Everyone:
I have a three-year-old Dell Inspiron 1545. It came with the Dell Wireless 1397 WLAN Mini-Card.
The current output of lspci -k |grep -iA5 wire gives "Dell Wireless 1397 WLAN Mini-Card" as a subsystem. The relevant kernel module is "ssb."
Currently this card will not connect. Nor can I force it to connect by directly editing the network interface. I've tried several times, but I can't get to a MAC address for it.
What driver(s) or other kernel module(s) should I install, and where can I get them?
Broadcom has a 32-bit and a 64-bit tarball for what they say is a driver for this card. Should I install that on my system?
Please advise. It seems a shame to operate any laptop without wireless connectivity.
Temlakos
On 18.06.2014 17:13, Temlakos wrote:
Everyone:
I have a three-year-old Dell Inspiron 1545. It came with the Dell Wireless 1397 WLAN Mini-Card.
The current output of lspci -k |grep -iA5 wire gives "Dell Wireless 1397 WLAN Mini-Card" as a subsystem. The relevant kernel module is "ssb."
$ lspci -k |grep -iA5 Usage: grep [OPTION]... PATTERN [FILE]... Try 'grep --help' for more information.
Currently this card will not connect. Nor can I force it to connect by directly editing the network interface. I've tried several times, but I can't get to a MAC address for it.
What driver(s) or other kernel module(s) should I install, and where can I get them?
Broadcom has a 32-bit and a 64-bit tarball for what they say is a driver for this card. Should I install that on my system?
Please advise. It seems a shame to operate any laptop without wireless connectivity.
Temlakos
The complete output of this command: $ lspci -knn | grep -A100 Wireless
poma
On 06/18/2014 12:05 PM, poma wrote:
On 18.06.2014 17:13, Temlakos wrote:
Everyone:
I have a three-year-old Dell Inspiron 1545. It came with the Dell Wireless 1397 WLAN Mini-Card.
The current output of lspci -k |grep -iA5 wire gives "Dell Wireless 1397 WLAN Mini-Card" as a subsystem. The relevant kernel module is "ssb."
$ lspci -k |grep -iA5 Usage: grep [OPTION]... PATTERN [FILE]... Try 'grep --help' for more information.
Currently this card will not connect. Nor can I force it to connect by directly editing the network interface. I've tried several times, but I can't get to a MAC address for it.
What driver(s) or other kernel module(s) should I install, and where can I get them?
Broadcom has a 32-bit and a 64-bit tarball for what they say is a driver for this card. Should I install that on my system?
Please advise. It seems a shame to operate any laptop without wireless connectivity.
Temlakos
The complete output of this command: $ lspci -knn | grep -A100 Wireless
poma
The output, after a couple of module installations, now reads:
Subsystem: Dell Wireless 1397 WLAN Mini-Card [1028:000c] Kernel driver in use: b43-pci-bridge Kernel modules: ssb, wl
Still no wireless connection available on that laptop.
Temlakos
On 18.06.2014 19:11, Temlakos wrote:
On 06/18/2014 12:05 PM, poma wrote:
On 18.06.2014 17:13, Temlakos wrote:
Everyone:
I have a three-year-old Dell Inspiron 1545. It came with the Dell Wireless 1397 WLAN Mini-Card.
The current output of lspci -k |grep -iA5 wire gives "Dell Wireless 1397 WLAN Mini-Card" as a subsystem. The relevant kernel module is "ssb."
$ lspci -k |grep -iA5 Usage: grep [OPTION]... PATTERN [FILE]... Try 'grep --help' for more information.
Currently this card will not connect. Nor can I force it to connect by directly editing the network interface. I've tried several times, but I can't get to a MAC address for it.
What driver(s) or other kernel module(s) should I install, and where can I get them?
Broadcom has a 32-bit and a 64-bit tarball for what they say is a driver for this card. Should I install that on my system?
Please advise. It seems a shame to operate any laptop without wireless connectivity.
Temlakos
The complete output of this command: $ lspci -knn | grep -A100 Wireless
poma
The output, after a couple of module installations, now reads:
Subsystem: Dell Wireless 1397 WLAN Mini-Card [1028:000c] Kernel driver in use: b43-pci-bridge Kernel modules: ssb, wl
Still no wireless connection available on that laptop.
Temlakos
Whence is "wl"?
OK, to get to Vendor&Device ID, hit this command: $ lspci -knn | grep -A10 BCM4312
Output could look like this: <bus>:<dev>.<func> Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01) Subsystem: Dell Wireless 1397 WLAN Mini-Card [1028:000c] Kernel driver in use: wl Kernel modules: wl, ssb
"ssb" is a specific bus module, i.e. "Sonics Silicon Backplane driver" Your "BCM4312" is attached to it.
BTW do you have the firmware installed?
poma
On 06/18/2014 04:37 PM, poma wrote:
On 18.06.2014 19:11, Temlakos wrote:
On 06/18/2014 12:05 PM, poma wrote:
On 18.06.2014 17:13, Temlakos wrote:
Everyone:
I have a three-year-old Dell Inspiron 1545. It came with the Dell Wireless 1397 WLAN Mini-Card.
