Information:
Update Virtualbox Guest Additions to 5.2.18
--------------------------------------------------------------------------------
ChangeLog:
* Thu Aug 30 2018 S��rgio Basto <sergio(a)serjux.com> - 5.2.18-1
- Update Virtualbox Guest Additions to 5.2.18
--------------------------------------------------------------------------------
================================================================================
xdg-desktop-portal-kde-5.13.4-3.fc28 (FEDORA-2018-bea1e0b465)
Backend implementation for xdg-desktop-portal using Qt/KF5
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Fri Aug 31 2018 Jan Grulich <jgrulich(a)redhat.com> - 5.13.4-3
- Do not link against libspa
* Wed Aug 22 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 5.13.4-2
- rebuild
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
yarock-1.3.1-2.fc28 (FEDORA-2018-bea1e0b465)
Lightweight, beautiful music player
--------------------------------------------------------------------------------
Update Information:
Qt 5.11.1 Release, see also http://blog.qt.io/blog/2018/05/22/qt-5-11-released/
and http://blog.qt.io/blog/2018/06/19/qt-5-11-1-released/ ---- The new
version of ugene introduces a lot of major features for NGS data analysis: 1.
Quality control: a new tool Trimmomatic was integrated for quality control of
NGS reads. It allows one to cut Illumina adapters, trim reads ends by quality,
trim reads by length, etc. 2. De novo assembly: SPAdes was updated to version
3.12.0. Graphical interface for the tool in UGENE was updated. It is now
possible to input hybrid data, for example, assemble Illumina and Oxford
Nanopore reads. 3. Metagenomics: a new infrastructure for taxonomy
classification of whole-genome shotgun sequencing data was developed. This
includes tools Kraken, CLARK, DIAMOND, WEVOTE and other. Reference data for the
tools are also provided: NCBI taxonomy information; RefSeq data for viruses,
bacteria, human; etc. 4. Transcriptomics: a new tool StringTie was integrated.
--------------------------------------------------------------------------------
ChangeLog:
* Sun May 27 2018 Rex Dieter <rdieter(a)fedoraproject.org> - 1.3.1-2
- rebuild (qt5)
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1611166 - systemmonitor, ksysguard - failed apply last configuration
https://bugzilla.redhat.com/show_bug.cgi?id=1611166
[ 2 ] Bug #1591984 - print dialog "advanced tab" missing in qt5/kf5 based applications
https://bugzilla.redhat.com/show_bug.cgi?id=1591984
[ 3 ] Bug #1584240 - Qt 5.11 Tracker
https://bugzilla.redhat.com/show_bug.cgi?id=1584240
--------------------------------------------------------------------------------
================================================================================
yum-utils-1.1.31-515.fc28 (FEDORA-2018-4f0089c995)
Utilities based around the yum package manager
--------------------------------------------------------------------------------
Update Information:
Security fix for CVE-2018-10897
--------------------------------------------------------------------------------
ChangeLog:
* Fri Aug 31 2018 Michal Domonkos <mdomonko(a)redhat.com> - 1.1.31-515
- reposync: prevent path traversal (CVE-2018-10897)
- Resolves: bug#1600454
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1600221 - CVE-2018-10897 yum-utils: reposync: improper path validation may lead to directory traversal
https://bugzilla.redhat.com/show_bug.cgi?id=1600221
--------------------------------------------------------------------------------
11 months, 3 weeks
- 1
- 0
Fedora 27 updates-testing report
by updates＠fedoraproject.org
The following Fedora 27 Security updates need testing:
Age URL
196 https://bodhi.fedoraproject.org/updates/FEDORA-2018-1ec1cd6db3 bro-2.5.3-1.fc27
128 https://bodhi.fedoraproject.org/updates/FEDORA-2018-8dc6395408 dpdk-17.08.2-1.fc27
91 https://bodhi.fedoraproject.org/updates/FEDORA-2018-3b33f65b01 nodejs-brace-expansion-1.1.11-1.fc27
82 https://bodhi.fedoraproject.org/updates/FEDORA-2018-a748acc219 unrtf-0.21.9-8.fc27
59 https://bodhi.fedoraproject.org/updates/FEDORA-2018-f6ccdeb750 mailman-2.1.21-9.fc27
59 https://bodhi.fedoraproject.org/updates/FEDORA-2018-bc864bb9e1 openslp-2.0.0-15.fc27
16 https://bodhi.fedoraproject.org/updates/FEDORA-2018-21ffebf41c tomcat-8.0.53-1.fc27
16 https://bodhi.fedoraproject.org/updates/FEDORA-2018-e8533a3ef1 unixODBC-2.3.7-1.fc27
16 https://bodhi.fedoraproject.org/updates/FEDORA-2018-7051d682fa ntp-4.2.8p12-1.fc27
8 https://bodhi.fedoraproject.org/updates/FEDORA-2018-e914e7a9e2 chromium-68.0.3440.106-3.fc27
7 https://bodhi.fedoraproject.org/updates/FEDORA-2018-fac5420dd1 obs-build-20180816-291.1.1.fc27 osc-0.163.0-237.1.1.fc27
7 https://bodhi.fedoraproject.org/updates/FEDORA-2018-3a3c660bfa community-mysql-5.7.23-1.fc27
6 https://bodhi.fedoraproject.org/updates/FEDORA-2018-11ed8d95e2 libxkbcommon-0.8.2-1.fc27
4 https://bodhi.fedoraproject.org/updates/FEDORA-2018-fe437a98d6 dolphin-emu-5.0-24.fc27
