10:19 p.m.
I need to install F15 without Gnome, KDE, XFCE, or LXDE. The target has
1 GB of flash for the filesystem. So how can I install F15 with X, but
without a DE?
Thanks,
John
12:48 a.m.
New subject: Dual Nics
I don't have any problem with two nic's, first one is for internal traffic
(LAN) and the other ones is dedicated for WAN traffic (Internet)
both nic's work at differents subnet
2011/7/25 M. Hamzah Khan <hamzah(a)hamzahkhan.com>
On Mon, 2011-07-25 at 12:17 -0400, Overkill wrote:
> Has anyone noticed that even if you use two network cards that only one
> nic is really doing all the traffic. I noticed this with many different
> types of network cards and nics. I even setup snmp monitoring, cacti,
> etc and noticed that both IP's and one interface is doing all the work.
> Even setup bonding and still does the same thing.
Both interfaces won't be used.
Packets will travel out of which ever interface has a route to their
destination.
If both interfaces have the same route, then it'll use the route with
the lower metric.
With bonding, it depends on the mode you are using.
If you are using 802.3ad, then from what I understand (someone correct
me if I'm wrong here!), you won't get the speed of both interfaces (ie,
2x gigabit ports bonded together won't mean you can transfer a single
file at 2 gigabits/s) but rather you can have two separate transfers
that together are going at 2 gigabits/s.
> Is this a driver issue or am I simply not using enterprise hardware?
>
> -Overkill
--
users mailing list
users(a)lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
2:36 p.m.
New subject: Dual Nics
On Mon, 2011-07-25 at 12:17 -0400, Overkill wrote:
Has anyone noticed that even if you use two network cards that only
one
nic is really doing all the traffic. I noticed this with many different
types of network cards and nics. I even setup snmp monitoring, cacti,
etc and noticed that both IP's and one interface is doing all the work.
Even setup bonding and still does the same thing.
Both interfaces won't be used.
Packets will travel out of which ever interface has a route to their
destination.
If both interfaces have the same route, then it'll use the route with
the lower metric.
With bonding, it depends on the mode you are using.
If you are using 802.3ad, then from what I understand (someone correct
me if I'm wrong here!), you won't get the speed of both interfaces (ie,
2x gigabit ports bonded together won't mean you can transfer a single
file at 2 gigabits/s) but rather you can have two separate transfers
that together are going at 2 gigabits/s.
Is this a driver issue or am I simply not using enterprise hardware?
-Overkill
11:34 a.m.
New subject: Dual Nics
Don't hijack threads. When you have a new topic, compose a new message
instead of replying to an existing one. Changing the Subject line is not
enough.
poc
11:17 a.m.
New subject: Dual Nics
Has anyone noticed that even if you use two network cards that only one
nic is really doing all the traffic. I noticed this with many different
types of network cards and nics. I even setup snmp monitoring, cacti,
etc and noticed that both IP's and one interface is doing all the work.
Even setup bonding and still does the same thing.
Is this a driver issue or am I simply not using enterprise hardware?
-Overkill
3:12 a.m.
On 07/25/2011 05:36 AM, Misha Shnurapet wrote:
Another question on this. If I default to runlevel 3, will removable
media like CDs, DVDs and USB drives still be mounted automatically upon insertion?
No, and more fun will come when you want to connect to a wireless network.
--
Roberto Ragusa mail at robertoragusa.it
2:47 a.m.
On 25 July 2011 09:14, Marko Vojinovic <vvmarko(a)gmail.com> wrote:
<--SNIP-->
>
> Another question on this. If I default to runlevel 3, will removable media
> like CDs, DVDs and USB drives still be mounted automatically upon
> insertion?
AFAIK, by default no, they won't. This is typically done by the graphical DE.
Namely, if there is no user currently logged in the desktop GUI, it is not
obvious which user should be set as owner of the files in the mount point.
However, I think this can be configured so that things get automounted with a
pre-specified owner etc. Google is your friend. ;-)
HTH, :-)
Marko
man fstab
As Marko already remarked - google is your friend. I would search for
udev rules.
--
Hiisi.
Registered Linux User #487982. Be counted at: http://counter.li.org/
--
Spandex is a privilege, not a right.
12:14 a.m.
On Monday 25 July 2011 04:36:39 Misha Shnurapet wrote:
15.07.2011, 22:46, "Mark W. Jeanmougin"
<markjx(a)gmail.com>:
> On Thu, Jul 14, 2011 at 23:19, John Wendel <jwendel10(a)comcast.net>; wrote:
>> I need to install F15 without Gnome, KDE, XFCE, or LXDE. The target
>> has 1 GB of flash for the filesystem. So how can I install F15 with X,
>> but without a DE?