The current output of lspci -k |grep -iA5 wire gives "Dell Wireless 1397 WLAN Mini-Card" as a subsystem. The relevant kernel module is "ssb."
$ lspci -k |grep -iA5 Usage: grep [OPTION]... PATTERN [FILE]... Try 'grep --help' for more information.
Currently this card will not connect. Nor can I force it to connect by directly editing the network interface. I've tried several times, but I can't get to a MAC address for it.
What driver(s) or other kernel module(s) should I install, and where can I get them?
Broadcom has a 32-bit and a 64-bit tarball for what they say is a driver for this card. Should I install that on my system?
Please advise. It seems a shame to operate any laptop without wireless connectivity.
Temlakos
The complete output of this command: $ lspci -knn | grep -A100 Wireless
poma
The output, after a couple of module installations, now reads:
Subsystem: Dell Wireless 1397 WLAN Mini-Card [1028:000c] Kernel driver in use: b43-pci-bridge Kernel modules: ssb, wl
Still no wireless connection available on that laptop.
Temlakos
Whence is "wl"?
OK, to get to Vendor&Device ID, hit this command: $ lspci -knn | grep -A10 BCM4312
Output could look like this: <bus>:<dev>.<func> Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01) Subsystem: Dell Wireless 1397 WLAN Mini-Card [1028:000c] Kernel driver in use: wl Kernel modules: wl, ssb
"ssb" is a specific bus module, i.e. "Sonics Silicon Backplane driver" Your "BCM4312" is attached to it.
BTW do you have the firmware installed?
poma
Earlier I installed the broadcom-wl and kmod-wl packages.
Output reads: 0c:00.0 Network controller [0280]: broadcom Corporation BCM4312 802.11b/g LP-PHY [14d4:4315] (rev 01) Kernel driver in use: b43-pci-bridge Kernel modules: ssb, wl
In that order.
Temlakos
On 18.06.2014 22:42, Temlakos wrote:
On 06/18/2014 04:37 PM, poma wrote:
On 18.06.2014 19:11, Temlakos wrote:
On 06/18/2014 12:05 PM, poma wrote:
On 18.06.2014 17:13, Temlakos wrote:
Everyone:
I have a three-year-old Dell Inspiron 1545. It came with the Dell Wireless 1397 WLAN Mini-Card.
The current output of lspci -k |grep -iA5 wire gives "Dell Wireless 1397 WLAN Mini-Card" as a subsystem. The relevant kernel module is "ssb."
$ lspci -k |grep -iA5 Usage: grep [OPTION]... PATTERN [FILE]... Try 'grep --help' for more information.
Currently this card will not connect. Nor can I force it to connect by directly editing the network interface. I've tried several times, but I can't get to a MAC address for it.
What driver(s) or other kernel module(s) should I install, and where can I get them?
Broadcom has a 32-bit and a 64-bit tarball for what they say is a driver for this card. Should I install that on my system?
Please advise. It seems a shame to operate any laptop without wireless connectivity.
Temlakos
The complete output of this command: $ lspci -knn | grep -A100 Wireless
poma
The output, after a couple of module installations, now reads:
Subsystem: Dell Wireless 1397 WLAN Mini-Card [1028:000c] Kernel driver in use: b43-pci-bridge Kernel modules: ssb, wl
Still no wireless connection available on that laptop.
Temlakos
Whence is "wl"?
OK, to get to Vendor&Device ID, hit this command: $ lspci -knn | grep -A10 BCM4312
Output could look like this: <bus>:<dev>.<func> Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01) Subsystem: Dell Wireless 1397 WLAN Mini-Card [1028:000c] Kernel driver in use: wl Kernel modules: wl, ssb
"ssb" is a specific bus module, i.e. "Sonics Silicon Backplane driver" Your "BCM4312" is attached to it.
BTW do you have the firmware installed?
poma
Earlier I installed the broadcom-wl and kmod-wl packages.
Output reads: 0c:00.0 Network controller [0280]: broadcom Corporation BCM4312 802.11b/g LP-PHY [14d4:4315] (rev 01) Kernel driver in use: b43-pci-bridge Kernel modules: ssb, wl
In that order.
Temlakos
So you are using the original Broadcom's module i.e. "wl", http://www.broadcom.com/support/802.11/linux_sta.php i.e. http://download1.rpmfusion.org/nonfree/fedora/updates/20/SRPMS/repoview/wl-k... Is that right?
However something there is not quite bright! The device is advertised as "broadcom", but if you are looking at hwdata databases i.e. $ grep ^14e4 /usr/share/hwdata/pci.ids 14e4 Broadcom Corporation $ grep ^14d4 /usr/share/hwdata/pci.ids 14d4 Panacom Technology Corp "14d4" is not a Broadcom's vendor ID i.e. "14e4"
If your device is advertised with "proper" vendor ID i.e. "14e4" it "should" be supported by "b43" module, http://wireless.kernel.org/en/users/Drivers/b43
And even with that, you should install the firmware, http://wireless.kernel.org/en/users/Drivers/b43#Device_firmware_installation $ man 1 b43-fwcutter $ less /usr/share/doc/b43-fwcutter/README.too http://wireless.kernel.org/en/users/Drivers/b43/developers
Perhaps the only problem is "wrong" vendor ID, but to conclude that you can play with the kernel's module source code or seek advice at http://wireless.kernel.org/en/users/Drivers/b43#Bug_reporting & http://vger.kernel.org/vger-lists.html#linux-wireless
poma
On 06/18/2014 05:37 PM, poma wrote:
On 18.06.2014 22:42, Temlakos wrote:
On 06/18/2014 04:37 PM, poma wrote:
On 18.06.2014 19:11, Temlakos wrote:
On 06/18/2014 12:05 PM, poma wrote:
On 18.06.2014 17:13, Temlakos wrote:
Everyone:
I have a three-year-old Dell Inspiron 1545. It came with the Dell Wireless 1397 WLAN Mini-Card.
