1:42 p.m.
Specifically, the following packages do not currently work:
s-c-boot
s-c-firewall (opens window frame and then hangs)
s-c-printer (starts defining new printer and then hangs)
s-c-selinux (msg and then craps out)
s-c-user (missing domain definition .. bugzilla'ed)
Gene
1:43 p.m.
Gene Czarcinski on 09/02/2009 01:42 PM wrote:
Specifically, the following packages do not currently work:
s-c-boot
s-c-firewall (opens window frame and then hangs)
s-c-printer (starts defining new printer and then hangs)
s-c-selinux (msg and then craps out)
s-c-user (missing domain definition .. bugzilla'ed)
Do you have the assistive technologies stuff enabled?
System>Preferences>Technologies
2:19 p.m.
On Wednesday 02 September 2009 14:43:35 Michael Cronenworth wrote:
Gene Czarcinski on 09/02/2009 01:42 PM wrote:
> Specifically, the following packages do not currently work:
>
> s-c-boot
> s-c-firewall (opens window frame and then hangs)
> s-c-printer (starts defining new printer and then hangs)
> s-c-selinux (msg and then craps out)
> s-c-user (missing domain definition .. bugzilla'ed)
Do you have the assistive technologies stuff enabled?
System>Preferences>Technologies
Yes, as a matter of fact I do ... must be the default on F12 since it is not
enabled on F11.
Update:
s-c-boot: bugzilla 520887
s-c-firewall: bugzilla 520883
s-c-printer: bugzilla 520885
s-c-selinux (policycoreutils package) .. not a bug (sort of) .. it does start
... on F11 starting takes about 15 seconds; on F12 starting takes over a
minute and locks up a processor 100%
I tried disabling the assistive technologies ... no change.
Gene
2:22 p.m.
On Wednesday 02 September 2009 15:19:13 Gene Czarcinski wrote:
On Wednesday 02 September 2009 14:43:35 Michael Cronenworth wrote:
> Gene Czarcinski on 09/02/2009 01:42 PM wrote:
> > Specifically, the following packages do not currently work:
> >
> > s-c-boot
> > s-c-firewall (opens window frame and then hangs)
> > s-c-printer (starts defining new printer and then hangs)
> > s-c-selinux (msg and then craps out)
> > s-c-user (missing domain definition .. bugzilla'ed)
>
> Do you have the assistive technologies stuff enabled?
> System>Preferences>Technologies
Yes, as a matter of fact I do ... must be the default on F12 since it is
not enabled on F11.
Update:
s-c-boot: bugzilla 520887
s-c-firewall: bugzilla 520883
s-c-printer: bugzilla 520885
s-c-selinux (policycoreutils package) .. not a bug (sort of) .. it does
start ... on F11 starting takes about 15 seconds; on F12 starting takes
over a minute and locks up a processor 100%
I tried disabling the assistive technologies ... no change.
I would appreciate it if someone else also on F12-alpha+current_rawhide would
give these a try.
Gene
2:31 p.m.
On Wed, Sep 2, 2009 at 12:22 PM, Gene Czarcinski<gene(a)czarc.net> wrote:
On Wednesday 02 September 2009 15:19:13 Gene Czarcinski wrote:
> On Wednesday 02 September 2009 14:43:35 Michael Cronenworth wrote:
> > Gene Czarcinski on 09/02/2009 01:42 PM wrote:
> > > Specifically, the following packages do not currently work:
> > >
> > > s-c-boot
> > > s-c-firewall (opens window frame and then hangs)
> > > s-c-printer (starts defining new printer and then hangs)
> > > s-c-selinux (msg and then craps out)
> > > s-c-user (missing domain definition .. bugzilla'ed)
> >
> > Do you have the assistive technologies stuff enabled?
> > System>Preferences>Technologies
>
> Yes, as a matter of fact I do ... must be the default on F12 since it is
> not enabled on F11.
>
> Update:
> s-c-boot: bugzilla 520887
> s-c-firewall: bugzilla 520883
> s-c-printer: bugzilla 520885
> s-c-selinux (policycoreutils package) .. not a bug (sort of) .. it does
> start ... on F11 starting takes about 15 seconds; on F12 starting takes
> over a minute and locks up a processor 100%
>
> I tried disabling the assistive technologies ... no change.
I would appreciate it if someone else also on F12-alpha+current_rawhide would
give these a try.
Gene
--
I'm running latest rawhide and system-config-printer "works for me":
complains about not finding libgnomebreakpad.so, but starts up.
system-config-firewall also complains about gnomebreakpad, then
prompts for root password, and then displays a grayed out window while
eating up 100% of CPU:
[root@tlondon ~]# ps algx | grep firewall
0 500 10239 1913 20 0 288124 13184 poll_s Sl+ pts/1 0:00
system-config-firewall
4 0 10240 10239 20 0 145368 2372 wait S+ pts/1 0:00
/usr/sbin/userhelper -w system-config-firewall
4 0 10249 10240 20 0 464624 46552 - R+ pts/1 1:32
/usr/bin/python
/usr/share/system-config-firewall/system-config-firewall.py
0 0 10267 2285 20 0 89080 856 pipe_w S+ pts/0 0:00
grep firewall
[root@tlondon ~]#
I killed the window after about 3-4 minutes of elapsed time.
tom
--
Tom London
3:12 p.m.
