many thanks. I could gather these information to you
1- [root@ava nasim]# lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset
Integrated Graphics Controller (rev 03)
01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan
[Mobility Radeon HD 5430 Series]
2- [root@ava nasim]# lspci -nv | grep VGA
00:02.0 0300: 8086:2e32 (rev 03) (prog-if 00 [VGA controller])
01:00.0 0300: 1002:68e1 (prog-if 00 [VGA controller])
3- [root@ava nasim]# grep -E 'Manufacturer:|Year:' /var/log/Xorg.0.log \
| sed '/Serial/s/.....$//'
[ 31.832] (II)
RADEON(0): Manufacturer: GSM Model: 4432 Serial#:
[ 31.832] (II) RADEON(0): Year: 2009 Week: 33
[root@ava nasim]#
4- Yes each monitor works when in BIOS the initial card is set to that
of that monitor.
5- These are relevant parts of xorg.0.log:
[ 31.189] (--) PCI: (0:0:2:0) 8086:2e32:1458:d000 rev 3, Mem @
0xfd800000/4194304, 0xd0000000/268435456, I/O @ 0x0000ff00/8, BIOS @
0x????????/65536
[ 31.189] (--) PCI:*(0:1:0:0) 1002:68e1:1787:3000 rev 0, Mem @
0xc0000000/268435456, 0xfddc0000/131072, I/O @ 0x0000ce00/256, BIOS @
0x????????/131072
[ 32.686] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 32.686] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 32.686] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 32.686] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 32.687] (II) AIGLX: Loaded and initialized r600
[ 32.687] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 32.704] (II) RADEON(0): Setting screen physical size to 338 x 270
33.444] (II) config/udev: Adding input device HDA Intel Front
Headphone (/dev/input/event10)
[ 33.444] (II) No input driver specified, ignoring this device.
[ 33.444] (II) This device may have been added with another device file.
[ 33.445] (II) config/udev: Adding input device HDA Intel Line Out
(/dev/input/event11)
[ 33.445] (II) No input driver specified, ignoring this device.
[ 33.445] (II) This device may have been added with another device file.
[ 33.451] (II) config/udev: Adding input device HDA Intel Line
(/dev/input/event7)
[ 33.451] (II) No input driver specified, ignoring this device.
[ 33.451] (II) This device may have been added with another device file.
[ 33.452] (II) config/udev: Adding input device HDA Intel Rear Mic
(/dev/input/event8)
[ 33.452] (II) No input driver specified, ignoring this device.
[ 33.452] (II) This device may have been added with another device file.
[ 33.458] (II) config/udev: Adding input device HDA Intel Front Mic
(/dev/input/event9)
[ 33.458] (II) No input driver specified, ignoring this device.
[ 33.458] (II) This device may have been added with another device file.
6- BIOS gives these options: intel onboard: always enable
enable if no PCI card
initial diplay : onboard
pci
PEG : disable/paranoid
regards
On 6/25/12, John Reiser <jreiser(a)bitwagon.com> wrote:
>> I want to set non-plugable multiseat under fedora 17. i get
the error
>> " no valid EDID" on one of the two monitors. I get this Error on LG
>> and SAMSUNG LCD monitors. Changing NVIIDA graphic card to ATI Radeon
>> was of mo use. the other card is INTEL on board.
https://bugs.freedesktop.org/show_bug.cgi?id=51012
--
--
test mailing list
test(a)lists.fedoraproject.org
To unsubscribe:
https://admin.fedoraproject.org/mailman/listinfo/test