The current output of lspci -k |grep -iA5 wire gives "Dell Wireless 1397 WLAN Mini-Card" as a subsystem. The relevant kernel module is "ssb."
$ lspci -k |grep -iA5 Usage: grep [OPTION]... PATTERN [FILE]... Try 'grep --help' for more information.
Currently this card will not connect. Nor can I force it to connect by directly editing the network interface. I've tried several times, but I can't get to a MAC address for it.
What driver(s) or other kernel module(s) should I install, and where can I get them?
Broadcom has a 32-bit and a 64-bit tarball for what they say is a driver for this card. Should I install that on my system?
Please advise. It seems a shame to operate any laptop without wireless connectivity.
Temlakos
The complete output of this command: $ lspci -knn | grep -A100 Wireless
poma
The output, after a couple of module installations, now reads:
Subsystem: Dell Wireless 1397 WLAN Mini-Card [1028:000c] Kernel driver in use: b43-pci-bridge Kernel modules: ssb, wl
Still no wireless connection available on that laptop.
Temlakos
Whence is "wl"?
OK, to get to Vendor&Device ID, hit this command: $ lspci -knn | grep -A10 BCM4312
Output could look like this: <bus>:<dev>.<func> Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01) Subsystem: Dell Wireless 1397 WLAN Mini-Card [1028:000c] Kernel driver in use: wl Kernel modules: wl, ssb
"ssb" is a specific bus module, i.e. "Sonics Silicon Backplane driver" Your "BCM4312" is attached to it.
BTW do you have the firmware installed?
poma
Earlier I installed the broadcom-wl and kmod-wl packages.
Output reads: 0c:00.0 Network controller [0280]: broadcom Corporation BCM4312 802.11b/g LP-PHY [14d4:4315] (rev 01) Kernel driver in use: b43-pci-bridge Kernel modules: ssb, wl
In that order.
Temlakos
So you are using the original Broadcom's module i.e. "wl", http://www.broadcom.com/support/802.11/linux_sta.php i.e. http://download1.rpmfusion.org/nonfree/fedora/updates/20/SRPMS/repoview/wl-k...
Is that right?
However something there is not quite bright! The device is advertised as "broadcom", but if you are looking at hwdata databases i.e. $ grep ^14e4 /usr/share/hwdata/pci.ids 14e4 Broadcom Corporation $ grep ^14d4 /usr/share/hwdata/pci.ids 14d4 Panacom Technology Corp "14d4" is not a Broadcom's vendor ID i.e. "14e4"
If your device is advertised with "proper" vendor ID i.e. "14e4" it "should" be supported by "b43" module, http://wireless.kernel.org/en/users/Drivers/b43
And even with that, you should install the firmware, http://wireless.kernel.org/en/users/Drivers/b43#Device_firmware_installation
$ man 1 b43-fwcutter $ less /usr/share/doc/b43-fwcutter/README.too http://wireless.kernel.org/en/users/Drivers/b43/developers
Perhaps the only problem is "wrong" vendor ID, but to conclude that you can play with the kernel's module source code or seek advice at http://wireless.kernel.org/en/users/Drivers/b43#Bug_reporting & http://vger.kernel.org/vger-lists.html#linux-wireless
poma
I apologize. I made a typographical error. That top line should end in "[14e4:4315] (rev 01).
I gather those commands give me a place to go to get the firmware and put it in. I never installed any firmware.
By the way: the Dell Inspiron 1545 has a button with a picture of a wireless antenna tower on it. I assume that works in the Windows environment to turn wireless connectivity on and off. Does it work at all in the Linux environment? Or may I safely ignore it? (It also functions as "F2" if I strike the blue "Fn" key first.)
Temlakos
On 06/19/14 18:55, Temlakos wrote:
By the way: the Dell Inspiron 1545 has a button with a picture of a wireless antenna tower on it. I assume that works in the Windows environment to turn wireless connectivity on and off. Does it work at all in the Linux environment? Or may I safely ignore it? (It also functions as "F2" if I strike the blue "Fn" key first.)
Don't know about your Dell....but on my Acer that switch is pretty much a "hardware" switch that seems to turn power on/off to the wireless card. So it matters not what OS is running.
On 06/19/2014 06:55 AM, Temlakos wrote:
I gather those commands give me a place to go to get the firmware and put it in. I never installed any firmware.
read what Poma said:
And even with that, you should install the firmware, http://wireless.kernel.org/en/users/Drivers/b43#Device_firmware_installation
$ man 1 b43-fwcutter $ less /usr/share/doc/b43-fwcutter/README.too http://wireless.kernel.org/en/users/Drivers/b43/developers
you need to install the b43-fwcutter firmware..
