On Wed, 30 Aug 2023 00:38:08 +0100
Paul Smith <phhs80(a)gmail.com> wrote:
Maybe the following is relevant:
----------------------------
# dracut --force --kver 6.4.12-200.fc38.x86_64 --verbose
dracut: Executing: /usr/bin/dracut --force --kver
6.4.12-200.fc38.x86_64 --verbose
dracut: dracut module 'busybox' will not be installed, because command
'busybox' could not be found!
dracut: dracut module 'connman' will not be installed, because command
'connmand' could not be found!
dracut: dracut module 'connman' will not be installed, because command
'connmanctl' could not be found!
dracut: dracut module 'connman' will not be installed, because command
'connmand-wait-online' could not be found!
I see the connman errors when I
build the initramfs, but it works fine.
dracut: dracut module 'network-wicked' will not be installed,
because
command 'wicked' could not be found!
dracut: dracut module 'biosdevname' will not be installed, because
command 'biosdevname' could not be found!
dracut: dracut module 'busybox' will not be installed, because command
'busybox' could not be found!
dracut: dracut module 'connman' will not be installed, because command
'connmand' could not be found!
dracut: dracut module 'connman' will not be installed, because command
'connmanctl' could not be found!
dracut: dracut module 'connman' will not be installed, because command
'connmand-wait-online' could not be found!
dracut: dracut module 'network-wicked' will not be installed, because
command 'wicked' could not be found!
I think these can be taken as warnings
rather than errors, unless you
are using busybox or network-wicked in the suspended version.
dracut: *** Including module: bash ***
dracut: *** Including module: systemd ***
dracut: *** Including module: systemd-initrd ***
dracut: *** Including module: systemd-sysusers ***
dracut: *** Including module: nss-softokn ***
dracut: *** Including module: dbus-broker ***
dracut: *** Including module: rngd ***
dracut: *** Including module: dbus ***
dracut: *** Including module: i18n ***
dracut: *** Including module: network-manager ***
dracut: *** Including module: network ***
dracut: *** Including module: ifcfg ***
dracut: *** Including module: drm ***
dracut: *** Including module: plymouth ***
dracut: *** Including module: dm ***
dracut: Skipping udev rule: 64-device-mapper.rules
dracut: Skipping udev rule: 60-persistent-storage-dm.rules
dracut: Skipping udev rule: 55-dm.rules
dracut: *** Including module: kernel-modules ***
dracut: *** Including module: kernel-modules-extra ***
dracut: *** Including module: kernel-network-modules ***
dracut: *** Including module: lvm ***
dracut: Skipping udev rule: 64-device-mapper.rules
dracut: Skipping udev rule: 56-lvm.rules
dracut: Skipping udev rule: 60-persistent-storage-lvm.rules
dracut: *** Including module: resume ***
dracut: *** Including module: rootfs-block ***
dracut: *** Including module: terminfo ***
dracut: *** Including module: udev-rules ***
dracut: Skipping udev rule: 40-redhat.rules
dracut: Skipping udev rule: 50-firmware.rules
dracut: Skipping udev rule: 50-udev.rules
dracut: Skipping udev rule: 91-permissions.rules
dracut: Skipping udev rule: 80-drivers-modprobe.rules
dracut: Skipping udev rule: 70-persistent-net.rules
dracut: *** Including module: dracut-systemd ***
dracut: *** Including module: usrmount ***
dracut: *** Including module: base ***
dracut: *** Including module: fs-lib ***
dracut: *** Including module: memstrack ***
dracut: *** Including module: shutdown ***
dracut: *** Including modules done ***
dracut: *** Installing kernel module dependencies ***
dracut: *** Installing kernel module dependencies done ***
dracut: *** Resolving executable dependencies ***
dracut: *** Resolving executable dependencies done ***
dracut: *** Hardlinking files ***
dracut: Mode: real
dracut: Method: sha256
dracut: Files: 2153
dracut: Linked: 81 files
dracut: Compared: 0 xattrs
dracut: Compared: 974 files
dracut: Saved: 563.14 KiB
dracut: Duration: 0.057574 seconds
dracut: *** Hardlinking files done ***
dracut: *** Generating early-microcode cpio image ***
dracut: *** Constructing AuthenticAMD.bin ***
dracut: *** Store current command line parameters ***
dracut: *** Stripping files ***
dracut: *** Stripping files done ***
dracut: *** Creating image file
'/boot/initramfs-6.4.12-200.fc38.x86_64.img' *** dracut: Using
auto-determined compression method 'pigz' dracut: *** Creating
initramfs image file '/boot/initramfs-6.4.12-200.fc38.x86_64.img'
done *** #
This all looks fine. The journalctl log you posted showed that the
initramfs was working properly, and was able to start systemd to do the
actual boot. It only failed at verifying that the os you were trying to
start was legitimate.
Given the fact that an older kernel works, but a newer one doesn't, it
sure seems like it is somehow related to the kernel. Since the same
version of systemd works on an old kernel, it is unlikely to be
systemd. Maybe you should change the bugzilla to point to the
kernel. You could also look through the kernel updates at
https://lkml.org/ to see if there is one related to warm restarts. I
think that might also be called suspend. There are lot of updates,
though, so this is a significant task.