an f10 install, minimum defaults from purchased dvd.
Only sda1 is formatted by installer; /boot not a separate partition.
Grub initially installed into 1st sector of sda1, left mbr alone.
Later Grub also installed into mbr of sda.
Currently booting into level 3, experiencing trouble with X-server
In a prior thread, Re: f10dvd installs but won't boot,
David wrote:
Many people on this list will have much greater expertise than I to
solve your X problem. My *non-expert* suggestions are that you could:
1) yum update xorg-x11-drv-mga
no help, nothing to update
5) Look at the xorg.conf of your previous Fedora install for ideas,
if
it is working ok on the same hardware.
yes, it is.
6) Try to create your own xorg.conf based on it and/or your tmp
ones.
Your xorg.log seems to be using the correct driver but reports "No
monitor specified", you could try adding a "Monitor" block to your
xorg.conf, particularly if you have one that works for your previous
Fedora. I've had to do similar in the past.
Adding just the Monitor section seemed to work, at least initially:
------start of xorg.conf------------------
# Xorg configuration created by pyxf86config
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "InputDevice"
# keyboard added by rhpxl
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105+inet"
Option "XkbLayout" "us"
EndSection
## monitor section from fc5 xorg.conf
Section "Monitor"
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "NEC MultiSync LCD1830"
DisplaySize 360 290
HorizSync 24.0 - 82.0
VertRefresh 55.0 - 85.0
Option "dpms"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "mga"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
----------end of xorg.conf---------
Now seems caught in some sort of mix of errors from
X server, Window manager, startx:
[root@localhost ~]# system-config-display -v
Read configuration file /etc/xorg.conf
Trying with card: u'Matrox Graphics, Inc. MGA G550 AGP'
Writing temporary config file to /tmp/tmpNdA6Fexorg.config
Trying to start X server
Waiting for X server to start...log located in /var/log/Xorg.setup.log
1...2...3...4...5....X server started successfully.
Backing up /etc/xorg.conf to /etc/xorg.conf.backup
Writing configuration to /etc/xorg.conf
Removing old /etc/X11/X
Creating /etc/X11/X symlink
Window manager warning: Fatal IO error 104 (Connection reset by peer)
on display ':17.0'.
[root@localhost ~]#
it says "X server started successfully"
but then " Fatal IO error 104 (Connection reset by peer) on display
':17.0'."
With that error, it may be silly to try startx, but i did anyway:
]# cat startxlog
[root@localhost ~]# startx
xauth: creating new authority file /root/.serverauth.3606
xauth: creating new authority file /root/.Xauthority
xauth: creating new authority file /root/.Xauthority
Fatal server error:
Server is already active for display 0
If this server is no longer running, remove /tmp/.X0-lock
and start again.
Invalid MIT-MAGIC-COOKIE-1 keygiving up.
xinit: Interrupted system call (errno 4): unable to connect to X server
xinit: No such process (errno 3): Server error.
[root@localhost ~]#
rm .X0-lock
then another
startx
# cat startxlog2
[root@localhost ~]# startx
xauth: creating new authority file /root/.serverauth.3633
_XSERVTransSocketUNIXCreateListener: ...SocketCreateListener() failed
_XSERVTransMakeAllCOTSServerListeners: server already running
Fatal server error:
Cannot establish any listening sockets - Make sure an X server isn't
already running
xinit: Server error.
[root@localhost ~]#
[root@bootp root]# ls -l X*
-rw-r--r-- 1 root root 43222 May 8 09:28 Xorg.0.log
-rw-r--r-- 1 root root 743 May 10 09:26 Xorg.setup.log.may10
why no current(may 10) Xorg log?
[root@bootp root]# cat Xorg.setup.log.may10
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.18-128.1.1.el5 i686
Current Operating System: Linux localhost.localdomain
2.6.27.21-170.2.56.fc10.i686 #1 SMP Mon Mar 23 23:37:54 EDT 2009 i686
Build Date: 10 March 2009 07:20:48PM
Build ID: xorg-x11-server 1.5.3-15.fc10
Before reporting problems, check
http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(++) Log file: "/dev/null", Time: Sun May 10 07:56:43 2009
(++) Using config file: "/tmp/tmpNdA6Fexorg.config"
[root@bootp root]#
no errors seen from this setup log
I have done some googling on the Window manager error 104 but so far
no help to me.
Further steps?
Jack