12:37 p.m.
Well just a month ago, I used ntfs-3g and fuse to work with an external HDD on Fedora Core
6, a few days ago system cannot save files on my external HDD, I unmount HDD, and restart
and it was the solution, but now I can't create directories, the message is:
mkdir: no se puede crear el directorio
/media/mount_point_i_believe/directory/directory_to_create error de entrada/salida
I typed the command : dmesg at terminal
and this is the result:
sizeof(inode)=336 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=488 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=176 bytes
sizeof(task_struct)=1536 bytes
Time: 12:41:05 Date: 04/22/112
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=16
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [C002] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 1100-113f claimed by ICH6 GPIO
PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.C002._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C002.C098._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C002.C100._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C002.C110._PRT]
ACPI: PCI Interrupt Link [C10C] (IRQs *10 11)
ACPI: PCI Interrupt Link [C10D] (IRQs *10 11)
ACPI: PCI Interrupt Link [C10E] (IRQs 10 *11)
ACPI: PCI Interrupt Link [C10F] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [C11C] (IRQs 10 11) *5
ACPI: PCI Interrupt Link [C11D] (IRQs *10 11)
ACPI: PCI Interrupt Link [C11E] (IRQs 10 11) *0, disabled.
ACPI Exception (pci_link-0179): AE_NOT_FOUND, Evaluating _PRS [20070126]
ACPI: Power Resource [C1FE] (on)
ACPI: Power Resource [C206] (on)
ACPI: Power Resource [C2EE] (off)
ACPI: Power Resource [C2EF] (off)
ACPI: Power Resource [C2F0] (off)
ACPI: Power Resource [C2F1] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:00: iomem range 0x100000-0x5f7fffff could not be reserved
pnp: 00:09: iomem range 0xffb00000-0xffbfffff could not be reserved
pnp: 00:09: iomem range 0xfff00000-0xffffffff could not be reserved
pnp: 00:0a: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0a: ioport range 0x1000-0x107f has been reserved
pnp: 00:0a: ioport range 0x1100-0x113f has been reserved
pnp: 00:0a: ioport range 0x1200-0x121f has been reserved
pnp: 00:0a: iomem range 0xf8000000-0xfbffffff has been reserved
pnp: 00:0a: iomem range 0xfec00000-0xfec000ff could not be reserved
pnp: 00:0a: iomem range 0xfed20000-0xfed3ffff could not be reserved
pnp: 00:0a: iomem range 0xfed45000-0xfed8ffff could not be reserved
pnp: 00:0b: iomem range 0xfeda0000-0xfedbffff could not be reserved
pnp: 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved
Time: tsc clocksource has been installed.
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.1
IO window: disabled.
MEM window: f0000000-f00fffff
PREFETCH window: disabled.
PCI: Bus 3, cardbus bridge: 0000:02:06.0
IO window: 00002400-000024ff
IO window: 00002800-000028ff
PREFETCH window: 60000000-63ffffff
MEM window: 64000000-67ffffff
PCI: Bridge: 0000:00:1e.0
IO window: 2000-2fff
MEM window: f0100000-f03fffff
PREFETCH window: 60000000-63ffffff
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 18
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 1506k freed
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1337690465.381:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key CAA333178AF1EC5F
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:02.0
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Transitioning device [C2F2] to D3
ACPI: Transitioning device [C2F2] to D3
ACPI: Fan [C2F2] (off)
ACPI: Transitioning device [C2F3] to D3
ACPI: Transitioning device [C2F3] to D3
ACPI: Fan [C2F3] (off)
ACPI: Transitioning device [C2F4] to D3
ACPI: Transitioning device [C2F4] to D3
ACPI: Fan [C2F4] (off)
ACPI: Transitioning device [C2F5] to D3
ACPI: Transitioning device [C2F5] to D3
ACPI: Fan [C2F5] (off)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present
[20070126]
Marking TSC unstable due to: possible TSC halt in C2.
Time: hpet clocksource has been installed.