4 https://bodhi.fedoraproject.org/updates/FEDORA-2018-f56ded11c4 openssh-7.6p1-6.fc27
3 https://bodhi.fedoraproject.org/updates/FEDORA-2018-4f0b7d1251 tcpflow-1.5.0-2.fc27
3 https://bodhi.fedoraproject.org/updates/FEDORA-2018-7626df1731 yara-3.8.1-1.fc27
1 https://bodhi.fedoraproject.org/updates/FEDORA-2018-6121f427e5 godot-3.0.6-1.fc27
1 https://bodhi.fedoraproject.org/updates/FEDORA-2018-a42eb4ac61 python-pycryptodomex-3.6.6-1.fc27
1 https://bodhi.fedoraproject.org/updates/FEDORA-2018-236b486e01 capstone-3.0.5-1.fc27
1 https://bodhi.fedoraproject.org/updates/FEDORA-2018-28447b6f2e ghostscript-9.22-5.fc27
1 https://bodhi.fedoraproject.org/updates/FEDORA-2018-a94668408d mod_perl-2.0.10-9.fc27
1 https://bodhi.fedoraproject.org/updates/FEDORA-2018-c1ef35a4f9 glibc-2.26-30.fc27
1 https://bodhi.fedoraproject.org/updates/FEDORA-2018-bb7f3f7ecf gd-2.2.5-6.fc27
The following Fedora 27 Critical Path updates have yet to be approved:
Age URL
112 https://bodhi.fedoraproject.org/updates/FEDORA-2018-25d5c86330 libidn-1.34-2.fc27 mcabber-1.1.0-1.fc27.1 pidgin-2.13.0-1.fc27.1 python-slixmpp-1.3.0-5.fc27.1
72 https://bodhi.fedoraproject.org/updates/FEDORA-2018-200dba6b93 upower-0.99.8-1.fc27
36 https://bodhi.fedoraproject.org/updates/FEDORA-2018-05a68ea22e geoclue2-2.4.11-1.fc27
16 https://bodhi.fedoraproject.org/updates/FEDORA-2018-20c3deae24 iproute-4.17.0-1.fc27
14 https://bodhi.fedoraproject.org/updates/FEDORA-2018-9320eeea0a pungi-4.1.27-1.fc27
9 https://bodhi.fedoraproject.org/updates/FEDORA-2018-344f454318 sssd-1.16.3-2.fc27
9 https://bodhi.fedoraproject.org/updates/FEDORA-2018-6499677be6 firefox-61.0.2-3.fc27
9 https://bodhi.fedoraproject.org/updates/FEDORA-2018-90a16ffef6 ostree-2018.7-1.fc27 flatpak-builder-1.0.0-1.fc27 flatpak-1.0.0-1.fc27
8 https://bodhi.fedoraproject.org/updates/FEDORA-2018-91f97e9d4f glusterfs-3.12.13-1.fc27
6 https://bodhi.fedoraproject.org/updates/FEDORA-2018-a39edb9f02 kernel-headers-4.17.19-1.fc27 kernel-tools-4.17.19-100.fc27 kernel-4.17.19-100.fc27
6 https://bodhi.fedoraproject.org/updates/FEDORA-2018-11ed8d95e2 libxkbcommon-0.8.2-1.fc27
4 https://bodhi.fedoraproject.org/updates/FEDORA-2018-f56ded11c4 openssh-7.6p1-6.fc27
3 https://bodhi.fedoraproject.org/updates/FEDORA-2018-53d71963af vim-8.1.328-1.fc27
1 https://bodhi.fedoraproject.org/updates/FEDORA-2018-7c8794e690 perl-PathTools-3.75-1.fc27
1 https://bodhi.fedoraproject.org/updates/FEDORA-2018-c1ef35a4f9 glibc-2.26-30.fc27
1 https://bodhi.fedoraproject.org/updates/FEDORA-2018-c223c11259 libldb-1.3.2-2.fc27.1.2.3 samba-4.7.10-0.fc27
The following builds have been pushed to Fedora 27 updates-testing
R-littler-0.3.4-1.fc27
buku-3.9-1.fc27
dmlite-1.10.4-2.fc27
dokuwiki-20180422a-2.fc27
fbreader-0.99.4-2.fc27
iniparser-4.0-7.20160821git.fc27
js-jsroot-5.5.1-1.fc27
keepassxc-2.3.4-1.fc27
libs3-4.1-0.1.20180821gita4d873f.fc27
pango-1.40.14-3.fc27
perl-Net-DNS-SEC-1.10-1.fc27
redhat-rpm-config-79-1.fc27
yum-utils-1.1.31-514.fc27
Details about builds:
================================================================================
R-littler-0.3.4-1.fc27 (FEDORA-2018-f4597d89ea)
littler: R at the Command-Line via 'r'
--------------------------------------------------------------------------------
Update Information:
littler 0.3.4 (mainly updates to examples).
--------------------------------------------------------------------------------
ChangeLog:
* Fri Aug 31 2018 Mattias Ellert <mattias.ellert(a)physics.uu.se> - 0.3.4-1
- New upstream release 0.3.4
* Thu Jul 12 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 0.3.3-6
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Tue Jul 10 2018 Pete Walter <pwalter(a)fedoraproject.org> - 0.3.3-5
- Rebuild for ICU 62
* Fri May 18 2018 Tom Callaway <spot(a)fedoraproject.org> - 0.3.3-4.1
- actually rebuild against R 3.5.0
--------------------------------------------------------------------------------
================================================================================
buku-3.9-1.fc27 (FEDORA-2018-ef60901785)
Powerful command-line bookmark manager
--------------------------------------------------------------------------------
Update Information:
Release 3.9
--------------------------------------------------------------------------------
ChangeLog:
* Thu Aug 30 2018 Robert-Andr�� Mauchin <zebob.m(a)gmail.com> - 3.9-1
- Release 3.9
--------------------------------------------------------------------------------
================================================================================
dmlite-1.10.4-2.fc27 (FEDORA-2018-1e57f29c7c)
Lcgdm grid data management and storage framework
--------------------------------------------------------------------------------
Update Information:
Bugfixes and improvements, in particular to service stability and space
management. ---- Bugfixes and improvements, in particular to service stability
and space management. ---- Fix for domeadapter configuration.
