RE: Postfix MySQL Support
by Thomas Antony
Nachdem ich mysqlclient9 aus requires und build requires entfernt habe und
AUXLIBS="${AUXLIBS} -L%{_libdir}/mysql -lmysqlclient -lm" auf
AUXLIBS="${AUXLIBS} -L%{_libdir}64/mysql -lmysqlclient -lm" geändert habe, läuft rpmbuild auch erfolgreich fertig.
> P.S. Dein Mailer macht die Threads kaputt. Nicht grad toll auf Mailinglisten.
In wie fern?
> Aber man weiß ja wie schlecht MS Exchange ist.
Auf dem Rechner auf dem ich nun Postfix installiert habe, wird den Exchange Server ersetzen ;)
Eine andere Möglichkeit besteht leider derzeit nicht. Sorry
Thomas
-----Original Message-----
From: fedora-de-list-bounces(a)redhat.com [mailto:fedora-de-list-bounces@redhat.com] On Behalf Of Alexander Dalloz
Posted At: Friday, April 23, 2004 5:39 PM
Posted To: Mailing Lists
Conversation: Postfix MySQL Support
Subject: RE: Postfix MySQL Support
Am Fr, den 23.04.2004 schrieb Thomas Antony um 17:25:
> Wie Michael bereits vermutet hat klappt das nicht wenn ich mysqlclient9 auf mysqlclient10 ändere.
> Wenn ich überhaupt mysqlclient aus dem spec entferne, erhalte ich einen Fehler bei rpmbuild.
> /usr/bin/ld: cannot find -lmysqlclient
>
> Thomas
Überprüfe und ändere mal im .spec file die Zeilen 156 bis 159:
%if %{MYSQL}
CCARGS="${CCARGS} -DHAS_MYSQL -I/usr/include/mysql"
AUXLIBS="${AUXLIBS} -L%{_libdir}/mysql -lmysqlclient -lm"
%endif
Alexander
P.S. Dein Mailer macht die Threads kaputt. Nicht grad toll auf Mailinglisten. Aber man weiß ja wie schlecht MS Exchange ist.
--
Alexander Dalloz | Enger, Germany | GPG key 1024D/ED695653 1999-07-13 Fedora GNU/Linux Core 1 (Yarrow) on Athlon CPU kernel 2.4.22-1.2179.nptl Sirendipity 17:36:38 up 5 days, 22 users, load average: 0.03, 0.15,
[ Γνωθι σ'αυτον - gnothi seauton ]
my life is a planetarium - and you are the stars
20 years
RE: Postfix MySQL Support
by Thomas Antony
Wie Michael bereits vermutet hat klappt das nicht wenn ich mysqlclient9 auf mysqlclient10 ändere.
Wenn ich überhaupt mysqlclient aus dem spec entferne, erhalte ich einen Fehler bei rpmbuild.
/usr/bin/ld: cannot find -lmysqlclient
Thomas
-----Original Message-----
From: fedora-de-list-bounces(a)redhat.com [mailto:fedora-de-list-bounces@redhat.com] On Behalf Of Michael Schwendt
Posted At: Friday, April 23, 2004 5:15 PM
Posted To: Mailing Lists
Conversation: Postfix MySQL Support
Subject: Re: Postfix MySQL Support
On Fri, 23 Apr 2004 17:02:35 +0200, Alexander Dalloz wrote:
> Das .spec file ist hinsichtlich Kompilierung mit MySQL Support kaputt
> :( Ziemlich erstaunlich.
Wie "erstaunlich"?
> Ich habe mir mal das SRPM geholt und ins .spec file geschaut. Der
> relevante Abschnitt sieht so aus:
>
> %if %{MYSQL}
> Requires: mysql, mysqlclient9
> BuildRequires: mysql, mysqlclient9, mysql-devel %endif
>
> Ändere das doch mal nach mysqlclient10 sowohl für Requires wie auch
> BuildRequires.
