rawhide report: 20050606 changes
by Build System
Updated Packages:
VFlib2-2.25.6-29
----------------
* Mon Jun 06 2005 Akira TAGOH <tagoh(a)redhat.com> - 2.25.6-29
- convert a spec file to UTF-8. (#159577)
arts-8:1.4.1-1
--------------
* Mon Jun 06 2005 Than Ngo <than(a)redhat.com> 8:1.4.1-1
- 1.4.1
iiimf-le-xcin-0.1.10-2
----------------------
* Mon Jun 06 2005 Leon Ho <llch(a)redhat.com> - 0.1.10-2
- requires > iiimf-server-12.2-1
- fix key accelerations (RH#154789)
* Thu Apr 07 2005 Jens Petersen <petersen(a)redhat.com>
- update %sendhup to signal iiimd
joe-3.3-1
---------
* Mon Jun 06 2005 Ivana Varekova <varekova(a)redhat.com> 3.3-1
- new upstream version
net-tools-1.60-53
-----------------
* Mon Jun 06 2005 Radek Vokal <rvokal(a)redhat.com> 1.60-53
- etherwake man page changed to ether-wake (#159156)
spamassassin-3.0.4-1.fc5
------------------------
* Sun Jun 05 2005 Warren Togami <wtogami(a)redhat.com> - 3.0.4-1
- 3.0.4
19 years
kernel source - building module (troubles)
by Terry
I am attempting to follow the release notes so that I can install my cisco
vpn client. The release notes state that "an exploded source tree is not
required to build kernel modules against the currently in-use kernel". It
goes on to say to use a Makefile that points to the KDIR of
"/lib/modules/$(shell uname -r)/build". Here is some information about my
environment:
[root@linux vpnclient]# rpm -q kernel
kernel-2.6.11-1.1369_FC4
[root@linux ~]# ls -l /lib/modules/2.6.11-1.1369_FC4/
total 1044
lrwxrwxrwx 1 root root 47 Jun 5 20:57 build ->
../../../usr/src/kernels/2.6.11-1.1369_FC4-i686
drwxr-xr-x 9 root root 4096 Jun 2 22:04 kernel
-rw-r--r-- 1 root root 194071 Jun 5 20:57 modules.alias
-rw-r--r-- 1 root root 69 Jun 5 20:57 modules.ccwmap
-rw-r--r-- 1 root root 233753 Jun 5 20:57 modules.dep
-rw-r--r-- 1 root root 813 Jun 5 20:57 modules.ieee1394map
-rw-r--r-- 1 root root 357 Jun 5 20:57 modules.inputmap
-rw-r--r-- 1 root root 16284 Jun 5 20:57 modules.isapnpmap
-rw-r--r-- 1 root root 168631 Jun 5 20:57 modules.pcimap
-rw-r--r-- 1 root root 89252 Jun 5 20:57 modules.symbols
-rw-r--r-- 1 root root 267888 Jun 5 20:57 modules.usbmap
lrwxrwxrwx 1 root root 5 Jun 5 20:57 source -> build
Why is the build symlink pointing to that directory? Its a broken symlink.
What am I missing?
19 years
cannot startx as a user after yum upgrade
by Mick M.
Hello;
I am running FC4 Test.
I upgraded last night, a lot of it was xwindow stuff.
Now I cannot 'startx' as a user:
----------------------------------------------------------------
xauth: timeout in locking authority files /home/mick/.Xauthority
Fatal server error:
Cannot move old log file
("/var/log/Xorg.0.log" to "/var/log/Xorg.0.log.old"
----------------------------------------------------------------
(This was written down and typed in, right now I am in FC2.)
I can 'startx' as root.
I deleted the user mick and the home directory.
Then recreated it.
Also as a diferent user.
Same thing
thanks
Mick M.
Dogs have Masters - Siamese Cats have Staff!
__________________________________
Discover Yahoo!
Have fun online with music videos, cool games, IM and more. Check it out!
http://discover.yahoo.com/online.html
19 years
unable to yum update on freshly installed x86_64 FC4T3
by Dan Hollis
This is a fresh 'install everything' FC4T3 install, absolutely nothing
changed from default install.
# yum clean all
[...]
# yum update
[...]
--> Running transaction check
--> Processing Dependency: libijs.so()(64bit) for package: gimp-print
--> Processing Dependency: mozilla-nss = 37:1.7.7-3 for package: mozilla
--> Processing Dependency: libgs.so.7()(64bit) for package: ImageMagick-perl
--> Processing Dependency: libgs.so.7()(64bit) for package: ImageMagick
--> Processing Conflict: python-devel conflicts python < 2.4.1-2
--> Processing Dependency: mozilla-nspr = 37:1.7.7-3 for package: mozilla
--> Processing Dependency: openoffice.org-core = 1:1.9.100-1 for package: openoffice.org-pyuno
--> Restarting Dependency Resolution with new changes.
--> Populating transaction set with selected packages. Please wait.
--> Running transaction check
--> Processing Dependency: libijs.so()(64bit) for package: gimp-print
--> Processing Dependency: mozilla-nss = 37:1.7.7-3 for package: mozilla
--> Processing Dependency: libgs.so.7()(64bit) for package: ImageMagick-perl
--> Processing Dependency: libgs.so.7()(64bit) for package: ImageMagick
--> Processing Conflict: python-devel conflicts python < 2.4.1-2
--> Processing Dependency: mozilla-nspr = 37:1.7.7-3 for package: mozilla
--> Processing Dependency: openoffice.org-core = 1:1.9.100-1 for package: openoffice.org-pyuno
--> Restarting Dependency Resolution with new changes.