ACPI: Thermal Zone [TZ0] (31 C)
ACPI: Thermal Zone [TZ1] (31 C)
ACPI: Thermal Zone [TZ2] (21 C)
ACPI: Thermal Zone [TZ3] (20 C)
ACPI: Thermal Zone [TZ4] (75 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Non-volatile memory driver v1.2
Linux agpgart interface v0.102 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
input: Macintosh mouse button emulation as /class/input/input0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH7: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
ICH7: chipset revision 1
ICH7: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x3040-0x3047, BIOS settings: hda:DMA, hdb:pio
Probing IDE interface ide0...
Clocksource tsc unstable (delta = -165098218 ns)
hda: HL-DT-ST DVDRAM GSA-T40N, ATAPI CD/DVD-ROM drive
hda: selected mode 0x22
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
ide-floppy driver 0.99.newide
Yenta: CardBus bridge found at 0000:02:06.0 [103c:30d5]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:06.0, mfunc 0x01be1b32, devctl 0x44
Yenta: ISA IRQ mask 0x04f8, PCI irq 18
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
cs: IO port probe 0x2000-0x2fff: clean.
pcmcia: parent PCI bridge Memory window: 0xf0100000 - 0xf03fffff
pcmcia: parent PCI bridge Memory window: 0x60000000 - 0x63ffffff
PNP: PS/2 Controller [PNP0303:C1FB,PNP0f13:C1FC] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Magic number: 12:52:684
hash matches device full
Freeing unused kernel memory: 268k freed
Write protecting the kernel read-only data: 925k
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 19, io base 0x00003020
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000
input: SynPS/2 Synaptics TouchPad as /class/input/input2
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 19, io mem 0xf0584000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
SCSI subsystem initialized
libata version 2.21 loaded.
ahci 0000:00:1f.2: version 2.2
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 21 (level, low) -> IRQ 20
usb 1-1: new full speed USB device using uhci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 cmd 0xf881e100 ctl 0x00000000 bmdma 0x00000000 irq 20
ata2: SATA max UDMA/133 cmd 0xf881e180 ctl 0x00000000 bmdma 0x00000000 irq 20
ata3: SATA max UDMA/133 cmd 0xf881e200 ctl 0x00000000 bmdma 0x00000000 irq 20
ata4: SATA max UDMA/133 cmd 0xf881e280 ctl 0x00000000 bmdma 0x00000000 irq 20
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: WDC WD1200BEVS-60UST0, 01.01A01, max UDMA/100
ata1.00: 234441648 sectors, multi 16: LBA48
ata1.00: configured for UDMA/100
ata2: SATA link down (SStatus 0 SControl 0)
ata3: SATA link down (SStatus 0 SControl 0)
ata4: SATA link down (SStatus 0 SControl 0)
scsi 0:0:0:0: Direct-Access ATA WDC WD1200BEVS-6 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or
FUA
sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or
FUA
sda: sda1 < sda5 sda6 sda7 sda8 sda9 sda10 > sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
audit(1337690471.509:2): enforcing=1 old_enforcing=0 auid=4294967295
security: 3 users, 6 roles, 1676 types, 213 bools, 1 sens, 1024 cats
security: 61 classes, 58427 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev sda9, type ext3), uses xattr
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
audit(1337690471.802:3): policy loaded auid=4294967295
hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 19
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
intel_rng: FWH not detected
cs: IO port probe 0xa00-0xaff: clean.
e100: eth0: e100_probe: addr 0xf0101000, irq 19, MAC addr 00:1E:EC:1C:C7:26
Floppy drive(s): fd0 is 1.44M
sd 0:0:0:0: Attached scsi generic sg0 type 0
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1b.0 to 64
floppy0: no floppy controllers found
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
lp: driver loaded but no devices found
sonypi: Sony Programmable I/O Controller Driver v1.26.
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
mtrr: no more MTRRs available
mtrr: no more MTRRs available
ACPI: AC Adapter [C1AB] (off-line)
ACPI: Battery Slot [C1AC] (battery present)
No dock devices found.
