2:42 p.m.
after two hours of operation my Fedora 15 shuts down and system reboots
byitself suddenly: I was thinking that it was at the end of his life,
but I noticed after rebooting that I was already logged as user and I
got a message about Selinux stating that some cups/backend/hp could not
write somewhere (I deleted the message by mistake).Any comment?
--
Antonio
--------------------------------------------
Prima di stampare pensa all'ambiente
Think about environment before printing
Skype: amontag52
Linux Fedora 15 Lovelock on Casa
Linux user number 362582
http://www.campingmonterosa.com
http://www.studiodacolpaloschi.it
-------------------------------------------
11:57 a.m.
Ed Greshko ha scritto / said the following il giorno/on 22/09/2011 22:35:
On 09/23/2011 03:42 AM, antonio montagnani wrote:
> after two hours of operation my Fedora 15 shuts down and system reboots
> byitself suddenly: I was thinking that it was at the end of his life,
> but I noticed after rebooting that I was already logged as user and I
> got a message about Selinux stating that some cups/backend/hp could not
> write somewhere (I deleted the message by mistake).Any comment?
FWIW, several years ago I had a system that would spontaneously
"reboot". More accurately, crash/restart. Nothing in the logs revealed
anything of value. After a week of this, it finally crashed and stayed
crashed. The culprit was the power supply.
FYI
I changed the PSU (Power supply unit) and I am testing: so far no reboots.
Tnx
--
Antonio
--------------------------------------------
Prima di stampare pensa all'ambiente
Think about environment before printing
Skype: amontag52
Linux Fedora 15 Lovelock on Casa
Linux user number 362582
http://www.campingmonterosa.com
http://www.studiodacolpaloschi.it
-------------------------------------------
3:13 p.m.
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On 09/22/2011 04:08 PM, antonio montagnani wrote:
Daniel J Walsh ha scritto / said the following il giorno/on
22/09/2011 21:56: On 09/22/2011 03:42 PM, antonio montagnani
wrote:
>>> after two hours of operation my Fedora 15 shuts down and
>>> system reboots byitself suddenly: I was thinking that it was
>>> at the end of his life, but I noticed after rebooting that I
>>> was already logged as user and I got a message about Selinux
>>> stating that some cups/backend/hp could not write somewhere
>>> (I deleted the message by mistake).Any comment?
Sounds like a kernel issue or hardware, overheating. I doubt this
is an SELinux issue. I would look in the /var/log/messages for
indication of why the system is going down.
This is tthe kernel message about Selinux:
> SELinux is preventing /usr/lib/cups/backend/hp from read access
> on the chr_file 044. For complete SELinux messages. run sealert
> -l b826ab3e-5b7c-4b13-84b3-cfa77eb8e7b2
and this is the messages file and the crash happened between these
lines
> Sep 22 20:42:10 localhost python: io/hpmud/pp.c 627: unable to
> read device-id ret=-1 Sep 22 20:42:10 localhost
> udev-configure-printer: no corresponding CUPS device found Sep 22
> 20:42:12 localhost setroubleshoot: SELinux is preventing
> /usr/lib/cups/backend/hp from read access on the chr_file 044.