By the way: the Dell Inspiron 1545 has a button with a picture of a wireless antenna tower on it. I assume that works in the Windows environment to turn wireless connectivity on and off. Does it work at all in the Linux environment? Or may I safely ignore it? (It also functi
if you press the button to activate it, it should light up ( turn blue?) on my dell, there is a bunch of lights above the function keys that show ( left to right) disk activity, battery, then the wireless tower icon ( lit up, as I am using wireless)
On 19.06.2014 12:55, Temlakos wrote:
On 06/18/2014 05:37 PM, poma wrote:
On 18.06.2014 22:42, Temlakos wrote:
On 06/18/2014 04:37 PM, poma wrote:
On 18.06.2014 19:11, Temlakos wrote:
On 06/18/2014 12:05 PM, poma wrote:
On 18.06.2014 17:13, Temlakos wrote: > Everyone: > > I have a three-year-old Dell Inspiron 1545. It came with the Dell > Wireless 1397 WLAN Mini-Card. > > The current output of lspci -k |grep -iA5 wire gives "Dell Wireless > 1397 > WLAN Mini-Card" as a subsystem. The relevant kernel module is "ssb."
$ lspci -k |grep -iA5 Usage: grep [OPTION]... PATTERN [FILE]... Try 'grep --help' for more information.
> > Currently this card will not connect. Nor can I force it to > connect by > directly editing the network interface. I've tried several times, > but I > can't get to a MAC address for it. > > What driver(s) or other kernel module(s) should I install, and > where can > I get them? > > Broadcom has a 32-bit and a 64-bit tarball for what they say is a > driver > for this card. Should I install that on my system? > > Please advise. It seems a shame to operate any laptop without > wireless > connectivity. > > Temlakos >
The complete output of this command: $ lspci -knn | grep -A100 Wireless
poma
The output, after a couple of module installations, now reads:
Subsystem: Dell Wireless 1397 WLAN Mini-Card [1028:000c] Kernel driver in use: b43-pci-bridge Kernel modules: ssb, wl
Still no wireless connection available on that laptop.
Temlakos
Whence is "wl"?
OK, to get to Vendor&Device ID, hit this command: $ lspci -knn | grep -A10 BCM4312
Output could look like this: <bus>:<dev>.<func> Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01) Subsystem: Dell Wireless 1397 WLAN Mini-Card [1028:000c] Kernel driver in use: wl Kernel modules: wl, ssb
"ssb" is a specific bus module, i.e. "Sonics Silicon Backplane driver" Your "BCM4312" is attached to it.
BTW do you have the firmware installed?
poma
Earlier I installed the broadcom-wl and kmod-wl packages.
Output reads: 0c:00.0 Network controller [0280]: broadcom Corporation BCM4312 802.11b/g LP-PHY [14d4:4315] (rev 01) Kernel driver in use: b43-pci-bridge Kernel modules: ssb, wl
In that order.
Temlakos
So you are using the original Broadcom's module i.e. "wl", http://www.broadcom.com/support/802.11/linux_sta.php i.e. http://download1.rpmfusion.org/nonfree/fedora/updates/20/SRPMS/repoview/wl-k...
Is that right?
However something there is not quite bright! The device is advertised as "broadcom", but if you are looking at hwdata databases i.e. $ grep ^14e4 /usr/share/hwdata/pci.ids 14e4 Broadcom Corporation $ grep ^14d4 /usr/share/hwdata/pci.ids 14d4 Panacom Technology Corp "14d4" is not a Broadcom's vendor ID i.e. "14e4"
If your device is advertised with "proper" vendor ID i.e. "14e4" it "should" be supported by "b43" module, http://wireless.kernel.org/en/users/Drivers/b43
And even with that, you should install the firmware, http://wireless.kernel.org/en/users/Drivers/b43#Device_firmware_installation
$ man 1 b43-fwcutter $ less /usr/share/doc/b43-fwcutter/README.too http://wireless.kernel.org/en/users/Drivers/b43/developers
Perhaps the only problem is "wrong" vendor ID, but to conclude that you can play with the kernel's module source code or seek advice at http://wireless.kernel.org/en/users/Drivers/b43#Bug_reporting & http://vger.kernel.org/vger-lists.html#linux-wireless
poma
I apologize. I made a typographical error. That top line should end in "[14e4:4315] (rev 01).
I gather those commands give me a place to go to get the firmware and put it in. I never installed any firmware.
By the way: the Dell Inspiron 1545 has a button with a picture of a wireless antenna tower on it. I assume that works in the Windows environment to turn wireless connectivity on and off. Does it work at all in the Linux environment? Or may I safely ignore it? (It also functions as "F2" if I strike the blue "Fn" key first.)
Temlakos
The explanation could be found in the user manual, right? With a little salt and pepper. :)
It should be a switch actually associated with a BIOS that manages the connection and disconnection of wireless devices. It can be called a "hardware" part of the story. The other part of it is a "software" one, cause it can be managed in that way. When you combine these two i.e. hardware & software management, problem arises. You can read it yourself, all the logs related to the dell-laptop rfkill interface, https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/log/drivers/...