--------------------------------------------------------------------------------
ChangeLog:
* Thu Aug 30 2018 Oliver Keeble <oliver.keeble(a)cern.ch> - 1.10.4-2
- Update dmlite-shell deps
* Mon Aug 27 2018 Oliver Keeble <oliver.keeble(a)cern.ch> - 1.10.4-1
- New upstream release 1.10.4
* Thu Jul 12 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 1.10.3-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Thu Jun 7 2018 Oliver Keeble <oliver.keeble(a)cern.ch> - 1.10.3-1
- New upstream release
* Thu Apr 19 2018 Andrea Manzi <amanzi(a)cern.ch> - 1.10.2-1
- new upstream release
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1603802 - dmlite: FTBFS in Fedora rawhide
https://bugzilla.redhat.com/show_bug.cgi?id=1603802
--------------------------------------------------------------------------------
================================================================================
dokuwiki-20180422a-2.fc27 (FEDORA-2018-a1bd27f59b)
Standards compliant simple to use wiki
--------------------------------------------------------------------------------
Update Information:
Fix Requires: ("python2-policycoreutils" is called "policycoreutils-python" in
F27) ---- Update to upstream version 2018-04-22a
--------------------------------------------------------------------------------
ChangeLog:
* Thu Aug 30 2018 Artur Iwicki <fedora(a)svgames.pl> - 20180422a-2
- Change dokuwiki-selinux Requires: ("python2-policycoreutils" is called "policycoreutils-python" in F27)
* Sat Aug 25 2018 Artur Iwicki <fedora(a)svgames.pl> - 20180422a-1
- Change the versioning scheme
* Mon Aug 20 2018 Artur Iwicki <fedora(a)svgames.pl> - 0-0.32.20180422a
- Remove the "Group:" tag (no longer used in Fedora)
- Replace the hand-written %releasetag with one generated from %releasenum
* Fri Jul 13 2018 Peter 'Pessoft' Kol��nek <fedora(a)pessoft.com> - 0-0.31.20180422a
- Update to the latest stable upstream 2018-04-22a "Greebo" (#1390291: CVE-2016-7964, CVE-2016-7965, CVE-2017-12583, CVE-2017-12979, CVE-2017-12980, CVE-2017-18123)
- Fix missing vendor directory issue (#1372948)
- Fix Apache config file for access to conf and bin
- Replace more bundled code in vendor directory with Fedora packages (lesserphp, random_compat, phpseclib, simplepie)
- Fix source to HTTPS
* Fri Mar 30 2018 Iryna Shcherbina <ishcherb(a)redhat.com> - 0-0.30.20150810a
- Update Python 2 dependency declarations to new packaging standards
(See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3)
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1390291 - CVE-2016-7964 CVE-2016-7965 CVE-2017-12583 CVE-2017-12979 CVE-2017-12980 CVE-2017-18123 dokuwiki: Various flaws [fedora-all]
https://bugzilla.redhat.com/show_bug.cgi?id=1390291
[ 2 ] Bug #1372948 - Error 500 due to missing vendor directory /usr/share/dokuwiki/vendor
https://bugzilla.redhat.com/show_bug.cgi?id=1372948
--------------------------------------------------------------------------------
================================================================================
fbreader-0.99.4-2.fc27 (FEDORA-2018-8d640a4e80)
E-book reader
--------------------------------------------------------------------------------
Update Information:
Updates to latest fbreader; simplify packaging now that only one GUI toolkit is
supported
--------------------------------------------------------------------------------
ChangeLog:
* Thu Aug 30 2018 Michel Alexandre Salim <salimma(a)fedoraproject.org> - 0.99.4-2
- Exclude building on armv7hl (bz #1624218)
* Wed Aug 29 2018 Michel Alexandre Salim <salimma(a)fedoraproject.org> - 0.99.4-1
- Update to 0.99.4
- Obsolete zlibrary-ui-{gtk,qt} - only Qt4 is supported now
* Fri Jul 13 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 0.12.10-24
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Wed Feb 7 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 0.12.10-23
- Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild
* Wed Aug 2 2017 Fedora Release Engineering <releng(a)fedoraproject.org> - 0.12.10-22
- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Binutils_Mass_Rebuild
* Wed Jul 26 2017 Fedora Release Engineering <releng(a)fedoraproject.org> - 0.12.10-21
- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Mass_Rebuild
* Fri Feb 10 2017 Fedora Release Engineering <releng(a)fedoraproject.org> - 0.12.10-20
- Rebuilt for https://fedoraproject.org/wiki/Fedora_26_Mass_Rebuild
* Wed Feb 3 2016 Fedora Release Engineering <releng(a)fedoraproject.org> - 0.12.10-19
- Rebuilt for https://fedoraproject.org/wiki/Fedora_24_Mass_Rebuild
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1603949 - fbreader: FTBFS in Fedora rawhide
https://bugzilla.redhat.com/show_bug.cgi?id=1603949
--------------------------------------------------------------------------------
================================================================================
iniparser-4.0-7.20160821git.fc27 (FEDORA-2018-a2316e0baf)
C library for parsing "INI-style" files
--------------------------------------------------------------------------------
Update Information:
Security fix for BZ#1545825
--------------------------------------------------------------------------------
ChangeLog:
* Fri Aug 31 2018 Robin Lee <cheeselee(a)fedoraproject.org> - 4.0-7.20160821git
- Backport fix for BZ#1545825
* Fri Jul 13 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 4.0-6.20160821git
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Wed Feb 7 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 4.0-5.20160821git
- Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1545824 - iniparser: stack-buffer-underflow in iniparser_load in iniparser.c
https://bugzilla.redhat.com/show_bug.cgi?id=1545824
--------------------------------------------------------------------------------
================================================================================
js-jsroot-5.5.1-1.fc27 (FEDORA-2018-c523cabd5b)
JavaScript ROOT - Interactive numerical data analysis graphics
--------------------------------------------------------------------------------
Update Information:
https://github.com/root-project/jsroot/blob/5.5.1/changes.md
--------------------------------------------------------------------------------
ChangeLog:
* Thu Aug 30 2018 Mattias Ellert <mattias.ellert(a)physics.uu.se> - 5.5.1-1
- Update to version 5.5.1
--------------------------------------------------------------------------------
================================================================================
keepassxc-2.3.4-1.fc27 (FEDORA-2018-93e6e9b389)
Cross-platform password manager
--------------------------------------------------------------------------------
Update Information:
2.3.4 release
--------------------------------------------------------------------------------
ChangeLog:
* Wed Aug 29 2018 Mukundan Ragavan <nonamedotc(a)fedoraproject.org> - 2.3.4-1
- Update to 2.3.4
* Thu Jul 19 2018 Mukundan Ragavan <nonamedotc(a)fedoraproject.org> - 2.3.3-3
- Fix FTBFS
* Fri Jul 13 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 2.3.3-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1623294 - KeePassXC 2.3.4 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1623294
--------------------------------------------------------------------------------
================================================================================
libs3-4.1-0.1.20180821gita4d873f.fc27 (FEDORA-2018-7359f568e2)
C Library and Tools for Amazon S3 Access
--------------------------------------------------------------------------------
Update Information:
libs3 4.1.