Das wäre recht wild geraten, denn:
$ rpm --redhatprovides mysqlclient10
no package provides mysqlclient10
"mysqlclient10" bezieht sich hier auf einen Paketnamen oder eine "virtual capability". Keines von beiden existiert in FC1.
> Wie Michael völlig richtig mailte, stammt die
> mysqlclient9 library noch aus alten Redhat Zeiten. FC1 kommt mit
> /usr/lib/mysql/libmysqlclient.so.10.
Das wäre dann aber "Buildrequires: mysql-devel" und nichts weiter.
20 years
fat
by David
Also das mit den NTFS hab ich hinbekommen.
Ich hab aber noch eine FAT Partition, wo meine Daten liegen,
die ich unter Windows und Linux brauche.
Auf FAT Filesystems ist es ja risikolos zu schreiben.
Mein Eintrag in der fstab ist folgendermaßen für FAT:
/dev/hda8 /backup vfat default 0 0
Im Moment kann ich nur als root darauf schreiben.
Ich möchte aber das jeder darauf schreiben kann.
Also wie muss ich den Eintrag verändern?
20 years
RE: Postfix MySQL Support
by Thomas Antony
Das SRPM ist installiert!
Thomas
-----Original Message-----
From: fedora-de-list-bounces(a)redhat.com [mailto:fedora-de-list-bounces@redhat.com] On Behalf Of Alexander Dalloz
Posted At: Friday, April 23, 2004 3:04 PM
Posted To: Mailing Lists
Conversation: Postfix MySQL Support
Subject: Re: Postfix MySQL Support
Am Fr, den 23.04.2004 schrieb Thomas Antony um 14:41:
> Hi,
>
> Ich habe Paket Abhängigkeits Probleme wenn ich Postfix mit MySQL Support von dem src.rpm neu kompilieren will.
> Ich bin dabei nach der Anleitung von http://www.fedora.us/wiki/PostfixWithMySQL vorgegangen.
> Bei "rpmbuild -bb ~/rpmbuild/SPEC/postfix.spec" erhalte ich immer:
>
> Fehler: Failed build dependencies
> mysqlclient9 is needed by postfix-2.0.11-5
>
> OS ist FC1 AMD64 und die Pakte mysql, mysql-server und mysql-devel sind installiert. Welches rpm beinhaltet mysqlclient9?
>
>
> Thomas
Du solltest dir auch bitte schön das aktuelle Postfix SRPM downloaden!
http://wftp.tu-chemnitz.de/pub/linux/fedora-core/updates/1/SRPMS/postfix-...
Dann klappt es auch mit der MySQL library-Abhängigkeit. Das WiKi Papier spricht ja auch klar von dieser Versionsnummer.
Alexander
--
Alexander Dalloz | Enger, Germany | GPG key 1024D/ED695653 1999-07-13 Fedora GNU/Linux Core 1 (Yarrow) on Athlon CPU kernel 2.4.22-1.2179.nptl Sirendipity 15:01:43 up 4 days, 21:47, load average: 0.52, 0.32, 0.17
[ Γνωθι σ'αυτον - gnothi seauton ]
my life is a planetarium - and you are the stars
20 years
Synaptic und srpms
by Patrice Brockhaus
Hallo!
Kann ich mit Synaptic auch Source-Rpms downloaden und installieren, oder muss
ich da auf andere Tools ausweichen?
Grüße,
Patrice
20 years
Postfix MySQL Support
by Thomas Antony
Hi,
Ich habe Paket Abhängigkeits Probleme wenn ich Postfix mit MySQL Support von dem src.rpm neu kompilieren will.
Ich bin dabei nach der Anleitung von http://www.fedora.us/wiki/PostfixWithMySQL vorgegangen.
Bei "rpmbuild -bb ~/rpmbuild/SPEC/postfix.spec" erhalte ich immer:
Fehler: Failed build dependencies
mysqlclient9 is needed by postfix-2.0.11-5
OS ist FC1 AMD64 und die Pakte mysql, mysql-server und mysql-devel sind installiert. Welches rpm beinhaltet mysqlclient9?