> For complete SELinux messages. run sealert -l
> b826ab3e-5b7c-4b13-84b3-cfa77eb8e7b2 Sep 22 20:42:14 localhost
> setroubleshoot: SELinux is preventing /usr/lib/cups/backend/hp
> from read access on the chr_file 044. For complete SELinux
> messages. run sealert -l b826ab3e-5b7c-4b13-84b3-cfa77eb8e7b2 Sep
> 22 20:49:30 localhost kernel: [ 5538.231226] [drm] nouveau
> 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) Sep
> 22 21:04:25 localhost kernel: [ 6433.067959] [drm] nouveau
> 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) Sep
> 22 21:09:15 localhost dbus: [system] Activating service
> name='org.freedesktop.PackageKit' (using servicehelper) Sep 22
> 21:09:15 localhost dbus: [system] Successfully activated service
> 'org.freedesktop.PackageKit' Sep 22 21:12:06 localhost kernel: [
> 6894.301934] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on
> vga encoder (output 0) Sep 22 21:18:39 localhost kernel: imklog
> 5.8.2, log source = /proc/kmsg started. Sep 22 21:18:39 localhost
> rsyslogd: [origin software="rsyslogd" swVersion="5.8.2"
> x-pid="739" x-info="http://www.rsyslog.com"] start Sep 22
> 21:18:39 localhost kernel: [ 0.000000] Initializing cgroup
> subsys cpuset Sep 22 21:18:39 localhost kernel: [ 0.000000]
> Initializing cgroup subsys cpu Sep 22 21:18:39 localhost kernel:
> [ 0.000000] Linux version 2.6.40.4-5.fc15.i686.PAE
> (mockbuild(a)x86-14.phx2.fedoraproject.org) (gcc version 4.6.0
> 20110603 (Red Hat 4.6.0-10) (GCC) ) #1 SMP Tue Aug 30 14:43:52
> UTC 2011 Sep 22 21:18:39 localhost kernel: [ 0.000000]
> BIOS-provided physical RAM map: Sep 22 21:18:39 localhost kernel:
> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00
> (usable) Sep 22 21:18:39 localhost kernel: [ 0.000000]
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) Sep 22
> 21:18:39 localhost kernel: [ 0.000000] BIOS-e820:
> 00000000000e0000 - 0000000000100000 (reserved)
butfrom sensors I get
> sensors atk0110-acpi-0 Adapter: ACPI interface Vcore Voltage:
> +1.37 V (min = +1.45 V, max = +1.75 V) +3.3 Voltage:
> +1.60 V (min = +3.00 V, max = +3.60 V) +5.0 Voltage:
> +1.62 V (min = +4.50 V, max = +5.50 V) +12.0 Voltage:
> +11.98 V (min = +11.20 V, max = +13.20 V) CPU FAN Speed:
> 3068 RPM (min = 0 RPM) CHASSIS FAN Speed: 2410 RPM (min =
> 0 RPM) CPU Temperature: +50.0°C (high = +90.0°C, crit =
> +125.0°C) MB Temperature: +46.0°C (high = +70.0°C, crit =
> +125.0°C) Power Temperature: +123.0°C (high = +80.0°C, crit =
> +125.0°C)
>
> w83627ehf-isa-0290 Adapter: ISA adapter Vcore: +1.37 V
> (min = +0.00 V, max = +1.85 V) in1: +1.82 V (min =
> +0.00 V, max = +0.03 V) ALARM AVCC: +3.22 V (min =
> +0.00 V, max = +0.00 V) ALARM +3.3V: +3.20 V (min =
> +0.00 V, max = +0.06 V) ALARM in4: +2.04 V (min =
> +0.00 V, max = +0.00 V) ALARM in5: +1.62 V (min =
> +0.00 V, max = +0.00 V) ALARM in6: +1.97 V (min =
> +0.00 V, max = +0.00 V) ALARM 3VSB: +3.18 V (min =
> +0.00 V, max = +0.00 V) ALARM Vbat: +0.00 V (min =
> +0.00 V, max = +0.00 V) in9: +1.35 V (min = +0.00 V,
> max = +0.00 V) ALARM fan1: 2410 RPM (min = 168750 RPM,
> div = 4) ALARM fan2: 3068 RPM (min = 0 RPM, div = 2)
> ALARM fan3: 0 RPM (min = 164 RPM, div = 128) ALARM
> fan5: 0 RPM (min = 0 RPM, div = 4) temp1:
> +46.0°C (high = +0.0°C, hyst = +0.0°C) ALARM sensor =
> thermistor temp2: +50.0°C (high = +80.0°C, hyst =
> +75.0°C) sensor = diode temp3: +123.5°C (high = +80.0°C,
> hyst = +75.0°C) ALARM sensor = thermistor
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iEYEARECAAYFAk57ltEACgkQrlYvE4MpobOengCfXd1zQsSS3nFkt+WS1X6FTmeu
YHcAnjTbMiwJ0MJJ5L+PPBsVzL82LEXv
=UgVD
-----END PGP SIGNATURE-----
3:08 p.m.
Daniel J Walsh ha scritto / said the following il giorno/on
22/09/2011 21:56:
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On 09/22/2011 03:42 PM, antonio montagnani wrote:
> after two hours of operation my Fedora 15 shuts down and system
> reboots byitself suddenly: I was thinking that it was at the end of
> his life, but I noticed after rebooting that I was already logged
> as user and I got a message about Selinux stating that some
> cups/backend/hp could not write somewhere (I deleted the message by
> mistake).Any comment?