On Wednesday 02 September 2009 15:31:52 Tom London wrote:
On Wed, Sep 2, 2009 at 12:22 PM, Gene
Czarcinski<gene(a)czarc.net> wrote:
> On Wednesday 02 September 2009 15:19:13 Gene Czarcinski wrote:
>> On Wednesday 02 September 2009 14:43:35 Michael Cronenworth wrote:
>> > Gene Czarcinski on 09/02/2009 01:42 PM wrote:
>> > > Specifically, the following packages do not currently work:
>> > >
>> > > s-c-boot
>> > > s-c-firewall (opens window frame and then hangs)
>> > > s-c-printer (starts defining new printer and then hangs)
>> > > s-c-selinux (msg and then craps out)
>> > > s-c-user (missing domain definition .. bugzilla'ed)
>> >
>> > Do you have the assistive technologies stuff enabled?
>> > System>Preferences>Technologies
>>
>> Yes, as a matter of fact I do ... must be the default on F12 since it is
>> not enabled on F11.
>>
>> Update:
>> s-c-boot: bugzilla 520887
>> s-c-firewall: bugzilla 520883
>> s-c-printer: bugzilla 520885
>> s-c-selinux (policycoreutils package) .. not a bug (sort of) .. it does
>> start ... on F11 starting takes about 15 seconds; on F12 starting takes
>> over a minute and locks up a processor 100%
>>
>> I tried disabling the assistive technologies ... no change.
>
> I would appreciate it if someone else also on F12-alpha+current_rawhide
> would give these a try.
>
> Gene
>
> --
I'm running latest rawhide and system-config-printer "works for me":
complains about not finding libgnomebreakpad.so, but starts up.
Another problem
when I just did not wait long enough. When I just sat there
and waited, it finally worked OK (bugzilla report closed).
For one jetdirect printer on same subnet as my host, it was pretty quick but
for another jetdirect printer on a separate (wireless) subnet, it took a
while.
system-config-firewall also complains about gnomebreakpad, then
prompts for root password, and then displays a grayed out window while
eating up 100% of CPU:
[root@tlondon ~]# ps algx | grep firewall
0 500 10239 1913 20 0 288124 13184 poll_s Sl+ pts/1 0:00
system-config-firewall
4 0 10240 10239 20 0 145368 2372 wait S+ pts/1 0:00
/usr/sbin/userhelper -w system-config-firewall
4 0 10249 10240 20 0 464624 46552 - R+ pts/1 1:32
/usr/bin/python
/usr/share/system-config-firewall/system-config-firewall.py
0 0 10267 2285 20 0 89080 856 pipe_w S+ pts/0 0:00
grep firewall
[root@tlondon ~]#
I killed the window after about 3-4 minutes of elapsed time.
I am su'ing to root and invoking s-c-f from the command line so I have not
seen the prompt for root's password but other than that, it is the same.
I just did the same new printer definitions on a F11 system and it was a lot
"faster" as compared to doing it on a F12 system. I am not sure what is going
on but there is something adding delay (using CPU time) on F12 as compared to
F11 for both s-c-printer and s-c-selinux.
Gene
5:50 a.m.
On Wed, 2009-09-02 at 16:12 -0400, Gene Czarcinski wrote:
I just did the same new printer definitions on a F11 system and it
was a lot
"faster" as compared to doing it on a F12 system. I am not sure what is going
on but there is something adding delay (using CPU time) on F12 as compared to
F11 for both s-c-printer and s-c-selinux.
Was the Fedora 11 system fully updated? Fedora 11 shipped with a CUPS
lacking the dnssd backend which runs until the timeout expires (default
10 seconds). Without that backend present it would certainly be faster
to gather the list of available devices.
In other words, which cups package was installed on the Fedora 11 system
you tested?
I measured 11s for this operation on both Fedora 11 and rawhide.
Tim.
*/
3:08 p.m.
On Wed, Sep 2, 2009 at 12:35 PM, Michael Cronenworth<mike(a)cchtml.com> wrote:
Gene Czarcinski on 09/02/2009 02:19 PM wrote:
>
> I tried disabling the assistive technologies ... no change.
>
You must logout/login after disabling it. Did you? I'm just making sure
it's not bug 486605.
--
Thanks. logging out/in after disabling AT, and now
system-config-firewall "works".
tom
--
Tom London
3:22 p.m.
On Wednesday 02 September 2009 16:08:37 Tom London wrote:
On Wed, Sep 2, 2009 at 12:35 PM, Michael
Cronenworth<mike(a)cchtml.com> wrote:
> Gene Czarcinski on 09/02/2009 02:19 PM wrote:
>> I tried disabling the assistive technologies ... no change.
>
> You must logout/login after disabling it. Did you? I'm just making sure
> it's not bug 486605.
Stange ... I did not get an email with the above text!
>
> --
Thanks. logging out/in after disabling AT, and now
system-config-firewall "works".
Anyway, logging out and then back in after disabling AT and s-c-firewall now
works ... I will close my bug report.
BTW, s-c-boot still broken.
And, s-c-selinux is now coming up much faster (about 15 seconds versus over a
minute).
Gene
5374
days inactive
5375
days old
9 comments
4 participants
participants (4)
-
Gene Czarcinski -
Michael Cronenworth -
Tim Waugh -
Tom London