On Sun, 16 Feb 2020 17:30:08 +0100 "Patrick Dupre" wrote:
>>> I suspect that you have specified the 3022 port fo connect to euripide
>>> in your ~/.ssh/config file.
>> We should focus on runing vncviewer from the client machine to
>> euripide (running vncserver vith vncserver@:1.service)
> Of course, I opened port 1 on euripide and port 9 on the other one
> (no name, it is why I use the ip address)
Ok.
>> No answer to that point :-(
> yes, because I do not have a ssh/config file
I don't understand thus where this 3022 port came from.
/etc/services ?
csregagent 3022/tcp # CSREGAGENT
>>> The port 9 is that that I use for remmina
>> Does this means that you change the way of starting vncserver and that
>> you start it now with:
>> systemctl start vncserver@:9.service
> No,
No on euridice, but vncserver@:9.service on the other one right?
> Here, I do not understand. This is what I get on both machines
> systemctl start vncserver@:1.service
> ==== AUTHENTICATION COMPLETE ====
Weird message: AUTHENTICATION COMPLETE
> systemctl status vncserver@:1.service
> ● vncserver@:1.service - Remote desktop service (VNC)
> Loaded: loaded (/etc/systemd/system/vncserver@.service; disabled; vendor preset:
disabl>
> Active: failed (Result: exit-code) since Sun 2020-02-16 17:18:39 CET; 3min 27s
ago
> Process: 11175 ExecStartPre=/bin/sh -c /usr/bin/vncserver -kill :1 > /dev/null
2>&1 || :>
> Process: 11177 ExecStart=/usr/bin/vncserver_wrapper pdupre :1 (code=exited,
status=2)
> Main PID: 11177 (code=exited, status=2)
> Feb 16 17:18:39 euripide systemd[1]: Starting Remote desktop service (VNC)...
> Feb 16 17:18:39 euripide systemd[1]: Started Remote desktop service (VNC).
> Feb 16 17:18:39 euripide vncserver_wrapper[11177]: A VNC server is already running
as :1
> Feb 16 17:18:39 euripide vncserver_wrapper[11177]: FATAL: 'runuser -l
pdupre' failed!
> Feb 16 17:18:39 euripide systemd[1]: vncserver@:1.service: Main process exited,
code=exite>
> Feb 16 17:18:39 euripide systemd[1]: vncserver@:1.service: Failed with result
'exit-code'.
On euridice, can you identify the process running on port 5901?
lsof -i tcp:5901
lsof -i tcp:5901
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
Xvnc 10283 pdupre 6u IPv4 203381 0t0 TCP *:5901 (LISTEN)
Xvnc 10283 pdupre 7u IPv6 203382 0t0 TCP *:5901 (LISTEN)
>>> the ~/.vnc/xstartup file is the same on both machine
>> What do you start in it?
> I check because on one of the machine, remmina gives me a blue
> screen only, while the other one provides me the expected screen
> (gnome).
I have seen failures to spawn two cinnamon sessions at the same time
(for the same user): a native one and a VNC one. This is perhaps the
same with gnome. To investigate after having fixed the failure of
vncserver@:1.service on euridice.
This I have no idea
On euripide:
systemctl status vncserver@:1.service
● vncserver@:1.service - Remote desktop service (VNC)
Loaded: loaded (/etc/systemd/system/vncserver@.service; disabled; vendor preset:
disabled)
Active: failed (Result: exit-code) since Sun 2020-02-16 17:24:17 CET; 1h 57min ago
Process: 11248 ExecStartPre=/bin/sh -c /usr/bin/vncserver -kill :1 > /dev/null
2>&1 || : (code=exited, status=0/SUCCESS)
Process: 11250 ExecStart=/usr/bin/vncserver_wrapper pdupre :1 (code=exited, status=2)
Main PID: 11250 (code=exited, status=2)
Feb 16 17:24:17 euripide systemd[1]: Starting Remote desktop service (VNC)...
Feb 16 17:24:17 euripide systemd[1]: Started Remote desktop service (VNC).
Feb 16 17:24:17 euripide vncserver_wrapper[11250]: A VNC server is already running as :1
Feb 16 17:24:17 euripide vncserver_wrapper[11250]: FATAL: 'runuser -l pdupre'
failed!
Feb 16 17:24:17 euripide systemd[1]: vncserver@:1.service: Main process exited,
code=exited, status=2/INVALIDARGUMENT
Feb 16 17:24:17 euripide systemd[1]: vncserver@:1.service: Failed with result
'exit-code'.
on the other one:
systemctl status vncserver@:9.service
● vncserver@:9.service - Remote desktop service (VNC)
Loaded: loaded (/usr/lib/systemd/system/vncserver@.service; disabled; vendor preset:
disabled)
Active: inactive (dead)
In addition, what is your remmina setup? Not using SSH I guess.
I always run remmina in
VNC viewer mode, in ssh tunnel
>
> --
> francis
> _______________________________________________
> users mailing list -- users(a)lists.fedoraproject.org
> To unsubscribe send an email to users-leave(a)lists.fedoraproject.org
> Fedora Code of Conduct:
https://docs.fedoraproject.org/en-US/project/code-of-conduct/
> List Guidelines:
https://fedoraproject.org/wiki/Mailing_list_guidelines
> List Archives:
https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org
>