Martin Stemplinger wrote:
Hallo zusammen,
ich habe ein kleines Problem mit einem USB Card Reader (SIGMA MCR
100) unter Fedora Core 2 (Kernel 2.6.8-1.521):
Laut dmesg wird der Reader erkannt:
Attached scsi generic sg0 at scsi3, channel 0, id 0, lun 0, type 0
USB Mass Storage device found at 5
usb 2-2: USB disconnect, address 5
usb 2-2: new full speed USB device using address 6
scsi4 : SCSI emulation for USB Mass Storage devices
Vendor: Model: USB Card Reader Rev: 1.19
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sda at scsi4, channel 0, id 0, lun 0
^^^
Attached scsi generic sg0 at scsi4, channel 0, id 0, lun 0, type 0
USB Mass Storage device found at 6
Allerdings habe ich keine Ahnung, welches Device ich beim Mount
verwenden muss.
Siehe oben. Ich nehme mal an, dass im Kartenleser keine Karte eingelegt
ist. Üblicherweise existiert auf den Karten eine Partion, dies wäre
dann /dev/sda1.
Grüße,
Andreas.