What you can try is apply the parameter of module with the value "enabled" adding it to the kernel command line: "dell-laptop.force_rfkill=1" If you ever need it.
Did you understood all the steps necessary for working wifi?
poma
On 06/19/2014 10:19 AM, poma wrote:
On 19.06.2014 12:55, Temlakos wrote:
On 06/18/2014 05:37 PM, poma wrote:
On 18.06.2014 22:42, Temlakos wrote:
On 06/18/2014 04:37 PM, poma wrote:
On 18.06.2014 19:11, Temlakos wrote:
On 06/18/2014 12:05 PM, poma wrote: > On 18.06.2014 17:13, Temlakos wrote: >> Everyone: >> >> I have a three-year-old Dell Inspiron 1545. It came with the Dell >> Wireless 1397 WLAN Mini-Card. >> >> The current output of lspci -k |grep -iA5 wire gives "Dell >> Wireless >> 1397 >> WLAN Mini-Card" as a subsystem. The relevant kernel module is >> "ssb." > > $ lspci -k |grep -iA5 > Usage: grep [OPTION]... PATTERN [FILE]... > Try 'grep --help' for more information. > >> >> Currently this card will not connect. Nor can I force it to >> connect by >> directly editing the network interface. I've tried several times, >> but I >> can't get to a MAC address for it. >> >> What driver(s) or other kernel module(s) should I install, and >> where can >> I get them? >> >> Broadcom has a 32-bit and a 64-bit tarball for what they say is a >> driver >> for this card. Should I install that on my system? >> >> Please advise. It seems a shame to operate any laptop without >> wireless >> connectivity. >> >> Temlakos >> > > The complete output of this command: > $ lspci -knn | grep -A100 Wireless > > > poma > > > >
The output, after a couple of module installations, now reads:
Subsystem: Dell Wireless 1397 WLAN Mini-Card [1028:000c] Kernel driver in use: b43-pci-bridge Kernel modules: ssb, wl
Still no wireless connection available on that laptop.
Temlakos
Whence is "wl"?
OK, to get to Vendor&Device ID, hit this command: $ lspci -knn | grep -A10 BCM4312
Output could look like this: <bus>:<dev>.<func> Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01) Subsystem: Dell Wireless 1397 WLAN Mini-Card [1028:000c] Kernel driver in use: wl Kernel modules: wl, ssb
"ssb" is a specific bus module, i.e. "Sonics Silicon Backplane driver" Your "BCM4312" is attached to it.
BTW do you have the firmware installed?
poma
Earlier I installed the broadcom-wl and kmod-wl packages.
Output reads: 0c:00.0 Network controller [0280]: broadcom Corporation BCM4312 802.11b/g LP-PHY [14d4:4315] (rev 01) Kernel driver in use: b43-pci-bridge Kernel modules: ssb, wl
In that order.
Temlakos
So you are using the original Broadcom's module i.e. "wl", http://www.broadcom.com/support/802.11/linux_sta.php i.e. http://download1.rpmfusion.org/nonfree/fedora/updates/20/SRPMS/repoview/wl-k...
Is that right?
However something there is not quite bright! The device is advertised as "broadcom", but if you are looking at hwdata databases i.e. $ grep ^14e4 /usr/share/hwdata/pci.ids 14e4 Broadcom Corporation $ grep ^14d4 /usr/share/hwdata/pci.ids 14d4 Panacom Technology Corp "14d4" is not a Broadcom's vendor ID i.e. "14e4"
If your device is advertised with "proper" vendor ID i.e. "14e4" it "should" be supported by "b43" module, http://wireless.kernel.org/en/users/Drivers/b43
And even with that, you should install the firmware, http://wireless.kernel.org/en/users/Drivers/b43#Device_firmware_installation
$ man 1 b43-fwcutter $ less /usr/share/doc/b43-fwcutter/README.too http://wireless.kernel.org/en/users/Drivers/b43/developers
Perhaps the only problem is "wrong" vendor ID, but to conclude that you can play with the kernel's module source code or seek advice at http://wireless.kernel.org/en/users/Drivers/b43#Bug_reporting & http://vger.kernel.org/vger-lists.html#linux-wireless
poma
I apologize. I made a typographical error. That top line should end in "[14e4:4315] (rev 01).
I gather those commands give me a place to go to get the firmware and put it in. I never installed any firmware.
By the way: the Dell Inspiron 1545 has a button with a picture of a wireless antenna tower on it. I assume that works in the Windows environment to turn wireless connectivity on and off. Does it work at all in the Linux environment? Or may I safely ignore it? (It also functions as "F2" if I strike the blue "Fn" key first.)
Temlakos
The explanation could be found in the user manual, right? With a little salt and pepper. :)
It should be a switch actually associated with a BIOS that manages the connection and disconnection of wireless devices. It can be called a "hardware" part of the story. The other part of it is a "software" one, cause it can be managed in that way. When you combine these two i.e. hardware & software management, problem arises. You can read it yourself, all the logs related to the dell-laptop rfkill interface, https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/log/drivers/...
What you can try is apply the parameter of module with the value "enabled" adding it to the kernel command line: "dell-laptop.force_rfkill=1" If you ever need it.
