12:55 p.m.
I am running rawhide.
I just noticed that the usb flashdrive does not get mounted, or
anything. It is because none of the modules are loaded for usb storage.
I do not know which system this would apply to. HAL? HOTPLUG?
initscripts?
This was working until a week or so ago. I know its a bit vague, but I
didn't test for every update. Its just when I used it last, it worked
with out all of the modprobe stuff. I have to do the following dance to
get the flashdrive to be mounted.
[bpm]$ sudo modprobe usb-ohci
[bpm]$ sudo modprobe uhci-hcd
[bpm]$ sudo modprobe ehci-hcd
[bpm]$ sudo modprobe scsi-mod
[bpm]$ sudo modprobe usb-storage
I know I can put this in rc.local & other places, but what behavior
changed?
Thanks.
--
Brian Millett - [ Ivanova, "Midnight on the Firing Line"]
"Commander, there's a problem."
2:37 p.m.
On Tue, 25 Jan 2005 12:55:58 -0600, Brian Millett <bpm(a)ec-group.com> wrote:
I am running rawhide.
I just noticed that the usb flashdrive does not get mounted, or
anything. It is because none of the modules are loaded for usb storage.
I do not know which system this would apply to. HAL? HOTPLUG?
initscripts?
udev
-jef
3:06 p.m.
On Tue, 2005-01-25 at 15:37 -0500, Jeff Spaleta wrote:
On Tue, 25 Jan 2005 12:55:58 -0600, Brian Millett
<bpm(a)ec-group.com> wrote:
> I am running rawhide.
> I just noticed that the usb flashdrive does not get mounted, or
> anything. It is because none of the modules are loaded for usb storage.
> I do not know which system this would apply to. HAL? HOTPLUG?
> initscripts?
udev
-jef
Thanks Jef,
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=146189
I guess it is 'Jef' not the 'Jeff' from the email?
--
Brian Millett - [ Jha'dur (to Sinclair), "Deathwalker"]
"The Wind Swords said you were sentimental...a fatal flaw in a warrior."
2:28 p.m.
On Tue, 2005-01-25 at 15:06 -0600, Brian Millett wrote:
> > I am running rawhide.
> > I just noticed that the usb flashdrive does not get mounted, or
> > anything. It is because none of the modules are loaded for usb storage.
> > I do not know which system this would apply to. HAL? HOTPLUG?
> > initscripts?
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=146189
The latest rawhide updates seem to have taken care of your problem. But
judging from the error you got:
Jan 25 11:52:39 localhost modprobe: WARNING: Error inserting
scsi_mod
(/lib/modules/2.6.10-1.1109_FC4/kernel/drivers/scsi/scsi_mod.ko):
Unknown symbol in module, or unknown parameter (see dmesg)
Jan 25 11:52:39 localhost kernel: scsi_mod: Unknown parameter `'
and Dave's message [1], I believe it's likely the error will pop up
again in the future. The upstream kernels got picky about module
parameters, so you might want to get rid of these warnings (which I
suppose you're still getting). I've seen cases where a single trailing
space in /etc/modprobe.conf prevented the kernel from loading a module.
[1] http://diary.codemonkey.org.uk/#20050116
--
Ziga
2:59 p.m.
On Wed, 2005-01-26 at 21:28 +0100, Ziga Mahkovec wrote:
On Tue, 2005-01-25 at 15:06 -0600, Brian Millett wrote:
> > > I am running rawhide.
> > > I just noticed that the usb flashdrive does not get mounted, or
> > > anything. It is because none of the modules are loaded for usb storage.
> > > I do not know which system this would apply to. HAL? HOTPLUG?
> > > initscripts?
>
> https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=146189
The latest rawhide updates seem to have taken care of your problem. But
judging from the error you got:
> Jan 25 11:52:39 localhost modprobe: WARNING: Error inserting scsi_mod
> (/lib/modules/2.6.10-1.1109_FC4/kernel/drivers/scsi/scsi_mod.ko):
> Unknown symbol in module, or unknown parameter (see dmesg)
> Jan 25 11:52:39 localhost kernel: scsi_mod: Unknown parameter `'
and Dave's message [1], I believe it's likely the error will pop up
again in the future. The upstream kernels got picky about module
parameters, so you might want to get rid of these warnings (which I
suppose you're still getting). I've seen cases where a single trailing
space in /etc/modprobe.conf prevented the kernel from loading a module.
[1] http://diary.codemonkey.org.uk/#20050116
Wow. All I can say is wow.
I had in my modprobe.conf the following: (note space at end)
'options scsi_mod max_luns=10 '
I did have this commented out, but I have been getting that strange
error message for a while.
Thanks a lot. It is a good 'gotcha' to look for from now on.
--
Brian Millett - [ Sofie Ivanova / Susan Ivanova, "Eyes"]
"Only one way out. Only one way."
6:16 a.m.
Jeff Spaleta wrote:
On Tue, 25 Jan 2005 12:55:58 -0600, Brian Millett
<bpm(a)ec-group.com> wrote:
>I am running rawhide.
>I just noticed that the usb flashdrive does not get mounted, or
>anything. It is because none of the modules are loaded for usb storage.
>I do not know which system this would apply to. HAL? HOTPLUG?
>initscripts?
udev
Jeff, what makes you think this is udev???
7:02 p.m.
On Wed, 26 Jan 2005 13:16:53 +0100, Harald Hoyer <harald(a)redhat.com> wrote:
Jeff, what makes you think this is udev???
I'm just suggesting one more thing to add to his list of things to
check. I have no idea what the actual problem is, without any error
messages or logging to look over.... neither of which were provided
nor referenced in his original post.
-jef
7037
days inactive
7039
days old
7 comments
4 participants
participants (4)
-
Brian Millett -
Harald Hoyer -
Jef Spaleta -
Ziga Mahkovec