i810 und TVout Probleme
Hallo Zusammen,
ich habe Probleme mit dem i810 Treiber und dem TVout nach dem Switch von FC6
nach Fedora 7.
Am Barbone hängt nur ein TV über SVIDEO.
Zum Einsatz kommt ein Barbone MSI "Hetis 865GV-E Giga"
00:02.0 VGA compatible controller: Intel Corporation 82865G Integrated
Graphics Controller (rev 02) (prog-if 00 [VGA])
Subsystem: Micro-Star International Co., Ltd. Unknown device 7650
Flags: bus master, fast devsel, latency 0, IRQ 11
Memory at f0000000 (32-bit, prefetchable) [size=128M]
Memory at ffe80000 (32-bit, non-prefetchable) [size=512K]
I/O ports at ec00 [size=8]
Capabilities: [d0] Power Management version 1
Das Problem geht schon bei der Installation los unter FC6 keine Probleme Bild
über svideo vorhanden unter FC7 nur senkrechte Streifen (es scheint das
Sync-Signal nicht zu stimmen). Habe dann mit mit einem Monitor installiert
und alte xorg.conf eingespielt. Wie gehabt, sich bewegende, senkrechte
Streifen. Zurück zu FC6 alles ok.
xorg.conf:
------------------------------------------------------------------------------------------------
# Xorg configuration created by system-config-display
Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
# RgbPath is the location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
Load "dri"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor 800x600"
#HorizSync 31.5 - 48.5
#VertRefresh 50.0 - 60.0
Option "dpms"
interlace -hsync -vsync
EndSection
Section "Device"
Identifier "Videocard0"
Driver "i810"
VendorName "Videocard vendor"
BoardName "Intel 865"
Option "MonitorLayout" "TV"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 16
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
------------------------------------------------------------------------------------------------
Nun meine Frage gibt es irgend welche tiefer greifenden Änderungen im i810
Treiber?