--------------------------------------------------------------------------------
ChangeLog:
* Fri Aug 31 2018 Mattias Ellert <mattias.ellert(a)physics.uu.se> - 4.1-0.1.20180821gita4d873f
- New github snapshot
* Mon Jul 16 2018 Mattias Ellert <mattias.ellert(a)physics.uu.se> - 4.0-0.6.20170206git208bcba
- Add BuildRequires on gcc
- Packaging updates
- Remove Group and BuildRoot tags
- Don't clear the buildroot in the install section
- Remove the clean section
- Install license in licensedir
- Use new ldconfig scriptlets macro
* Fri Jul 13 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 4.0-0.5.20170206git208bcba
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Wed Feb 7 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 4.0-0.4.20170206git208bcba
- Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild
--------------------------------------------------------------------------------
================================================================================
pango-1.40.14-3.fc27 (FEDORA-2018-83116f8692)
System for layout and rendering of internationalized text
--------------------------------------------------------------------------------
Update Information:
Security fix for CVE-2018-15120
--------------------------------------------------------------------------------
ChangeLog:
* Fri Aug 31 2018 Peng Wu <pwu(a)redhat.com> - 1.40.14-3
- Security fix for CVE-2018-15120
* Fri Aug 31 2018 Peng Wu <pwu(a)redhat.com> - 1.40.14-2
- Fixes crash with invalid Unicode sequences
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1613550 - CVE-2018-15120 pango: application crash triggered by unicode chars in pango-emoji.c
https://bugzilla.redhat.com/show_bug.cgi?id=1613550
--------------------------------------------------------------------------------
================================================================================
perl-Net-DNS-SEC-1.10-1.fc27 (FEDORA-2018-f632ec12b9)
DNSSEC modules for Perl
--------------------------------------------------------------------------------
Update Information:
Update to 1.10
--------------------------------------------------------------------------------
ChangeLog:
* Fri Aug 31 2018 Paul Wouters <pwouters(a)redhat.com> - 1.10-1
- Update to 1.10
* Fri Jul 13 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 1.09-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Fri Jun 29 2018 Jitka Plesnikova <jplesnik(a)redhat.com> - 1.09-2
- Perl 5.28 rebuild
* Thu Jun 21 2018 Jitka Plesnikova <jplesnik(a)redhat.com> - 1.09-1
- 1.09 bump
* Wed May 30 2018 Jitka Plesnikova <jplesnik(a)redhat.com> - 1.08-1
- 1.08 bump
* Tue Mar 20 2018 Wes Hardaker <wjhns174(a)hardakers.net> - 1.05-1
- 1.05 bump
* Fri Feb 16 2018 Jitka Plesnikova <jplesnik(a)redhat.com> - 1.04-1
- 1.04 bump
--------------------------------------------------------------------------------
================================================================================
redhat-rpm-config-79-1.fc27 (FEDORA-2018-ec50f052bf)
Red Hat specific rpm configuration files
--------------------------------------------------------------------------------
Update Information:
Allow overriding the date in forge's dist macro.
--------------------------------------------------------------------------------
ChangeLog:
* Fri Aug 31 2018 Fabio Valentini <decathorpe(a)gmail.com> - 79-1
- Allow overriding the date in forge's dist macro.
--------------------------------------------------------------------------------
================================================================================
yum-utils-1.1.31-514.fc27 (FEDORA-2018-3aafb854a9)
Utilities based around the yum package manager
--------------------------------------------------------------------------------
Update Information:
Security fix for CVE-2018-10897
--------------------------------------------------------------------------------
ChangeLog:
* Fri Aug 31 2018 Michal Domonkos <mdomonko(a)redhat.com> - 1.1.31-514
- reposync: prevent path traversal (CVE-2018-10897)
- Resolves: bug#1600454
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1600221 - CVE-2018-10897 yum-utils: reposync: improper path validation may lead to directory traversal
https://bugzilla.redhat.com/show_bug.cgi?id=1600221
--------------------------------------------------------------------------------
11 months, 3 weeks
- 1
- 0
Fedora 29 updates-testing report
by updates＠fedoraproject.org
The following Fedora 29 Security updates need testing:
Age URL
1 https://bodhi.fedoraproject.org/updates/FEDORA-2018-8d58297dc0 godot-3.0.6-1.fc29
1 https://bodhi.fedoraproject.org/updates/FEDORA-2018-4f06058324 python-pycryptodomex-3.6.6-1.fc29
1 https://bodhi.fedoraproject.org/updates/FEDORA-2018-974e947d3b capstone-3.0.5-1.fc29
1 https://bodhi.fedoraproject.org/updates/FEDORA-2018-f6a5b71464 mod_perl-2.0.10-13.fc29
1 https://bodhi.fedoraproject.org/updates/FEDORA-2018-d35c521664 ghostscript-9.23-7.fc29
The following Fedora 29 Critical Path updates have yet to be approved:
Age URL
1 https://bodhi.fedoraproject.org/updates/FEDORA-2018-d4ff3d0e77 fontconfig-2.13.1-1.fc29
1 https://bodhi.fedoraproject.org/updates/FEDORA-2018-a802cec5b0 perl-PathTools-3.75-1.fc29
1 https://bodhi.fedoraproject.org/updates/FEDORA-2018-9281f40252 libssh-0.8.2-1.fc29
1 https://bodhi.fedoraproject.org/updates/FEDORA-2018-0a8bc5441c ibus-1.5.19-3.fc29
1 https://bodhi.fedoraproject.org/updates/FEDORA-2018-294230d586 sssd-2.0.0-3.fc29
1 https://bodhi.fedoraproject.org/updates/FEDORA-2018-7baa4e2d9d glibc-2.28-9.fc29
1 https://bodhi.fedoraproject.org/updates/FEDORA-2018-8500fd9cad libtool-2.4.6-27.fc29
1 https://bodhi.fedoraproject.org/updates/FEDORA-2018-c9f46b761a gnome-software-3.29.92-1.fc29
1 https://bodhi.fedoraproject.org/updates/FEDORA-2018-6c2cb070f3 flatpak-1.0.1-1.fc29
1 https://bodhi.fedoraproject.org/updates/FEDORA-2018-653835319b at-spi2-core-2.28.0-4.fc29
The following builds have been pushed to Fedora 29 updates-testing
R-littler-0.3.4-1.fc29
anaconda-29.24.2-1.fc29
authselect-1.0-2.fc29
buku-3.9-1.fc29
castxml-0.1-0.25.20180806gitae93121.fc29
discord-irc-2.6.1-2.fc29
dmlite-1.10.4-2.fc29
dnssec-tools-2.2.3-1.fc29
erlang-webmachine-1.10.9-1.fc29
fbreader-0.99.4-2.fc29
fldigi-4.0.18-1.fc29
fmt-3.0.2-7.fc29
grub2-2.02-52.fc29
iniparser-4.0-7.20160821git.fc29
iproute-4.18.0-3.fc29
js-jsroot-5.5.1-1.fc29
libcacard-2.6.1-1.fc29
libs3-4.1-0.1.20180821gita4d873f.fc29
mingw-libarchive-3.3.2-1.fc29
nettle-3.4-5.fc29
nodejs-discord-js-11.4.2-1.fc29
nodejs-irc-upd-0.10.0-2.fc29
nodejs-tweetnacl-1.0.0-1.fc29
openssh-7.8p1-2.fc29
perl-Pegex-0.65-1.fc29
pypy-6.0.0-3.fc29
python-blivet-3.1.0-2.fc29
python-llfuse-1.3.5-1.fc29
python2-2.7.15-8.fc29
python3-3.7.0-9.fc29
speech-tools-2.5-6.fc29
virtualbox-guest-additions-5.2.18-1.fc29
Details about builds:
================================================================================
R-littler-0.3.4-1.fc29 (FEDORA-2018-1afde738e7)
littler: R at the Command-Line via 'r'
--------------------------------------------------------------------------------
Update Information:
littler 0.3.4 (mainly updates to examples).