Thomas
20 years
HealthCare Sector/Medical Technologies - AMTK Exclusive Contracts, Wed, 21 Apr 2004 10:16:07 -0500
by Lamont Xiong
Equity Spoltight - Wed, 21 Apr 2004 10:16:07 -0500
Symbol: AMTK - Austin Medical Technologies
Sector: HealthCare/Medical Technologies
AMTK - On the Cutting Edge of Medical Technologies
AMTK is experiencing strong and sturdy growth due to the continued demand for its products and services utilized by surgeons throughout the world. The business is an annuity model with recurring revenue each month. Customers sign multi-year contracts, and AMTK maintains a track record of 95% contract renewal.
AMTK delivers "DIRECT" from the manufacturer to the surgeon, the only technology-based "Single Source Supply Solution" serving the Ambulatory Surgery Center (ASC) market. Under the brand name eyeDirecti, AMTK is initially focused on surgeon-owned and operated ASCs which consist of 2,500 practices with 15,000 surgeons performing 4.4 million surgical procedures annually at a supply cost of 400 million dollars per year.
HIGHLIGHTS
1) AMTK has exclusive contracts with leading HealthCare companies such as Baxter, Medtronic, Allergan, and OcuSoft.
2) AMTK is a manufacturer and distributor of several hundred medical and surgical products -- enough to fill 80 percent of a typical ASC's supply needs.
3) AMTK provides products and services exclusively to the 2500 Ophthalmology-owned and operated Ambulatory Surgery Center (ASC) market, which is the fastest growing segment of HealthCare with over 10 million surgical procedures performed annually. AMTK is focused on providing disposable surgical supplies and superior service to this outpatient HealthCare provider.
4) AMTK's founders have more than 100 years' experience in the ophthalmic surgical products and technology industries.
AUSTIN MEDICAL TECHNOLOGIES, Inc.
AMTK provides hundreds of products and technology-based services needed by ASC's. AMTK offers disposable surgical instruments, custom sterile procedure packs, intravenous solutions, patient care supplies, and technology to enhance efficiencies and eliminate cost to the customer. AMTK's in-depth knowledge concerning special interactions among ASC's and manufacturers has driven it to create the surgical eye care supply chain and e-commerce solution that dramatically simplifies the distinctive methods and processes used byits customers to manage their business.
AMTK has exclusive contracts with leading HealthCare companies such as Baxter, Medtronic, Allergan, and OcuSoft for manufacturing and distribution of the products it markets. This is key: AMTK provides not just products but also a unique set of innovative, integrated cost-management services. These are extremely important in HealthCare today; they allow ASC's to save money and focus on patient care rather than supplies and logistics.
Customer Requirements
Every year 10 million surgical procedures are performed within the ophthalmic ASC market. Every day there are more than a million people making outpatient visits to medical centers across the country. The nation spends about a trillion dollars a year -- a sixth of its total economy -- on HealthCare. That amount continues to grow as the population ages and new medical capabilities develop. Globally, HealthCare is a large, vital, growing industry.
How Austin Medical Technology Responds
More than any other company in HealthCare, AMTK can help ophthalmic ASC's manage their costs and their resources. AMTK can address the 20-plus percent of an ASC budget that goes for supplies and the additional 20 percent or more that very often is devoted to managing those supplies.
AMTK is a manufacturer and distributor of several hundred medical and surgical products -- enough to fill 80 percent of a typical ASC's supply needs. More important, AMTK integrates its total product-offering with unique services that have been proven to help control HealthCare costs. AMTK helps its customers purchase and use fewer supplies. AMTK helps them order and manage inventories more efficiently.
Custom Procedure Trays (CPT's) aka "packs" incorporate 70-80% of disposable surgical supplies utilized on a procedure specific basis. CPT's is a 2 billion dollar industry HealthCare wide and $400 million within the ophthalmic ASC market. 95% of ophthalmologists utilize packs for Cataract, Retinal and Plastic procedures. LASIK packs are now being created for this new procedure.