Did you understood all the steps necessary for working wifi?
poma
Well, when I block out enough time to do the job, I will move in this order: seek out and download a firmware package, run the commands listed in the manual and at the other site, and make sure of the rfkill interface. And if I still cannot connect, you know I'll be back here.
Thus far I've saved everything. I haven't had people answer me back so fast on a problem I ran into since I first signed on--thank you all. If this works, you'll have saved me about $500 US in getting another laptop. (Unless I can easily replace the hardware with something that obeys the open-hardware conventions of most wireless interfaces today. This is the only machine in which I even had to ask about wireless connectivity--I have a minitower with a wireless interface, that F20 found right away, found the service set, and asked me for the WPA password. Why can't all wireless interfaces behave this way, straight-out-of-the-box? Oh, well.)
Temlakos
On 19.06.2014 16:27, Temlakos wrote:
On 06/19/2014 10:19 AM, poma wrote:
On 19.06.2014 12:55, Temlakos wrote:
On 06/18/2014 05:37 PM, poma wrote:
On 18.06.2014 22:42, Temlakos wrote:
On 06/18/2014 04:37 PM, poma wrote:
On 18.06.2014 19:11, Temlakos wrote: > On 06/18/2014 12:05 PM, poma wrote: >> On 18.06.2014 17:13, Temlakos wrote: >>> Everyone: >>> >>> I have a three-year-old Dell Inspiron 1545. It came with the Dell >>> Wireless 1397 WLAN Mini-Card. >>> >>> The current output of lspci -k |grep -iA5 wire gives "Dell >>> Wireless >>> 1397 >>> WLAN Mini-Card" as a subsystem. The relevant kernel module is >>> "ssb." >> >> $ lspci -k |grep -iA5 >> Usage: grep [OPTION]... PATTERN [FILE]... >> Try 'grep --help' for more information. >> >>> >>> Currently this card will not connect. Nor can I force it to >>> connect by >>> directly editing the network interface. I've tried several times, >>> but I >>> can't get to a MAC address for it. >>> >>> What driver(s) or other kernel module(s) should I install, and >>> where can >>> I get them? >>> >>> Broadcom has a 32-bit and a 64-bit tarball for what they say is a >>> driver >>> for this card. Should I install that on my system? >>> >>> Please advise. It seems a shame to operate any laptop without >>> wireless >>> connectivity. >>> >>> Temlakos >>> >> >> The complete output of this command: >> $ lspci -knn | grep -A100 Wireless >> >> >> poma >> >> >> >> > > > The output, after a couple of module installations, now reads: > > Subsystem: Dell Wireless 1397 WLAN Mini-Card [1028:000c] > Kernel driver in use: b43-pci-bridge > Kernel modules: ssb, wl > > Still no wireless connection available on that laptop. > > Temlakos >
Whence is "wl"?
OK, to get to Vendor&Device ID, hit this command: $ lspci -knn | grep -A10 BCM4312
Output could look like this: <bus>:<dev>.<func> Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01) Subsystem: Dell Wireless 1397 WLAN Mini-Card [1028:000c] Kernel driver in use: wl Kernel modules: wl, ssb
"ssb" is a specific bus module, i.e. "Sonics Silicon Backplane driver" Your "BCM4312" is attached to it.
BTW do you have the firmware installed?
poma
Earlier I installed the broadcom-wl and kmod-wl packages.
Output reads: 0c:00.0 Network controller [0280]: broadcom Corporation BCM4312 802.11b/g LP-PHY [14d4:4315] (rev 01) Kernel driver in use: b43-pci-bridge Kernel modules: ssb, wl
In that order.
Temlakos
So you are using the original Broadcom's module i.e. "wl", http://www.broadcom.com/support/802.11/linux_sta.php i.e. http://download1.rpmfusion.org/nonfree/fedora/updates/20/SRPMS/repoview/wl-k...
Is that right?
However something there is not quite bright! The device is advertised as "broadcom", but if you are looking at hwdata databases i.e. $ grep ^14e4 /usr/share/hwdata/pci.ids 14e4 Broadcom Corporation $ grep ^14d4 /usr/share/hwdata/pci.ids 14d4 Panacom Technology Corp "14d4" is not a Broadcom's vendor ID i.e. "14e4"
If your device is advertised with "proper" vendor ID i.e. "14e4" it "should" be supported by "b43" module, http://wireless.kernel.org/en/users/Drivers/b43
And even with that, you should install the firmware, http://wireless.kernel.org/en/users/Drivers/b43#Device_firmware_installation
$ man 1 b43-fwcutter $ less /usr/share/doc/b43-fwcutter/README.too http://wireless.kernel.org/en/users/Drivers/b43/developers
Perhaps the only problem is "wrong" vendor ID, but to conclude that you can play with the kernel's module source code or seek advice at http://wireless.kernel.org/en/users/Drivers/b43#Bug_reporting & http://vger.kernel.org/vger-lists.html#linux-wireless
poma
I apologize. I made a typographical error. That top line should end in "[14e4:4315] (rev 01).
I gather those commands give me a place to go to get the firmware and put it in. I never installed any firmware.