--------------------------------------------------------------------------------
ChangeLog:
* Fri Aug 31 2018 Mattias Ellert <mattias.ellert(a)physics.uu.se> - 0.3.4-1
- New upstream release 0.3.4
--------------------------------------------------------------------------------
================================================================================
anaconda-29.24.2-1.fc29 (FEDORA-2018-85853d46b5)
Graphical system installer
--------------------------------------------------------------------------------
Update Information:
Fix some ARM issues
--------------------------------------------------------------------------------
ChangeLog:
* Thu Aug 30 2018 Martin Kolman <mkolman(a)redhat.com> - 29.24.2-1
- Set kickstart version for Fedora 29 (mkolman)
- Add initial 32-bit ARMv7 EFI support (pbrobinson)
- Drop legacy get_arm_machine pieces (pbrobinson)
- arch: arm: drop omap checks and specifics (pbrobinson)
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1544962 - AArch64 EFI systems default to MBR rather than GPT partitioning
https://bugzilla.redhat.com/show_bug.cgi?id=1544962
--------------------------------------------------------------------------------
================================================================================
authselect-1.0-2.fc29 (FEDORA-2018-fb80a3baee)
Configures authentication and identity sources from supported profiles
--------------------------------------------------------------------------------
Update Information:
This update fixes [a bug](https://bugzilla.redhat.com/show_bug.cgi?id=1618865)
whereby authselect would write an invalid pwquality configuration file, breaking
all pwquality-based operations, including setting passwords in anaconda and
gnome-initial-setup. If you had `authselect-1.0-1.fc29` installed, we recommend
removing the file `/etc/security/pwquality.conf.d/10-authconfig-pwquality.conf`
and running `authconfig --update` after installing this update.
--------------------------------------------------------------------------------
ChangeLog:
* Thu Aug 30 2018 Adam Williamson <awilliam(a)redhat.com> - 1.0-2
- Backport PR #78 to fix broken pwquality config (RHBZ #1618865)
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1618865 - authselect installs (but does not own) broken pwquality config file, breaks anaconda, cryptsetup, probably others
https://bugzilla.redhat.com/show_bug.cgi?id=1618865
--------------------------------------------------------------------------------
================================================================================
buku-3.9-1.fc29 (FEDORA-2018-caa7e9d49e)
Powerful command-line bookmark manager
--------------------------------------------------------------------------------
Update Information:
Release 3.9
--------------------------------------------------------------------------------
ChangeLog:
* Thu Aug 30 2018 Robert-Andr�� Mauchin <zebob.m(a)gmail.com> - 3.9-1
- Release 3.9
--------------------------------------------------------------------------------
================================================================================
castxml-0.1-0.25.20180806gitae93121.fc29 (FEDORA-2018-ebbc35a264)
C-family abstract syntax tree XML output tool
--------------------------------------------------------------------------------
Update Information:
New git snapshot.
--------------------------------------------------------------------------------
ChangeLog:
* Thu Aug 30 2018 Mattias Ellert <mattias.ellert(a)physics.uu.se> - 0.1-0.25.20180806gitae93121
- New git snapshot (supports LLVM7)
--------------------------------------------------------------------------------
================================================================================
discord-irc-2.6.1-2.fc29 (FEDORA-2018-08dffd2fd7)
Connects Discord and IRC channels by sending messages back and forth
--------------------------------------------------------------------------------
Update Information:
Initial package.
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1622694 - Review Request: discord-irc - Connects Discord and IRC channels by sending messages back and forth
https://bugzilla.redhat.com/show_bug.cgi?id=1622694
--------------------------------------------------------------------------------
================================================================================
dmlite-1.10.4-2.fc29 (FEDORA-2018-a1601403e6)
Lcgdm grid data management and storage framework
--------------------------------------------------------------------------------
Update Information:
Bugfixes and improvements, in particular to service stability and space
management. ---- Bugfixes and improvements, in particular to service stability
and space management.
