On 2020-04-28 11:07, ToddAndMargo via test wrote:
On 2020-04-26 18:47, Ed Greshko wrote:
> On 2020-04-27 09:43, Samuel Sieb wrote:
>> On 4/26/20 6:22 PM, ToddAndMargo via test wrote:
>>> On 2020-04-26 14:48, ToddAndMargo via test wrote:
>>>
>>>>>>
>>>>>> "dnf remove network-scripts"
>>>
>>> And I just put it back in as qemu-kvm requires it
>>> to do bridge networking (br0)
>>
>> I use kvm with bridge networking and I don't have network-scripts
>> installed.
>>
>
> Same here....
>
> virsh # iface-dumpxml virbr0
> <interface type='bridge' name='virbr0'>
> <protocol family='ipv4'>
> <ip address='192.168.122.1' prefix='24'/>
> </protocol>
> <protocol family='ipv6'>
> <ip address='2001:b030:112f:2::2' prefix='64'/>
> <ip address='fe80::5054:ff:fe9a:e849' prefix='64'/>
> </protocol>
> <bridge>
> <interface type='ethernet' name='virbr0-nic'>
> <link state='down'/>
> <mac address='52:54:00:9a:e8:49'/>
> </interface>
> <interface type='ethernet' name='vnet0'>
> <link state='unknown'/>
> <mac address='fe:54:00:9b:21:c1'/>
> </interface>
> </bridge>
> </interface>
It has to do with how I handle iptables and two Ethernet
ports and how I pass through to the Internet
virsh # iface-dumpxml "br0"
<interface type='bridge' name='br0'>
<protocol family='ipv4'>
<ip address='192.168.255.10' prefix='24'/>
<ip address='192.168.255.116' prefix='24'/>
</protocol>
<protocol family='ipv6'>
<ip address='fe80::fc62:7fff:fefe:1fdf' prefix='64'/>
</protocol>
<bridge>
<interface type='ethernet' name='eno1'>
<link state='down'/>
<mac address='ac:1f:6b:62:10:06'/>
</interface>
<interface type='ethernet' name='vnet0'>
<link state='unknown'/>
<mac address='fe:54:00:eb:37:2b'/>
</interface>
</bridge>
</interface>