By the way: the Dell Inspiron 1545 has a button with a picture of a wireless antenna tower on it. I assume that works in the Windows environment to turn wireless connectivity on and off. Does it work at all in the Linux environment? Or may I safely ignore it? (It also functions as "F2" if I strike the blue "Fn" key first.)
Temlakos
The explanation could be found in the user manual, right? With a little salt and pepper. :)
It should be a switch actually associated with a BIOS that manages the connection and disconnection of wireless devices. It can be called a "hardware" part of the story. The other part of it is a "software" one, cause it can be managed in that way. When you combine these two i.e. hardware & software management, problem arises. You can read it yourself, all the logs related to the dell-laptop rfkill interface, https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/log/drivers/...
What you can try is apply the parameter of module with the value "enabled" adding it to the kernel command line: "dell-laptop.force_rfkill=1" If you ever need it.
Did you understood all the steps necessary for working wifi?
poma
Well, when I block out enough time to do the job, I will move in this order: seek out and download a firmware package, run the commands listed in the manual and at the other site, and make sure of the rfkill interface. And if I still cannot connect, you know I'll be back here.
Thus far I've saved everything. I haven't had people answer me back so fast on a problem I ran into since I first signed on--thank you all. If this works, you'll have saved me about $500 US in getting another laptop. (Unless I can easily replace the hardware with something that obeys the open-hardware conventions of most wireless interfaces today. This is the only machine in which I even had to ask about wireless connectivity--I have a minitower with a wireless interface, that F20 found right away, found the service set, and asked me for the WPA password. Why can't all wireless interfaces behave this way, straight-out-of-the-box? Oh, well.)
Temlakos
Someone might ask the same question to you. :) Here you are in the FOSS world.
poma
On 06/19/2014 07:19 AM, poma issued this missive:
On 19.06.2014 12:55, Temlakos wrote:
...
By the way: the Dell Inspiron 1545 has a button with a picture of a wireless antenna tower on it. I assume that works in the Windows environment to turn wireless connectivity on and off. Does it work at all in the Linux environment? Or may I safely ignore it? (It also functions as "F2" if I strike the blue "Fn" key first.)
Temlakos
The explanation could be found in the user manual, right? With a little salt and pepper. :)
On my Inspiron N7110, that key does work under F20/XFCE. It functions as the "F2" key if pressed alone.
To toggle the wireless, you have to hold down the "Fn" key and press F2. The same holds with the other F keys (they're function keys alone, to use the alternate functions you have to hold down "Fn" while pressing them). At least the screen switch, volume controls and keypad on/off seems to work. ---------------------------------------------------------------------- - Rick Stevens, Systems Engineer, AllDigital ricks@alldigital.com - - AIM/Skype: therps2 ICQ: 22643734 Yahoo: origrps2 - - - - When you don't know what to do, walk fast and look worried. - ----------------------------------------------------------------------
On 6/18/14, 11:13 AM, Temlakos wrote:
Everyone:
I have a three-year-old Dell Inspiron 1545. It came with the Dell Wireless 1397 WLAN Mini-Card.
The current output of lspci -k |grep -iA5 wire gives "Dell Wireless 1397 WLAN Mini-Card" as a subsystem. The relevant kernel module is "ssb."
Currently this card will not connect. Nor can I force it to connect by directly editing the network interface. I've tried several times, but I can't get to a MAC address for it.
What driver(s) or other kernel module(s) should I install, and where can I get them?
Broadcom has a 32-bit and a 64-bit tarball for what they say is a driver for this card. Should I install that on my system?
Please advise. It seems a shame to operate any laptop without wireless connectivity.
Temlakos
In my experience most Dell branded wireless cards have a broadcom chipset.
On 06/19/2014 10:49 AM, poma wrote:
On 19.06.2014 16:27, Temlakos wrote:
On 06/19/2014 10:19 AM, poma wrote:
On 19.06.2014 12:55, Temlakos wrote:
On 06/18/2014 05:37 PM, poma wrote:
On 18.06.2014 22:42, Temlakos wrote:
On 06/18/2014 04:37 PM, poma wrote: > On 18.06.2014 19:11, Temlakos wrote: >> On 06/18/2014 12:05 PM, poma wrote: >>> On 18.06.2014 17:13, Temlakos wrote: >>>> Everyone: >>>> >>>> I have a three-year-old Dell Inspiron 1545. It came with the >>>> Dell >>>> Wireless 1397 WLAN Mini-Card. >>>> >>>> The current output of lspci -k |grep -iA5 wire gives "Dell >>>> Wireless >>>> 1397 >>>> WLAN Mini-Card" as a subsystem. The relevant kernel module is >>>> "ssb." >>> >>> $ lspci -k |grep -iA5 >>> Usage: grep [OPTION]... PATTERN [FILE]... >>> Try 'grep --help' for more information. >>> >>>> >>>> Currently this card will not connect. Nor can I force it to >>>> connect by >>>> directly editing the network interface. I've tried several >>>> times, >>>> but I >>>> can't get to a MAC address for it. >>>> >>>> What driver(s) or other kernel module(s) should I install, and >>>> where can >>>> I get them? >>>> >>>> Broadcom has a 32-bit and a 64-bit tarball for what they say >>>> is a >>>> driver >>>> for this card. Should I install that on my system? >>>> >>>> Please advise. It seems a shame to operate any laptop without >>>> wireless >>>> connectivity. >>>> >>>> Temlakos >>>> >>> >>> The complete output of this command: >>> $ lspci -knn | grep -A100 Wireless >>> >>> >>> poma >>> >>> >>> >>> >> >> >> The output, after a couple of module installations, now reads: >> >> Subsystem: Dell Wireless 1397 WLAN Mini-Card [1028:000c] >> Kernel driver in use: b43-pci-bridge >> Kernel modules: ssb, wl >> >> Still no wireless connection available on that laptop. >> >> Temlakos >> > > Whence is "wl"? > > OK, to get to Vendor&Device ID, hit this command: > $ lspci -knn | grep -A10 BCM4312 > > Output could look like this: > <bus>:<dev>.<func> Network controller [0280]: Broadcom Corporation > BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01) > Subsystem: Dell Wireless 1397 WLAN Mini-Card [1028:000c] > Kernel driver in use: wl > Kernel modules: wl, ssb > > "ssb" is a specific bus module, i.e. "Sonics Silicon Backplane > driver" > Your "BCM4312" is attached to it. > > BTW do you have the firmware installed? > > > poma > > > > >
Earlier I installed the broadcom-wl and kmod-wl packages.