>
> I always do my installs off the DVD. There's also a "minimal" install
> that I use on my servers. It works well.
>
> Then, you'd just "yum install" whatever to get X.
Another question on this. If I default to runlevel 3, will removable media
like CDs, DVDs and USB drives still be mounted automatically upon
insertion?
AFAIK, by default no, they won't. This is typically done by the graphical DE.
Namely, if there is no user currently logged in the desktop GUI, it is not
obvious which user should be set as owner of the files in the mount point.
However, I think this can be configured so that things get automounted with a
pre-specified owner etc. Google is your friend. ;-)
HTH, :-)
Marko
10:36 p.m.
15.07.2011, 22:46, "Mark W. Jeanmougin" <markjx(a)gmail.com>:
On Thu, Jul 14, 2011 at 23:19, John Wendel
<jwendel10(a)comcast.net>; wrote:
> I need to install F15 without Gnome, KDE, XFCE, or LXDE. The target has
> 1 GB of flash for the filesystem. So how can I install F15 with X, but
> without a DE?
I always do my installs off the DVD. There's also a "minimal" install
that I use on my servers. It works well.
Then, you'd just "yum install" whatever to get X.
MJ
Another question on this. If I default to runlevel 3, will removable media like CDs, DVDs
and USB drives still be mounted automatically upon insertion?
--
Best regards,
Misha Shnurapet, Fedora Project Contributor
Email: shnurapet AT fedoraproject.org, IRC: misha on freenode
https://fedoraproject.org/wiki/shnurapet, GPG: 00217306
8:46 a.m.
On Thu, Jul 14, 2011 at 23:19, John Wendel <jwendel10(a)comcast.net> wrote:
I need to install F15 without Gnome, KDE, XFCE, or LXDE. The target
has
1 GB of flash for the filesystem. So how can I install F15 with X, but
without a DE?
I always do my installs off the DVD. There's also a "minimal" install
that I use on my servers. It works well.
Then, you'd just "yum install" whatever to get X.
MJ
12:58 a.m.
On Fri, Jul 15, 2011 at 6:40 AM, John Wendel <jwendel10(a)comcast.net> wrote:
Nothing special require, just a very small install.
I would suggest 2 things:
1. febootstrap - # yum install febootstrap
2. use kickstart files to install, you can start here:
<https://fedorahosted.org/spin-kickstarts/browser>
Regards,
John
GL
--
Suvayu
Open source is the future. It sets us free.
11:40 p.m.
On 07/14/2011 08:25 PM, Doug Kuvaas wrote:
Absolutely!
You will probably need to get either the installation DVD or the
Network install CD, I don't recall seeing package options when
installing from live media.
http://fedoraproject.org/en/get-fedora-all
I would opt for the minimum install and then select "Customize now".
From there you can select X and any other packages you may require.
Note that when you install Fedora with no DE, it defaults to runlevel
3 at bootup.
Do you need to do anything special with X?
Thanks very much for the reply. I've haven't install from a DVD in a
long time, I've just used the live cds that don't let you choose
packages. Nothing special require, just a very small install.
Regards,
John
On Thu, Jul 14, 2011 at 10:19 PM, John Wendel
<jwendel10(a)comcast.net
<mailto:jwendel10@comcast.net>> wrote:
I need to install F15 without Gnome, KDE, XFCE, or LXDE. The
target has
1 GB of flash for the filesystem. So how can I install F15 with X, but
without a DE?
Thanks,
John
--
users mailing list
users(a)lists.fedoraproject.org <mailto:users@lists.fedoraproject.org>
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
10:25 p.m.
Absolutely!
You will probably need to get either the installation DVD or the Network
install CD, I don't recall seeing package options when installing from live
media.
http://fedoraproject.org/en/get-fedora-all
I would opt for the minimum install and then select "Customize now". From
there you can select X and any other packages you may require.
Note that when you install Fedora with no DE, it defaults to runlevel 3 at
bootup.
Do you need to do anything special with X?
On Thu, Jul 14, 2011 at 10:19 PM, John Wendel <jwendel10(a)comcast.net> wrote:
I need to install F15 without Gnome, KDE, XFCE, or LXDE. The target
has
1 GB of flash for the filesystem. So how can I install F15 with X, but
without a DE?
Thanks,
John
--
users mailing list
users(a)lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
4667
days inactive
4678
days old
13 comments
12 participants
participants (12)
-
Doug Kuvaas -
Hiisi -
John Wendel -
M. Hamzah Khan -
Mark W. Jeanmougin -
Marko Vojinovic -
Misha Shnurapet -
Overkill -
Patrick O'Callaghan -
Roberto Ragusa -
Santiago Enrique Lemus Martínez -
Suvayu Ali