Sounds like a kernel issue or hardware, overheating. I doubt this is
an SELinux issue. I would look in the /var/log/messages for
indication of why the system is going down.
This is tthe kernel message about Selinux:
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iEYEARECAAYFAk57kv8ACgkQrlYvE4MpobNWsQCggIw7lbrBDDFcaIUzWbYmbTbt
s0sAoKMi5sEE+3R4SVMsKlmwmW3P005a
=DPzk
-----END PGP SIGNATURE-----
SELinux is preventing /usr/lib/cups/backend/hp from read access on
the chr_file 044. For complete SELinux messages. run sealert -l
b826ab3e-5b7c-4b13-84b3-cfa77eb8e7b2
and this is the messages file and the crash happened between these lines
Sep 22 20:42:10 localhost python: io/hpmud/pp.c 627: unable to read
device-id ret=-1
Sep 22 20:42:10 localhost udev-configure-printer: no corresponding CUPS device found
Sep 22 20:42:12 localhost setroubleshoot: SELinux is preventing /usr/lib/cups/backend/hp
from read access on the chr_file 044. For complete SELinux messages. run sealert -l
b826ab3e-5b7c-4b13-84b3-cfa77eb8e7b2
Sep 22 20:42:14 localhost setroubleshoot: SELinux is preventing /usr/lib/cups/backend/hp
from read access on the chr_file 044. For complete SELinux messages. run sealert -l
b826ab3e-5b7c-4b13-84b3-cfa77eb8e7b2
Sep 22 20:49:30 localhost kernel: [ 5538.231226] [drm] nouveau 0000:01:00.0: Setting dpms
mode 0 on vga encoder (output 0)
Sep 22 21:04:25 localhost kernel: [ 6433.067959] [drm] nouveau 0000:01:00.0: Setting dpms
mode 3 on vga encoder (output 0)
Sep 22 21:09:15 localhost dbus: [system] Activating service
name='org.freedesktop.PackageKit' (using servicehelper)
Sep 22 21:09:15 localhost dbus: [system] Successfully activated service
'org.freedesktop.PackageKit'
Sep 22 21:12:06 localhost kernel: [ 6894.301934] [drm] nouveau 0000:01:00.0: Setting dpms
mode 0 on vga encoder (output 0)
Sep 22 21:18:39 localhost kernel: imklog 5.8.2, log source = /proc/kmsg started.
Sep 22 21:18:39 localhost rsyslogd: [origin software="rsyslogd"
swVersion="5.8.2" x-pid="739"
x-info="http://www.rsyslog.com"] start
Sep 22 21:18:39 localhost kernel: [ 0.000000] Initializing cgroup subsys cpuset
Sep 22 21:18:39 localhost kernel: [ 0.000000] Initializing cgroup subsys cpu
Sep 22 21:18:39 localhost kernel: [ 0.000000] Linux version 2.6.40.4-5.fc15.i686.PAE
(mockbuild(a)x86-14.phx2.fedoraproject.org) (gcc version 4.6.0 20110603 (Red Hat 4.6.0-10)
(GCC) ) #1 SMP Tue Aug 30 14:43:52 UTC 2011
Sep 22 21:18:39 localhost kernel: [ 0.000000] BIOS-provided physical RAM map:
Sep 22 21:18:39 localhost kernel: [ 0.000000] BIOS-e820: 0000000000000000 -
000000000009fc00 (usable)
Sep 22 21:18:39 localhost kernel: [ 0.000000] BIOS-e820: 000000000009fc00 -
00000000000a0000 (reserved)
Sep 22 21:18:39 localhost kernel: [ 0.000000] BIOS-e820: 00000000000e0000 -
0000000000100000 (reserved)
butfrom sensors I get
sensors
atk0110-acpi-0
Adapter: ACPI interface
Vcore Voltage: +1.37 V (min = +1.45 V, max = +1.75 V)
+3.3 Voltage: +1.60 V (min = +3.00 V, max = +3.60 V)
+5.0 Voltage: +1.62 V (min = +4.50 V, max = +5.50 V)
+12.0 Voltage: +11.98 V (min = +11.20 V, max = +13.20 V)
CPU FAN Speed: 3068 RPM (min = 0 RPM)
CHASSIS FAN Speed: 2410 RPM (min = 0 RPM)
CPU Temperature: +50.0°C (high = +90.0°C, crit = +125.0°C)
MB Temperature: +46.0°C (high = +70.0°C, crit = +125.0°C)
Power Temperature: +123.0°C (high = +80.0°C, crit = +125.0°C)
w83627ehf-isa-0290
Adapter: ISA adapter
Vcore: +1.37 V (min = +0.00 V, max = +1.85 V)