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /class/input/input4
ACPI: Sleep Button (CM) [C20B]
input: Lid Switch as /class/input/input5
ACPI: Lid Switch [C20C]
ACPI: Video Device [C085] (multi-head: yes rom: no post: no)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel(a)redhat.com
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on sda9, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda6, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda7, type ext3), uses xattr
Adding 10482372k swap on /dev/sda8. Priority:-1 extents:1 across:10482372k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
i2c /dev entries driver
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
eth0: no IPv6 routers present
mtrr: no more MTRRs available
mtrr: no more MTRRs available
usb 1-1.1: new full speed USB device using uhci_hcd and address 3
usb 1-1.1: not running at top speed; connect to a high speed hub
usb 1-1.1: configuration #1 chosen from 1 choice
hub 1-1.1:1.0: USB hub found
hub 1-1.1:1.0: 4 ports detected
usb 1-1.1.3: new full speed USB device using uhci_hcd and address 4
usb 1-1.1.3: not running at top speed; connect to a high speed hub
usb 1-1.1.3: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 1-1.1.4: new full speed USB device using uhci_hcd and address 5
usb 1-1.1.4: not running at top speed; connect to a high speed hub
usb 1-1.1.4: configuration #1 chosen from 1 choice
scsi5 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
scsi 4:0:0:0: Direct-Access Generic STORAGE DEVICE 9744 PQ: 0 ANSI: 0
sd 4:0:0:0: [sdb] Attached SCSI removable disk
sd 4:0:0:0: Attached scsi generic sg1 type 0
scsi 4:0:0:1: Direct-Access Generic STORAGE DEVICE 9744 PQ: 0 ANSI: 0
sd 4:0:0:1: [sdc] Attached SCSI removable disk
sd 4:0:0:1: Attached scsi generic sg2 type 0
scsi 4:0:0:2: Direct-Access Generic STORAGE DEVICE 9744 PQ: 0 ANSI: 0
sd 4:0:0:2: [sdd] Attached SCSI removable disk
sd 4:0:0:2: Attached scsi generic sg3 type 0
scsi 4:0:0:3: Direct-Access Generic STORAGE DEVICE 9744 PQ: 0 ANSI: 0
sd 4:0:0:3: [sde] Attached SCSI removable disk
sd 4:0:0:3: Attached scsi generic sg4 type 0
usb-storage: device scan complete
scsi 5:0:0:0: Direct-Access ST310005 28AS PQ: 0 ANSI: 2 CCS
sd 5:0:0:0: [sdf] 1953525168 512-byte hardware sectors (1000205 MB)
sd 5:0:0:0: [sdf] Write Protect is off
sd 5:0:0:0: [sdf] Mode Sense: 00 38 00 00
sd 5:0:0:0: [sdf] Assuming drive cache: write through
sd 5:0:0:0: [sdf] 1953525168 512-byte hardware sectors (1000205 MB)
sd 5:0:0:0: [sdf] Write Protect is off
sd 5:0:0:0: [sdf] Mode Sense: 00 38 00 00
sd 5:0:0:0: [sdf] Assuming drive cache: write through
sdf: sdf1
sd 5:0:0:0: [sdf] Attached SCSI disk
sd 5:0:0:0: Attached scsi generic sg5 type 0
usb-storage: device scan complete
fuse init (API version 7.8)
SELinux: initialized (dev sdf1, type fuseblk), uses genfs_contexts
SELinux: initialized (dev sdf1, type fuseblk), uses genfs_contexts
SELinux: initialized (dev sdf1, type fuseblk), uses genfs_contexts
usb 1-1.1.4: USB disconnect, address 5
hub 1-1.1:1.0: hub_port_status failed (err = -71)
hub 1-1.1:1.0: connect-debounce failed, port 4 disabled
hub 1-1.1:1.0: cannot disable port 4 (err = -71)
usb 1-1.1: USB disconnect, address 3
usb 1-1.1.3: USB disconnect, address 4
usb 1-1.1: new full speed USB device using uhci_hcd and address 6
