Re: lmsesnors in 2.6 kernel
Am Fr, den 06.08.2004 schrieb Andrew Konosky um 3:35:
Okay, I set it up and have the two hdd temps 80 F, a
"temp1" which I am
guessing is the cpu, but it is reading 260 F!! , 2 fans @ 1000rpm, so
they must be case fans, and my voltage readings, which are pretty good.
I know I have a sensor to monitor cpu and hs fan speeds because I have a
monitor in windows.
The cpu temp has to be wrong or it would have burned up by now, but I am
going to check in windows to see what I should be getting. I should have
a ~4000rpm fan speed on the HS fan too. I didn't even know my case fans
had sensors, but I have 3 of the same fans and only 2 readings....
Seems you didn't read much documentation. You obviously need to adjust
/etc/sensors.conf file.
Alexander
--
Alexander Dalloz | Enger, Germany | GPG key 1024D/ED695653 1999-07-13
Fedora GNU/Linux Core 2 (Tettnang) kernel 2.6.7-1.494.2.2smp
Serendipity 03:55:26 up 1 day, 21:23, load average: 0.31, 0.27, 0.20
Attachments:
- signature.asc (application/pgp-signature — 189 bytes)