in1: +1.82 V (min = +0.00 V, max = +0.03 V) ALARM
AVCC: +3.22 V (min = +0.00 V, max = +0.00 V) ALARM
+3.3V: +3.20 V (min = +0.00 V, max = +0.06 V) ALARM
in4: +2.04 V (min = +0.00 V, max = +0.00 V) ALARM
in5: +1.62 V (min = +0.00 V, max = +0.00 V) ALARM
in6: +1.97 V (min = +0.00 V, max = +0.00 V) ALARM
3VSB: +3.18 V (min = +0.00 V, max = +0.00 V) ALARM
Vbat: +0.00 V (min = +0.00 V, max = +0.00 V)
in9: +1.35 V (min = +0.00 V, max = +0.00 V) ALARM
fan1: 2410 RPM (min = 168750 RPM, div = 4) ALARM
fan2: 3068 RPM (min = 0 RPM, div = 2) ALARM
fan3: 0 RPM (min = 164 RPM, div = 128) ALARM
fan5: 0 RPM (min = 0 RPM, div = 4)
temp1: +46.0°C (high = +0.0°C, hyst = +0.0°C) ALARM sensor = thermistor
temp2: +50.0°C (high = +80.0°C, hyst = +75.0°C) sensor = diode
temp3: +123.5°C (high = +80.0°C, hyst = +75.0°C) ALARM sensor = thermistor
--
Antonio
--------------------------------------------
Prima di stampare pensa all'ambiente
Think about environment before printing
Skype: amontag52
Linux Fedora 15 Lovelock on Casa
Linux user number 362582
http://www.campingmonterosa.com
http://www.studiodacolpaloschi.it
-------------------------------------------
3:54 p.m.
Joe Zeff ha scritto / said the following il giorno/on 22/09/2011 22:52:
On 09/22/2011 01:28 PM, antonio montagnani wrote:
> I miss your comment: but whyreboot starts with imklog??
> Forgot to say that I am experiencing reboots ona rgularbasis, i.e. every
> two hours more or less
That sounds like a hardware issue. Have you checked your fans?
yes, fans seems to
work fine...
4:35 p.m.
On 09/22/2011 01:54 PM, antoniomontagnani(a)gmail.com wrote:
yes, fans seems to work fine...
Good. That's one possibility eliminated. Somebody else mentioned the
power supply for your box. Is it practical for you to swap a different
one in to see if it makes a difference? Also, you might want to
consider running memtest to make sure you don't have any dodgy RAM.
3:38 p.m.
Ed Greshko ha scritto / said the following il giorno/on 22/09/2011 22:35:
On 09/23/2011 03:42 AM, antonio montagnani wrote:
> mment?
FWIW, several years ago I had a system that would spontaneously
"reboot". More accurately, crash/restart. Nothing in the logs revealed
anything of value. After a week of this, it finally crashed and stayed
crashed. The culprit was the power supply.
you mean the main power supply, don't you??
--
Antonio
--------------------------------------------
Prima di stampare pensa all'ambiente
Think about environment before printing
Skype: amontag52
Linux Fedora 15 Lovelock on Casa
Linux user number 362582
http://www.campingmonterosa.com
http://www.studiodacolpaloschi.it
-------------------------------------------
3:35 p.m.
On 09/23/2011 03:42 AM, antonio montagnani wrote:
after two hours of operation my Fedora 15 shuts down and system
reboots
byitself suddenly: I was thinking that it was at the end of his life,
but I noticed after rebooting that I was already logged as user and I
got a message about Selinux stating that some cups/backend/hp could not
write somewhere (I deleted the message by mistake).Any comment?
FWIW, several years ago I had a system that would spontaneously
"reboot". More accurately, crash/restart. Nothing in the logs revealed
anything of value. After a week of this, it finally crashed and stayed
crashed. The culprit was the power supply.
--
Even if you do learn to speak correct English, whom are you going to
speak it to? -- Clarence Darrow
3:28 p.m.