--------------------------------------------------------------------------------
ChangeLog:
* Thu Aug 30 2018 Oliver Keeble <oliver.keeble(a)cern.ch> - 1.10.4-2
- Update dmlite-shell deps
* Mon Aug 27 2018 Oliver Keeble <oliver.keeble(a)cern.ch> - 1.10.4-1
- New upstream release 1.10.4
* Thu Jul 12 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 1.10.3-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1603802 - dmlite: FTBFS in Fedora rawhide
https://bugzilla.redhat.com/show_bug.cgi?id=1603802
--------------------------------------------------------------------------------
================================================================================
dnssec-tools-2.2.3-1.fc29 (FEDORA-2018-36f4ec8918)
A suite of tools for managing dnssec aware DNS usage
--------------------------------------------------------------------------------
Update Information:
match upstream version to build correctly
--------------------------------------------------------------------------------
ChangeLog:
* Wed Aug 29 2018 Wes Hardaker <wjhns174(a)hardakers.net> - 2.2.3-1
- match upstream version
* Wed Aug 29 2018 Wes Hardaker <wjhns174(a)hardakers.net> - 2.2.1-2
- add Mail::Send
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1381613 - dnssec-tools-2.2-3.fc26 FTBFS: 'NS_ALG_MD5RSA' undeclared here (not in a function)
https://bugzilla.redhat.com/show_bug.cgi?id=1381613
--------------------------------------------------------------------------------
================================================================================
erlang-webmachine-1.10.9-1.fc29 (FEDORA-2018-570c44b81f)
A REST-based system for building web applications
--------------------------------------------------------------------------------
Update Information:
* Webmachine ver. 1.10.9
--------------------------------------------------------------------------------
ChangeLog:
* Fri Aug 31 2018 Peter Lemenkov <lemenkov(a)gmail.com> - 1.10.9-1
- Ver. 1.10.9
* Fri Jul 13 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 1.10.8-15
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1603928 - erlang-webmachine: FTBFS in Fedora rawhide
https://bugzilla.redhat.com/show_bug.cgi?id=1603928
[ 2 ] Bug #1580995 - erlang-webmachine-1.10.9 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1580995
--------------------------------------------------------------------------------
================================================================================
fbreader-0.99.4-2.fc29 (FEDORA-2018-3d89ee9c09)
E-book reader
--------------------------------------------------------------------------------
Update Information:
Updates to latest fbreader; simplify packaging now that only one GUI toolkit is
supported
--------------------------------------------------------------------------------
ChangeLog:
* Thu Aug 30 2018 Michel Alexandre Salim <salimma(a)fedoraproject.org> - 0.99.4-2
- Exclude building on armv7hl (bz #1624218)
* Wed Aug 29 2018 Michel Alexandre Salim <salimma(a)fedoraproject.org> - 0.99.4-1
- Update to 0.99.4
- Obsolete zlibrary-ui-{gtk,qt} - only Qt4 is supported now
* Fri Jul 13 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 0.12.10-24
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Wed Feb 7 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 0.12.10-23
- Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild
* Wed Aug 2 2017 Fedora Release Engineering <releng(a)fedoraproject.org> - 0.12.10-22
- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Binutils_Mass_Rebuild
* Wed Jul 26 2017 Fedora Release Engineering <releng(a)fedoraproject.org> - 0.12.10-21
- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Mass_Rebuild
* Fri Feb 10 2017 Fedora Release Engineering <releng(a)fedoraproject.org> - 0.12.10-20
- Rebuilt for https://fedoraproject.org/wiki/Fedora_26_Mass_Rebuild
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1603949 - fbreader: FTBFS in Fedora rawhide
https://bugzilla.redhat.com/show_bug.cgi?id=1603949
--------------------------------------------------------------------------------
================================================================================
fldigi-4.0.18-1.fc29 (FEDORA-2018-b667c79222)
Digital modem program for Linux
--------------------------------------------------------------------------------
Update Information:
Version 4.0.18 * maintenance release CPS testing * Fixed broken test
routines ipv6 addressing * Force socket to open IPv4 address when dns
returns both IPv6 and IPv4 addresses. MT63 centering * Modify MT63
to lock "center" of tone sequence to 1500 Hz in audio passband. Request
make by SHARES. fsq mods * Mods submitted by Mike Smith, N4VLF -
add 1.5 baud - increase Rx averaging to 15 - add time stamp to
monitor text * modify # parser to replace slash character in fname with a
period Hamlib bug fix * submitted by Darrin, KA2ZLZ * rig_cmp
function being passed to std::sort in src/rigcontrol/hamlib.cxx was
returning true if the items are equal Tooltip * Fix 8PSK short preamble
tooltip nanoIO * changes dictated by new revision of nanoIO sketch
IFKP/THOR greyscale image * Add grey scale image transfer via macro call
- auto scales to one of the following . 59x74 color/greyscale
. 160x120 color/greyscale . 240x224 color/greyscale . 640x480
color/greyscale . 240x300 color/greyscale . 120x150
color/greyscale - macro usage: . <IMAGE:G,[fname]> greyscale
. <IMAGE:[fname]> color THROB adif * Change THROB adif logging to THRB,
THRBX without reference to speed RigCAT dialog * Change label on TIO
restore - current label easily confused with saving the startup state of
the transceiver.
--------------------------------------------------------------------------------
ChangeLog:
* Thu Aug 30 2018 Richard Shaw <hobbes1069(a)gmail.com> - 4.0.18-1
- Update to 4.0.18.
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1615651 - fldigi-4.0.18 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1615651
--------------------------------------------------------------------------------
================================================================================
fmt-3.0.2-7.fc29 (FEDORA-2018-b240fc3260)
Small, safe and fast formatting library for C++
--------------------------------------------------------------------------------
Update Information:
- Fix build issue
--------------------------------------------------------------------------------
ChangeLog:
* Fri Aug 31 2018 Leigh Scott <leigh123linux(a)googlemail.com> - 3.0.2-7
- Fix python2 issue for doc
* Fri Jul 13 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 3.0.2-6
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1603988 - fmt: FTBFS in Fedora rawhide
https://bugzilla.redhat.com/show_bug.cgi?id=1603988
--------------------------------------------------------------------------------
================================================================================
grub2-2.02-52.fc29 (FEDORA-2018-2756e3a374)
Bootloader with support for Linux, Multiboot and more
--------------------------------------------------------------------------------
Update Information:
Fix for aarch64 booting on some platforms, as well as loading of large initramfs
images on x86_64 and aarch64.