--> Populating transaction set with selected packages. Please wait.
--> Running transaction check
Error: Missing Dependency: libijs.so()(64bit) is needed by package gimp-print
Error: Missing Dependency: libgs.so.7()(64bit) is needed by package ImageMagick-perl
Error: Missing Dependency: libgs.so.7()(64bit) is needed by package ImageMagick
Error: Missing Dependency: openoffice.org-core = 1:1.9.100-1 is needed by package openoffice.org-pyuno
Error: Unable to satisfy dependencies
Error: Package gimp-print needs libijs.so()(64bit), this is not available.
Error: Package mozilla needs mozilla-nss = 37:1.7.7-3, this is not available.
Error: Package ImageMagick-perl needs libgs.so.7()(64bit), this is not available.
Error: Package ImageMagick needs libgs.so.7()(64bit), this is not available.
Error: Package python-devel needs python < 2.4.1-2, this is not available.
Error: Package mozilla needs mozilla-nspr = 37:1.7.7-3, this is not available.
Error: Package openoffice.org-pyuno needs openoffice.org-core = 1:1.9.100-1, this is not available.
19 years
FC4T3 install: boot fail after install onto reiserfs
by Richard Michael
Three times today on different hardware (changing hard drives and
architecture), I have attempted to install FC4 Test 3 onto a single
partition reiserfs system, hda1 (10GB) = reiserfs, hda2 (1024MB) = swap.
To launch the install, I used "linux selinux=0 reiserfs".
The install proceeds normally, but during the initial reboot, the system
halts when uncompressing the kernel and reports:
-----
<snip boot loader messages>
Uncompressing Linux...
ran out of input data
-- System halted
-----
I might expect a bad hard drive, but, as I mentioned, this happens on
two different drives, in two different systems.
Does anyone know what's happening?
Apologies if this is answered somewhere already.
Thanks,
Richard
19 years
up2date now working
by Ian Puleston
Hi,
Having just updated everything, up2date is not now working, although I
can get updates via yum OK. up2date gives the following error:
There was a fatal error communicating with the server. The message was:
An HTTP error occurred:
URL:
http://mirrors.kernel.org/fedora/core/development/i386//headers/header.info
Status Code: 404
Error Message: Not Found
Looking at that server, there is no headers directory under i386. Does
some configuration need changing somewhere?
Ian
19 years
Re: rawhide report: 20050604 changes
by Horst H. von Brand
Neal Becker <ndbecker2(a)gmail.com> wrote:
> Error: Missing Dependency: libijs.so()(64bit) is needed by package
> gimp-print
> Error: Missing Dependency: libgs.so.7()(64bit) is needed by package
> ImageMagick-perl
> Error: Missing Dependency: libgs.so.7()(64bit) is needed by package
> ImageMagick
> [nbecker@nbecker ~]$ sudo yum --exclude=ghostscript* upgrade
> [Now updates OK]
Same for i386 here.
--
Dr. Horst H. von Brand User #22616 counter.li.org
Departamento de Informatica Fono: +56 32 654431
Universidad Tecnica Federico Santa Maria +56 32 654239
Casilla 110-V, Valparaiso, Chile Fax: +56 32 797513
19 years
Can't seem to file BZ record
by Wayne Johnson
I tried to file a BZ record for an error I'm getting with yum update. After hitting submit, I get a about:blank page, but I don't see my records out there. Cockpit error or is there a problem somewhere?
The BZ was about the error:
Error: Missing Dependency: libijs.so()(64bit) is needed by package gimp-print
When attempting to update a fc4test3 system.
---
Wayne Johnson, | There are two kinds of people: Those
3943 Penn Ave. N. | who say to God, "Thy will be done,"
Minneapolis, MN 55412-1908 | and those to whom God says, "All right,
(612) 522-7003 | then, have it your way." --C.S. Lewis
---------------------------------
Discover Yahoo!
Stay in touch with email, IM, photo sharing & more. Check it out!
19 years
linksys usb 2.6 bug?
by Ussama Baggili
Hi,
I am a new-b and I have been trying to use Fedora on my desktop since
Fedora 3. As my access to the internet is only through my Linksys USB
v2.6 wireless device, it has become my only point of reference when
trying to work with Fedora. I'm not a developer, nor am I familiar
with rebuilding kernels, but I do find a lot of search results on the
internet trying to provide solutions.
I guess what I would like to ask for is either for a bug to be filed
with bugzilla to get this fixed, or for guidance. In Fedora core 4
test 3, the hardware is discovered when I plug in the device and browse
hardware. It is correctly identified, although no driver is
associated. In the network configuration, it is not listed as an item,
nor does lsmod show anything related to the device (as far as I know).
Please advise or help! I'm writing to the list per instructions to
file bugs or suggestions per Fedora's installer and OS. I would really
like to get on board.
Thanks,
-Ussama
Jinsys Inc
19 years
Installing xen guest via iso/cd
by Justin Conover
I use rawhide on my work laptop and currently use vmware with rhas 2.1
and 3 as guest for building packages and testing different things.
Would Xen be a better fit, I've read the vairous how-to's out there
for xen on fedora and have played around with it on another test box.
Is it possible to use centos2.1/3 iso's for the guest install?
19 years