Daniel J Walsh ha scritto / said the following il giorno/on
22/09/2011 22:13:
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On 09/22/2011 04:08 PM, antonio montagnani wrote:
> Daniel J Walsh ha scritto / said the following il giorno/on
> 22/09/2011 21:56: On 09/22/2011 03:42 PM, antonio montagnani
> wrote:
>>>> after two hours of operation my Fedora 15 shuts down and
>>>> system reboots byitself suddenly: I was thinking that it was
>>>> at the end of his life, but I noticed after rebooting that I
>>>> was already logged as user and I got a message about Selinux
>>>> stating that some cups/backend/hp could not write somewhere
>>>> (I deleted the message by mistake).Any comment?
> Sounds like a kernel issue or hardware, overheating. I doubt this
> is an SELinux issue. I would look in the /var/log/messages for
> indication of why the system is going down.
>
> This is tthe kernel message about Selinux:
>> SELinux is preventing /usr/lib/cups/backend/hp from read access
>> on the chr_file 044. For complete SELinux messages. run sealert
>> -l b826ab3e-5b7c-4b13-84b3-cfa77eb8e7b2
>
> and this is the messages file and the crash happened between these
> lines
>> Sep 22 20:42:10 localhost python: io/hpmud/pp.c 627: unable to
>> read device-id ret=-1 Sep 22 20:42:10 localhost
>> udev-configure-printer: no corresponding CUPS device found Sep 22
>> 20:42:12 localhost setroubleshoot: SELinux is preventing
>> /usr/lib/cups/backend/hp from read access on the chr_file 044.
>> For complete SELinux messages. run sealert -l
>> b826ab3e-5b7c-4b13-84b3-cfa77eb8e7b2 Sep 22 20:42:14 localhost
>> setroubleshoot: SELinux is preventing /usr/lib/cups/backend/hp
>> from read access on the chr_file 044. For complete SELinux
>> messages. run sealert -l b826ab3e-5b7c-4b13-84b3-cfa77eb8e7b2 Sep
>> 22 20:49:30 localhost kernel: [ 5538.231226] [drm] nouveau
>> 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) Sep
>> 22 21:04:25 localhost kernel: [ 6433.067959] [drm] nouveau
>> 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) Sep
>> 22 21:09:15 localhost dbus: [system] Activating service
>> name='org.freedesktop.PackageKit' (using servicehelper) Sep 22
>> 21:09:15 localhost dbus: [system] Successfully activated service
>> 'org.freedesktop.PackageKit' Sep 22 21:12:06 localhost kernel: [
>> 6894.301934] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on
>> vga encoder (output 0) Sep 22 21:18:39 localhost kernel: imklog
>> 5.8.2, log source = /proc/kmsg started. Sep 22 21:18:39 localhost
>> rsyslogd: [origin software="rsyslogd" swVersion="5.8.2"
>> x-pid="739" x-info="http://www.rsyslog.com"] start Sep 22
>> 21:18:39 localhost kernel: [ 0.000000] Initializing cgroup
>> subsys cpuset Sep 22 21:18:39 localhost kernel: [ 0.000000]
>> Initializing cgroup subsys cpu Sep 22 21:18:39 localhost kernel:
>> [ 0.000000] Linux version 2.6.40.4-5.fc15.i686.PAE
>> (mockbuild(a)x86-14.phx2.fedoraproject.org) (gcc version 4.6.0
>> 20110603 (Red Hat 4.6.0-10) (GCC) ) #1 SMP Tue Aug 30 14:43:52
>> UTC 2011 Sep 22 21:18:39 localhost kernel: [ 0.000000]
>> BIOS-provided physical RAM map: Sep 22 21:18:39 localhost kernel:
>> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00
>> (usable) Sep 22 21:18:39 localhost kernel: [ 0.000000]
>> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) Sep 22
>> 21:18:39 localhost kernel: [ 0.000000] BIOS-e820:
>> 00000000000e0000 - 0000000000100000 (reserved)
>
> butfrom sensors I get
>> sensors atk0110-acpi-0 Adapter: ACPI interface Vcore Voltage:
>> +1.37 V (min = +1.45 V, max = +1.75 V) +3.3 Voltage:
>> +1.60 V (min = +3.00 V, max = +3.60 V) +5.0 Voltage:
>> +1.62 V (min = +4.50 V, max = +5.50 V) +12.0 Voltage:
>> +11.98 V (min = +11.20 V, max = +13.20 V) CPU FAN Speed:
>> 3068 RPM (min = 0 RPM) CHASSIS FAN Speed: 2410 RPM (min =
>> 0 RPM) CPU Temperature: +50.0°C (high = +90.0°C, crit =
>> +125.0°C) MB Temperature: +46.0°C (high = +70.0°C, crit =
>> +125.0°C) Power Temperature: +123.0°C (high = +80.0°C, crit =
>> +125.0°C)
>>
>> w83627ehf-isa-0290 Adapter: ISA adapter Vcore: +1.37 V
>> (min = +0.00 V, max = +1.85 V) in1: +1.82 V (min =
>> +0.00 V, max = +0.03 V) ALARM AVCC: +3.22 V (min =
>> +0.00 V, max = +0.00 V) ALARM +3.3V: +3.20 V (min =
>> +0.00 V, max = +0.06 V) ALARM in4: +2.04 V (min =
>> +0.00 V, max = +0.00 V) ALARM in5: +1.62 V (min =
>> +0.00 V, max = +0.00 V) ALARM in6: +1.97 V (min =
>> +0.00 V, max = +0.00 V) ALARM 3VSB: +3.18 V (min =
>> +0.00 V, max = +0.00 V) ALARM Vbat: +0.00 V (min =
>> +0.00 V, max = +0.00 V) in9: +1.35 V (min = +0.00 V,
>> max = +0.00 V) ALARM fan1: 2410 RPM (min = 168750 RPM,
>> div = 4) ALARM fan2: 3068 RPM (min = 0 RPM, div = 2)
>> ALARM fan3: 0 RPM (min = 164 RPM, div = 128) ALARM
>> fan5: 0 RPM (min = 0 RPM, div = 4) temp1:
>> +46.0°C (high = +0.0°C, hyst = +0.0°C) ALARM sensor =
>> thermistor temp2: +50.0°C (high = +80.0°C, hyst =
>> +75.0°C) sensor = diode temp3: +123.5°C (high = +80.0°C,
>> hyst = +75.0°C) ALARM sensor = thermistor
>
>
>
I miss your comment: but whyreboot starts with
imklog??
Forgot to say that I am experiencing reboots ona rgularbasis, i.e. every
two hours more or less
--
Antonio
--------------------------------------------
Prima di stampare pensa all'ambiente
Think about environment before printing
Skype: amontag52
Linux Fedora 15 Lovelock on Casa
Linux user number 362582
http://www.campingmonterosa.com
http://www.studiodacolpaloschi.it
-------------------------------------------
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iEYEARECAAYFAk57ltEACgkQrlYvE4MpobOengCfXd1zQsSS3nFkt+WS1X6FTmeu
YHcAnjTbMiwJ0MJJ5L+PPBsVzL82LEXv
=UgVD
-----END PGP SIGNATURE-----
2:56 p.m.
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On 09/22/2011 03:42 PM, antonio montagnani wrote:
after two hours of operation my Fedora 15 shuts down and system
reboots byitself suddenly: I was thinking that it was at the end of
his life, but I noticed after rebooting that I was already logged
as user and I got a message about Selinux stating that some
cups/backend/hp could not write somewhere (I deleted the message by
mistake).Any comment?
Sounds like a kernel issue or hardware, overheating. I
doubt this is
an SELinux issue. I would look in the /var/log/messages for
indication of why the system is going down.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iEYEARECAAYFAk57kv8ACgkQrlYvE4MpobNWsQCggIw7lbrBDDFcaIUzWbYmbTbt
s0sAoKMi5sEE+3R4SVMsKlmwmW3P005a
=DPzk
-----END PGP SIGNATURE-----
6:27 a.m.
On Thu, 2011-09-22 at 22:54 +0200, antoniomontagnani(a)gmail.com wrote:
yes, fans seems to work fine...
I'll add the obvious: It's not enough that they spin, there has to be
airflow through the heatsink that the fans blow across, and throughout
the cabinet. Also, heatsinks need to make good physical contact with
what they're attached too.
--
[tim@localhost ~]$ uname -r
2.6.27.25-78.2.56.fc9.i686
Don't send private replies to my address, the mailbox is ignored. I
read messages from the public lists.
4623
days inactive
4626
days old
11 comments
6 participants
participants (6)
-
Antonio M -
antonio montagnani -
Daniel J Walsh -
Ed Greshko -
Joe Zeff -
Tim