usb 1-1.1: not running at top speed; connect to a high speed hub
usb 1-1.1: configuration #1 chosen from 1 choice
hub 1-1.1:1.0: USB hub found
hub 1-1.1:1.0: 4 ports detected
usb 1-1.1.3: new full speed USB device using uhci_hcd and address 7
usb 1-1.1.3: not running at top speed; connect to a high speed hub
usb 1-1.1.3: configuration #1 chosen from 1 choice
scsi6 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 7
usb-storage: waiting for device to settle before scanning
scsi 6:0:0:0: Direct-Access Generic STORAGE DEVICE 9744 PQ: 0 ANSI: 0
sd 6:0:0:0: [sdb] Attached SCSI removable disk
sd 6:0:0:0: Attached scsi generic sg1 type 0
scsi 6:0:0:1: Direct-Access Generic STORAGE DEVICE 9744 PQ: 0 ANSI: 0
sd 6:0:0:1: [sdc] Attached SCSI removable disk
sd 6:0:0:1: Attached scsi generic sg2 type 0
scsi 6:0:0:2: Direct-Access Generic STORAGE DEVICE 9744 PQ: 0 ANSI: 0
sd 6:0:0:2: [sdd] Attached SCSI removable disk
sd 6:0:0:2: Attached scsi generic sg3 type 0
scsi 6:0:0:3: Direct-Access Generic STORAGE DEVICE 9744 PQ: 0 ANSI: 0
sd 6:0:0:3: [sde] Attached SCSI removable disk
sd 6:0:0:3: Attached scsi generic sg4 type 0
usb-storage: device scan complete
usb 1-1.1.4: new full speed USB device using uhci_hcd and address 8
usb 1-1.1.4: not running at top speed; connect to a high speed hub
usb 1-1.1.4: configuration #1 chosen from 1 choice
scsi7 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 8
usb-storage: waiting for device to settle before scanning
scsi 7:0:0:0: Direct-Access ST310005 28AS PQ: 0 ANSI: 2 CCS
sd 7:0:0:0: [sdg] 1953525168 512-byte hardware sectors (1000205 MB)
sd 7:0:0:0: [sdg] Write Protect is off
sd 7:0:0:0: [sdg] Mode Sense: 00 38 00 00
sd 7:0:0:0: [sdg] Assuming drive cache: write through
sd 7:0:0:0: [sdg] 1953525168 512-byte hardware sectors (1000205 MB)
sd 7:0:0:0: [sdg] Write Protect is off
sd 7:0:0:0: [sdg] Mode Sense: 00 38 00 00
sd 7:0:0:0: [sdg] Assuming drive cache: write through
sdg: sdg1
sd 7:0:0:0: [sdg] Attached SCSI disk
sd 7:0:0:0: Attached scsi generic sg5 type 0
usb-storage: device scan complete
scsi 5:0:0:0: rejecting I/O to dead device
Buffer I/O error on device sdf1, logical block 122095175
scsi 5:0:0:0: rejecting I/O to dead device
Buffer I/O error on device sdf1, logical block 122095175
scsi 5:0:0:0: rejecting I/O to dead device
Buffer I/O error on device sdf1, logical block 786431
scsi 5:0:0:0: rejecting I/O to dead device
Buffer I/O error on device sdf1, logical block 786431
scsi 5:0:0:0: rejecting I/O to dead device
Buffer I/O error on device sdf1, logical block 786433
scsi 5:0:0:0: rejecting I/O to dead device
Buffer I/O error on device sdf1, logical block 786433
scsi 5:0:0:0: rejecting I/O to dead device
Buffer I/O error on device sdf1, logical block 786433
scsi 5:0:0:0: rejecting I/O to dead device
Buffer I/O error on device sdf1, logical block 786433
scsi 5:0:0:0: rejecting I/O to dead device
Buffer I/O error on device sdf1, logical block 786433
scsi 5:0:0:0: rejecting I/O to dead device
Buffer I/O error on device sdf1, logical block 786433
scsi 5:0:0:0: rejecting I/O to dead device
Buffer I/O error on device sdf1, logical block 122095175
scsi 5:0:0:0: rejecting I/O to dead device
Buffer I/O error on device sdf1, logical block 786431
This is just I could copy from Terminal, I don't know if it could be full info, for
your attention, thanks so much :)