Stock Market Watcher is an independent research firm. This report is based on Stock Market Watcher's independent analysis but also relies on information supplied by sources believed to be reliable. This report may not be the opinion of AMTK management. Stock Market Watcher has also been retained to research and issue reports on AMTK. Stock Market Watcher may from time to time purchase or sell AMTK common shares in the open market without notice. The information contained in this report shall not constitute, an offer to sell or solicitation of any offer to purchase any security. It is intended for information only. Some statements may contain so-called "forward-looking statements". Many factors could cause actual results to differ. Investors should consult with their Investment Advisor concerning AMTK. Copyright 2004 © Stock Market Watcher Ltd. SMS, Apartado 173-3006 Zona Franca MeoBarreal Heredia, Costa Rica. All Rights Reserved. This newsletter was distributed by MMS,Inc. !
MMS was paid four thousand dollars to distribute this report. MMS is not affiiated with Stock Market Watcher and is not responsible for newsletter content.
No more ads, breetyrrell(a)poczta.onet.pl
city
platonism houseboat pantheism droopy fealty rat capacious crewman amethystine cartesian charlemagne kalamazoo debutante delineate attentive sherry item contort wraith diocesan univariate hypothalamic aloe crosspoint bobcat support t epidermis jacobson swamp waylaid diaper hoydenish facto warehouse
centrex laryngeal chutney lilt adrift market domain price chopin contravene beatific butene contribute wishy plato delft vendetta hysteron demitting dressmake czech bootstrap misty challenge postgraduate chow anus atop chicory egan beachhead buzzard saccharine compromise raisin projector canterelle
20 years
fedora auf cd (kein breitband internet verfügbar)
by Christian Thanner
hi an alle,
nach schon ewigem vorsatz will ich jetzt wirklich von windows abstand
nehmen und auf linux umsteigen, und dafür wär fedora eine gute wahl, hab
ich mir sagen lassen.
jetzt ist es aber so, dass ich kein breitband-internet hab, drum meine
frage: könnte mir vielleicht jemand die 3 fedora cds brennen und schicken
nach wien bzw. hier in wien kann ich sie mir natürlich auch gern selber
abholen? (für die kosten komm ich natürlich gern auf, sei nur der
vollständigkeit halber angemerkt.)
dass ich die cds nicht hab ist jetzt eigentlich das einzige, das mich noch
an mein windows bindet; kann mir da jemand aushelfen?
mfg, christian
20 years
RE: Antwort: RE: Antwort: Reduntantes LVM
by Thomas Antony
Hi,
Ich erstelle LVM/RAID bei der Installation, was mir nun endlich gelungen ist. Das Problem war natürlich "user error" ;)
Die Partitionierung ist nun:
md0 / 1000MB
md1 swap 2048MB
md2 LVM/VG restMB
thx
Thomas
-----Original Message-----
From: fedora-de-list-bounces(a)redhat.com [mailto:fedora-de-list-bounces@redhat.com] On Behalf Of Andreas Reschke
Posted At: Monday, April 19, 2004 1:36 PM
Posted To: Mailing Lists
Conversation: Antwort: RE: Antwort: Reduntantes LVM
Subject: Antwort: RE: Antwort: Reduntantes LVM
Hallo Peter,
jaja, es war ein Denkfehler von mir. Andersherum ist besser (-; Zu Thomas: Es gibt 4 Primäre Partitionen und beliebig? weitere Partitionen. Frage: Wie erstellt du deine LVM/RAID? Gleich bei der Installation oder später im laufenden Betrieb? Ich kam noch nie über 5-6 Partitionen hinaus.