Output reads: 0c:00.0 Network controller [0280]: broadcom Corporation BCM4312 802.11b/g LP-PHY [14d4:4315] (rev 01) Kernel driver in use: b43-pci-bridge Kernel modules: ssb, wl
In that order.
Temlakos
So you are using the original Broadcom's module i.e. "wl", http://www.broadcom.com/support/802.11/linux_sta.php i.e. http://download1.rpmfusion.org/nonfree/fedora/updates/20/SRPMS/repoview/wl-k...
Is that right?
However something there is not quite bright! The device is advertised as "broadcom", but if you are looking at hwdata databases i.e. $ grep ^14e4 /usr/share/hwdata/pci.ids 14e4 Broadcom Corporation $ grep ^14d4 /usr/share/hwdata/pci.ids 14d4 Panacom Technology Corp "14d4" is not a Broadcom's vendor ID i.e. "14e4"
If your device is advertised with "proper" vendor ID i.e. "14e4" it "should" be supported by "b43" module, http://wireless.kernel.org/en/users/Drivers/b43
And even with that, you should install the firmware, http://wireless.kernel.org/en/users/Drivers/b43#Device_firmware_installation
$ man 1 b43-fwcutter $ less /usr/share/doc/b43-fwcutter/README.too http://wireless.kernel.org/en/users/Drivers/b43/developers
Perhaps the only problem is "wrong" vendor ID, but to conclude that you can play with the kernel's module source code or seek advice at http://wireless.kernel.org/en/users/Drivers/b43#Bug_reporting & http://vger.kernel.org/vger-lists.html#linux-wireless
poma
I apologize. I made a typographical error. That top line should end in "[14e4:4315] (rev 01).
I gather those commands give me a place to go to get the firmware and put it in. I never installed any firmware.
By the way: the Dell Inspiron 1545 has a button with a picture of a wireless antenna tower on it. I assume that works in the Windows environment to turn wireless connectivity on and off. Does it work at all in the Linux environment? Or may I safely ignore it? (It also functions as "F2" if I strike the blue "Fn" key first.)
Temlakos
The explanation could be found in the user manual, right? With a little salt and pepper. :)
It should be a switch actually associated with a BIOS that manages the connection and disconnection of wireless devices. It can be called a "hardware" part of the story. The other part of it is a "software" one, cause it can be managed in that way. When you combine these two i.e. hardware & software management, problem arises. You can read it yourself, all the logs related to the dell-laptop rfkill interface, https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/log/drivers/...
What you can try is apply the parameter of module with the value "enabled" adding it to the kernel command line: "dell-laptop.force_rfkill=1" If you ever need it.
Did you understood all the steps necessary for working wifi?
poma
Well, when I block out enough time to do the job, I will move in this order: seek out and download a firmware package, run the commands listed in the manual and at the other site, and make sure of the rfkill interface. And if I still cannot connect, you know I'll be back here.
Thus far I've saved everything. I haven't had people answer me back so fast on a problem I ran into since I first signed on--thank you all. If this works, you'll have saved me about $500 US in getting another laptop. (Unless I can easily replace the hardware with something that obeys the open-hardware conventions of most wireless interfaces today. This is the only machine in which I even had to ask about wireless connectivity--I have a minitower with a wireless interface, that F20 found right away, found the service set, and asked me for the WPA password. Why can't all wireless interfaces behave this way, straight-out-of-the-box? Oh, well.)
Temlakos
Someone might ask the same question to you. :) Here you are in the FOSS world.
poma
Finally found time to get the firmware and cut it in.
As soon as I did that, and did a few modprobe commands, the system started sniffing for wireless connections.
I added a connection with ESSID and password.
Then I pulled the plug on the wired connection.
A minute or two later, the wireless card found my home service set and connected.
Now I have a laptop that works properly.
It also keeps working after a restart.
Thank you all for your advice.
Temlakos
-
Ed Greshko -
max -
Paul Cartwright -
poma -
Rick Stevens -
Temlakos