--------------------------------------------------------------------------------
ChangeLog:
* Thu Aug 30 2018 Peter Jones <pjones(a)redhat.com> - 2.02-52
- Fix AArch64 machines with no RAM latched lower than 1GB
Resolves: rhbz#1615969
- Set http_path and http_url when HTTP booting
- Hopefully slightly better error reporting in some cases
- Better allocation of kernel+initramfs on x86_64 and aarch64
Resolves: rhbz#1572126
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1572126 - allocation errors with secureboot grub version
https://bugzilla.redhat.com/show_bug.cgi?id=1572126
[ 2 ] Bug #1615969 - AArch64 - Error when booting "error: out of memory."
https://bugzilla.redhat.com/show_bug.cgi?id=1615969
--------------------------------------------------------------------------------
================================================================================
iniparser-4.0-7.20160821git.fc29 (FEDORA-2018-7652b51cc6)
C library for parsing "INI-style" files
--------------------------------------------------------------------------------
Update Information:
Security fix for BZ#1545825
--------------------------------------------------------------------------------
ChangeLog:
* Fri Aug 31 2018 Robin Lee <cheeselee(a)fedoraproject.org> - 4.0-7.20160821git
- Backport fix for BZ#1545825
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1545824 - iniparser: stack-buffer-underflow in iniparser_load in iniparser.c
https://bugzilla.redhat.com/show_bug.cgi?id=1545824
--------------------------------------------------------------------------------
================================================================================
iproute-4.18.0-3.fc29 (FEDORA-2018-c608864ba9)
Advanced IP routing and network device configuration tools
--------------------------------------------------------------------------------
Update Information:
iprule: Fix destination prefix output
--------------------------------------------------------------------------------
ChangeLog:
* Fri Aug 31 2018 Phil Sutter <psutter(a)redhat.com> - 4.18.0-3
- iprule: Fix destination prefix output
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1623488 - ip-rule report output is adding a space between the network address and the netmast
https://bugzilla.redhat.com/show_bug.cgi?id=1623488
--------------------------------------------------------------------------------
================================================================================
js-jsroot-5.5.1-1.fc29 (FEDORA-2018-6c01fcf930)
JavaScript ROOT - Interactive numerical data analysis graphics
--------------------------------------------------------------------------------
Update Information:
https://github.com/root-project/jsroot/blob/5.5.1/changes.md
--------------------------------------------------------------------------------
ChangeLog:
* Thu Aug 30 2018 Mattias Ellert <mattias.ellert(a)physics.uu.se> - 5.5.1-1
- Update to version 5.5.1
--------------------------------------------------------------------------------
================================================================================
libcacard-2.6.1-1.fc29 (FEDORA-2018-8b6397ee0d)
CAC (Common Access Card) library
--------------------------------------------------------------------------------
Update Information:
Update to new upstream release
--------------------------------------------------------------------------------
ChangeLog:
* Fri Aug 31 2018 Christophe Fergeau <cfergeau(a)redhat.com> - 2.6.1-1
- Update to new upstream release
--------------------------------------------------------------------------------
================================================================================
libs3-4.1-0.1.20180821gita4d873f.fc29 (FEDORA-2018-88efb35f6f)
C Library and Tools for Amazon S3 Access
--------------------------------------------------------------------------------
Update Information:
libs3 4.1.
--------------------------------------------------------------------------------
ChangeLog:
* Fri Aug 31 2018 Mattias Ellert <mattias.ellert(a)physics.uu.se> - 4.1-0.1.20180821gita4d873f
- New github snapshot
--------------------------------------------------------------------------------
================================================================================
mingw-libarchive-3.3.2-1.fc29 (FEDORA-2018-e808977e4f)
MinGW package for handling streaming archive formats
--------------------------------------------------------------------------------
Update Information:
3.3.2 update
--------------------------------------------------------------------------------
ChangeLog:
* Fri Aug 24 2018 Christophe Fergeau <cfergeau(a)redhat.com> - 3.3.2-1
- Update to 3.3.2
* Fri Aug 24 2018 Richard W.M. Jones <rjones(a)redhat.com> - 3.3.1-5
- Rebuild for new mingw-openssl.
--------------------------------------------------------------------------------
================================================================================
nettle-3.4-5.fc29 (FEDORA-2018-a1e529f355)
A low-level cryptographic library
--------------------------------------------------------------------------------
Update Information:
- Fix build issue
--------------------------------------------------------------------------------
ChangeLog:
* Fri Aug 31 2018 Leigh Scott <leigh123linux(a)googlemail.com> - 3.4-5
- update libary versions used for fips
* Sat Jul 28 2018 Igor Gnatenko <ignatenkobrain(a)fedoraproject.org> - 3.4-4
- Replace obsolete scriptlets
* Fri Jul 13 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 3.4-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1604950 - nettle: FTBFS in Fedora rawhide
https://bugzilla.redhat.com/show_bug.cgi?id=1604950
--------------------------------------------------------------------------------
================================================================================
nodejs-discord-js-11.4.2-1.fc29 (FEDORA-2018-8923da7292)
Powerful JavaScript library for interacting with the Discord API
--------------------------------------------------------------------------------
Update Information:
Initial package.
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1622625 - Review Request: nodejs-discord-js - Powerful JavaScript library for interacting with the Discord API
https://bugzilla.redhat.com/show_bug.cgi?id=1622625
--------------------------------------------------------------------------------
================================================================================
nodejs-irc-upd-0.10.0-2.fc29 (FEDORA-2018-334cbfefe8)
NodeJS IRC client library
--------------------------------------------------------------------------------
Update Information:
Initial package.
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1622690 - Review Request: nodejs-irc-upd - NodeJS IRC client library
https://bugzilla.redhat.com/show_bug.cgi?id=1622690
--------------------------------------------------------------------------------
================================================================================
nodejs-tweetnacl-1.0.0-1.fc29 (FEDORA-2018-079b310aca)
Port of TweetNaCl cryptographic library to JavaScript
--------------------------------------------------------------------------------
Update Information:
Initial package.