Gruß
Andreas
--
BEHR GmbH & Co Tel. 0711-896-4598
Andreas Reschke Fax: 0711-8902-4598
Abteilung BG-IM23 IT-Services Mobil: 0172-6307978
Unix/Linux-Administration andreas.reschke(a)behrgroup.com
Siemensstrasse 164
D-70469 Stuttgart
"Thomas Antony" <t.antony(a)gily.at>
Gesendet von: fedora-de-list-bounces(a)redhat.com
19.04.2004 13:23
Bitte antworten an Fedora discussions in German
An: "Fedora discussions in German" <fedora-de-list(a)redhat.com>
Kopie:
Thema: RE: Antwort: Reduntantes LVM
Ich scheitere leider bereits an der Partitionierung. Im Rechner sind 2 120 GB SATA Festplatten und will sie wie folgt partinionieren:
/boot 100MB RAID1
swap 2048MB RAID1
/ 15GB RAID1 mit LVM
/home 60GB RAID1 mit LVM
/var 43GB RAID1 mit LVM
Wenn ich zuerst alle RAID 1 (md0-5) anlege kann ich kein LVM mehr bilden, weil keine freien Partitionen mehr zur Verfügung stehen und umgekehrt ist es das gleiche. Muss ich zuerst /boot, swap, und eine große / bilden, Fedora installieren und dann in der großen / das LVM erstellen?
Thomas
-----Original Message-----
From: fedora-de-list-bounces(a)redhat.com [mailto:fedora-de-list-bounces@redhat.com] On Behalf Of peter(a)vratny.at Posted At: Friday, April 16, 2004 8:34 PM Posted To: Mailing Lists
Conversation: Antwort: Reduntantes LVM
Subject: Re: Antwort: Reduntantes LVM
On Fri, Apr 16, 2004 at 04:54:19PM +0200, Thomas Antony wrote:
>
> Danke, ich werde das demnächst probieren.
>
> > BTW: wozu dieser Aufwand?
>
> Für die Verfügbarkeit des Servers werde ich RAID 1 einsetzen und für die
Flexibilität dann zusätzlich noch LVM.
Ich glaube du hast einen Denkfehler: du solltest nicht zuerst ein LVM
aufsetzen und dann dieses spiegeln sondern umgekehrt. Erstelle ein
Filesystem, dass Redundanz aufweist (zB Raid1/Raid5...) und bilde _darin_
dann ein LVM...
Beispiel aus meinem Wald-und-Wiesen Server hier:
/etc/raidtab:
raiddev /dev/md5
raid-level 5
nr-raid-disks 3
chunk-size 64
persistent-superblock 1
nr-spare-disks 0
device /dev/hdb1
raid-disk 0
device /dev/hde1
raid-disk 1
device /dev/hdg1
raid-disk 2
[peter@bladerunner ~]$ cat /proc/mdstat Personalities : [raid1] [raid5]
read_ahead 1024 sectors
md5 : active raid5 hdb1[0] hde1[1] hdg1[2]
234436352 blocks level 5, 64k chunk, algorithm 0 [3/3] [UUU]
Auf diesem Raid dann einfach ein LVM konfigurieren:
ergibt zB.:
Filesystem Size Used Avail Use% Mounted on
/dev/vghome/lvhome 221G 135G 75G 65% /home
mit 3 x 120GB in obiger Konfiguration.
Diese LV kannst du dann jederzeit erweitern, indem du zB ein neues RAID5
als PV anlegst und der VG hinzufügst. Die Redundanz erreichst du, indem
die zugrunde liegenden devices redundant machst. LVM ist es egal, ob das
nun ein /dev/md, ein Hardware-Raid oder ein was auch immer ist. Imho
kannst du auch RAID1, 5, und Hardware-Raids in einer VG mixen. Du solltest
nur nicht den Fehler begehen, irgendwo einen single point of failure
einzubauen. Das kann bei der Mixtur tötlich sein. Eine Hot-Spare Platte
ist eigentlich (nicht wie oben) zu empfehlen.
