Re: External USB-drive and F15
Tim:
> I have a seagate drive that falls asleep when it gets bored.
Sometimes
> it's quick to wake up (a few seconds), other times it takes ages
> (minutes), or may not wake up. I'm wondering if it has three different
> sleep levels.
Hiisi:
Well, yes. Fortunately you can configure sleep time-out using hdparm
or even turn off power management completely. See man hdparm. I also
find wikipedia page on hdparm very useful. Here it is:
http://en.wikipedia.org/wiki/Hdparm
Unfortunately, that doesn't seem to work with one of my firewire
connected drives.
# /sbin/hdparm -B255 /dev/sdd
/dev/sdd:
setting Advanced Power Management level to disabled
HDIO_DRIVE_CMD failed: Invalid argument
I'd already used hdparm, years ago, to save my laptop's internal drive
from an early death.
And, smartctl can't be used with either of the USB or firewire external
drives that I have (to check on them). The interface to the drive is
too dumb, or the program isn't programmed to work through those
interfaces.
> I also find I'm getting errors. The drive can be heard
clacking away
> *trying* to read, some files sometimes. And I'm also wondering whether
> it falls asleep before any drive changes get committed.
If in doubt use sync ;- )
Well, the trouble is the drive falling asleep at some time that you
didn't notice... ;-) But since the dozing is some time after the last
access, you'd expect that the file system changes would have been
committed before the drive went to sleep.
I'm beginning to have suspicions that suspending the laptop is part of
the equation.
--
[tim@localhost ~]$ uname -r
2.6.27.25-78.2.56.fc9.i686
Don't send private replies to my address, the mailbox is ignored. I
read messages from the public lists.