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1622619 - Review Request: nodejs-tweetnacl - Port of TweetNaCl cryptographic library to JavaScript
https://bugzilla.redhat.com/show_bug.cgi?id=1622619
--------------------------------------------------------------------------------
================================================================================
openssh-7.8p1-2.fc29 (FEDORA-2018-50a6d79d8e)
An open source implementation of SSH protocol version 2
--------------------------------------------------------------------------------
Update Information:
Fix GSSAPI issues with new release and some clean up aftere rebase
--------------------------------------------------------------------------------
ChangeLog:
* Fri Aug 31 2018 Jakub Jelen <jjelen(a)redhat.com> - 7.8p1-2 + 0.10.3-5
- New upstream release fixing CVE 2018-15473
- Remove unused patches
- Remove reference to unused enviornment variable SSH_USE_STRONG_RNG
- Address coverity issues
- Unbreak scp between two IPv6 hosts
- Unbreak GSSAPI key exchange (#1624344)
- Unbreak rekeying with GSSAPI key exchange (#1624344)
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1624344 - Rekeying on long sessions fails when using gss
https://bugzilla.redhat.com/show_bug.cgi?id=1624344
[ 2 ] Bug #1624323 - gsskex authentication causes segmentation fault
https://bugzilla.redhat.com/show_bug.cgi?id=1624323
--------------------------------------------------------------------------------
================================================================================
perl-Pegex-0.65-1.fc29 (FEDORA-2018-d2cff1e5c0)
Pegex Parser Generator
--------------------------------------------------------------------------------
Update Information:
Update to 0.65
--------------------------------------------------------------------------------
ChangeLog:
* Fri Aug 31 2018 Gerd Pokorra <gp(a)zimt.uni-siegen.de> 0.65-1
- Update to 0.65
- Add dependency perl-JSON-PP
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1623848 - Upgrade perl-Pegex to 0.65
https://bugzilla.redhat.com/show_bug.cgi?id=1623848
--------------------------------------------------------------------------------
================================================================================
pypy-6.0.0-3.fc29 (FEDORA-2018-e7277abc08)
Python implementation with a Just-In-Time compiler
--------------------------------------------------------------------------------
Update Information:
Use RPM packaged wheels. Drop ppc64le support.
--------------------------------------------------------------------------------
ChangeLog:
* Tue Aug 21 2018 Miro Hron��ok <mhroncok(a)redhat.com> - 6.0.0-3
- Use RPM packaged wheels
* Fri Jul 13 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 6.0.0-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1623504 - pypy has "python" shebangs
https://bugzilla.redhat.com/show_bug.cgi?id=1623504
--------------------------------------------------------------------------------
================================================================================
python-blivet-3.1.0-2.fc29 (FEDORA-2018-85853d46b5)
A python module for system storage configuration
--------------------------------------------------------------------------------
Update Information:
Fix some ARM issues
--------------------------------------------------------------------------------
ChangeLog:
* Thu Aug 30 2018 Vojtech Trefny <vtrefny(a)redhat.com> - 3.1.0-2
- arm: add support for EFI on ARMv7 (probinson)
- Aarch64 platforms: Fix gpt defaults for 64 bit arm platforms (probinson)
- arch: arm: drop get_arm_machine function (probinson)
- arch: arm: drop omap specifics for partitioning (probinson)
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1544962 - AArch64 EFI systems default to MBR rather than GPT partitioning
https://bugzilla.redhat.com/show_bug.cgi?id=1544962
--------------------------------------------------------------------------------
================================================================================
python-llfuse-1.3.5-1.fc29 (FEDORA-2018-ffd0bce893)
Python Bindings for the low-level FUSE API
--------------------------------------------------------------------------------
Update Information:
Release 1.3.5 (2018-08-30) --- - Add `handle_signals` option to llfuse.main -
Several fixes to examples/passthroughfs.py - Now compatible with Python 3.7
--------------------------------------------------------------------------------
ChangeLog:
* Thu Aug 30 2018 Denis Fateyev <denis(a)fateyev.com> - 1.3.5-1
- Update to 1.3.5 release
* Sat Jul 14 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 1.3.3-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Tue Jun 19 2018 Miro Hron��ok <mhroncok(a)redhat.com> - 1.3.3-2
- Rebuilt for Python 3.7
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1605754 - python-llfuse: FTBFS in Fedora rawhide
https://bugzilla.redhat.com/show_bug.cgi?id=1605754
[ 2 ] Bug #1574032 - python-llfuse-1.3.4 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1574032
--------------------------------------------------------------------------------
================================================================================
python2-2.7.15-8.fc29 (FEDORA-2018-2ef46486ba)
An interpreted, interactive, object-oriented programming language
--------------------------------------------------------------------------------
Update Information:
Require python2-setuptools from python2-devel to prevent packaging errors
--------------------------------------------------------------------------------
ChangeLog:
* Thu Aug 30 2018 Miro Hron��ok <mhroncok(a)redhat.com> - 2.7.15-8
- Require python2-setuptools from python2-devel to prevent packaging errors (#1623922)
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1623922 - python2-devel should require python2-setuptools to prevent packaging errors
https://bugzilla.redhat.com/show_bug.cgi?id=1623922
--------------------------------------------------------------------------------
================================================================================
python3-3.7.0-9.fc29 (FEDORA-2018-256cf902f7)
Interpreter of the Python programming language
--------------------------------------------------------------------------------
Update Information:
Require python3-setuptools from python3-devel to prevent packaging errors
--------------------------------------------------------------------------------
ChangeLog:
* Thu Aug 30 2018 Miro Hron��ok <mhroncok(a)redhat.com> - 3.7.0-9
- Require python3-setuptools from python3-devel to prevent packaging errors (#1623914)
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1623914 - python3-devel should require python3-setuptools to prevent packaging errors
https://bugzilla.redhat.com/show_bug.cgi?id=1623914
--------------------------------------------------------------------------------
================================================================================
speech-tools-2.5-6.fc29 (FEDORA-2018-323ef6ef6b)
Edinburgh speech tools library
--------------------------------------------------------------------------------
Update Information:
This brings a prereqisite of the festival update to f29. Even if the festival
package will not for some reason be accepted, this at least makes some recent
Edinburgh speech tools available.
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1592208 - Changes/Update festival to 2.5
https://bugzilla.redhat.com/show_bug.cgi?id=1592208
--------------------------------------------------------------------------------
================================================================================
virtualbox-guest-additions-5.2.18-1.fc29 (FEDORA-2018-46347737e2)
VirtualBox Guest Additions
--------------------------------------------------------------------------------
Update Information:
Update Virtualbox Guest Additions to 5.2.18
--------------------------------------------------------------------------------
ChangeLog:
* Thu Aug 30 2018 S��rgio Basto <sergio(a)serjux.com> - 5.2.18-1
- Update Virtualbox Guest Additions to 5.2.18
--------------------------------------------------------------------------------
11 months, 3 weeks
- 1
- 0