hth
Peter
--
| love music_hate fascism | ...aber euer Leben zwickt |
| use free software | und drückt nur dann nicht, |
| use encryption | wenn man sich bückt. |
|_gpg_http://ps1.at/~peter____|__[Wir sind Helden, Reklamation]_|
--
Fedora-de-list mailing list
Fedora-de-list(a)redhat.com
http://www.redhat.com/mailman/listinfo/fedora-de-list
--
Fedora-de-list mailing list
Fedora-de-list(a)redhat.com
http://www.redhat.com/mailman/listinfo/fedora-de-list
20 years
RE: Antwort: Reduntantes LVM
by Thomas Antony
Ich scheitere leider bereits an der Partitionierung. Im Rechner sind 2 120 GB SATA Festplatten und will sie wie folgt partinionieren:
/boot 100MB RAID1
swap 2048MB RAID1
/ 15GB RAID1 mit LVM
/home 60GB RAID1 mit LVM
/var 43GB RAID1 mit LVM
Wenn ich zuerst alle RAID 1 (md0-5) anlege kann ich kein LVM mehr bilden, weil keine freien Partitionen mehr zur Verfügung stehen und umgekehrt ist es das gleiche. Muss ich zuerst /boot, swap, und eine große / bilden, Fedora installieren und dann in der großen / das LVM erstellen?
Thomas
-----Original Message-----
From: fedora-de-list-bounces(a)redhat.com [mailto:fedora-de-list-bounces@redhat.com] On Behalf Of peter(a)vratny.at
Posted At: Friday, April 16, 2004 8:34 PM
Posted To: Mailing Lists
Conversation: Antwort: Reduntantes LVM
Subject: Re: Antwort: Reduntantes LVM
On Fri, Apr 16, 2004 at 04:54:19PM +0200, Thomas Antony wrote:
>
> Danke, ich werde das demnächst probieren.
>
> > BTW: wozu dieser Aufwand?
>
> Für die Verfügbarkeit des Servers werde ich RAID 1 einsetzen und für die Flexibilität dann zusätzlich noch LVM.
Ich glaube du hast einen Denkfehler: du solltest nicht zuerst ein LVM aufsetzen und dann dieses spiegeln sondern umgekehrt. Erstelle ein Filesystem, dass Redundanz aufweist (zB Raid1/Raid5...) und bilde _darin_ dann ein LVM...
Beispiel aus meinem Wald-und-Wiesen Server hier:
/etc/raidtab:
raiddev /dev/md5
raid-level 5
nr-raid-disks 3
chunk-size 64
persistent-superblock 1
nr-spare-disks 0
device /dev/hdb1
raid-disk 0
device /dev/hde1
raid-disk 1
device /dev/hdg1
raid-disk 2
[peter@bladerunner ~]$ cat /proc/mdstat Personalities : [raid1] [raid5] read_ahead 1024 sectors
md5 : active raid5 hdb1[0] hde1[1] hdg1[2]
234436352 blocks level 5, 64k chunk, algorithm 0 [3/3] [UUU]
Auf diesem Raid dann einfach ein LVM konfigurieren:
ergibt zB.:
Filesystem Size Used Avail Use% Mounted on
/dev/vghome/lvhome 221G 135G 75G 65% /home
mit 3 x 120GB in obiger Konfiguration.
Diese LV kannst du dann jederzeit erweitern, indem du zB ein neues RAID5 als PV anlegst und der VG hinzufügst. Die Redundanz erreichst du, indem die zugrunde liegenden devices redundant machst. LVM ist es egal, ob das nun ein /dev/md, ein Hardware-Raid oder ein was auch immer ist. Imho kannst du auch RAID1, 5, und Hardware-Raids in einer VG mixen. Du solltest nur nicht den Fehler begehen, irgendwo einen single point of failure einzubauen. Das kann bei der Mixtur tötlich sein. Eine Hot-Spare Platte ist eigentlich (nicht wie oben) zu empfehlen.
hth
Peter
--
| love music_hate fascism | ...aber euer Leben zwickt |
| use free software | und drückt nur dann nicht, |
| use encryption | wenn man sich bückt. |
|_gpg_http://ps1.at/~peter____|__[Wir sind Helden, Reklamation]_|
20 years