Re: Network Manager issue in F9

I have 2 laptops running F9. Both run NetworkManager. On one, a Dell Inspiron 8600, when I run nm-tool I get the following output (for brevity I'm only showing the wired info since that's where the issue is): NetworkManager Tool State: connected - Device: eth0 ---------------------------------------------------------------- Type: Wired Driver: b44 State: connected HW Address: 00:0D:56:36:EB:13 Capabilities: Supported: yes Carrier Detect: yes Speed: 100 Mb/s Wired Settings Note that it says the status is connected. On the other laptop, a Dell Precision Mobile M65, I get the following output NetworkManager Tool State: disconnected - Device: eth0 ---------------------------------------------------------------- Type: Wired Driver: tg3 State: unmanaged HW Address: 00:00:00:00:00:00 Capabilities: Supported: yes Carrier Detect: yes Speed: 1000 Mb/s Wired Settings Note that it says the state is disconnected despite the fact that I'm logged into the system remotely. Also note that the MAC address associated with the wired interface is all 0's. What's going on here? Anybody else see this problem? An lspci of the M65 shows: 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port (rev 03) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01) 00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 01) 00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01) 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 01) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) 01:00.0 VGA compatible controller: nVidia Corporation G72GL [Quadro FX 350M] (rev a1) 03:01.0 CardBus bridge: O2 Micro, Inc. Cardbus bridge (rev 21) 03:01.4 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) 09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5752 Gigabit Ethernet PCI Express (rev 02) 0c:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02) The annoying aspect of this is that every time I start Firefox 3 it comes up in offline mode. I've had to go back to Firefox 2 to get around this annoyance. Any help is appreciated. Thanks, Paolo -- fedora-list mailing list fedora-list(a)redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list