4:38 a.m.
Hi, list!
I'm trying to set up passwordless sudo for myself. It's a shiny brand
new fresh-installed F16. During first boot I had been asked to create
a new user and put him to administrative group. I answered yes and
hence my user is able to run commands using sudo. However in
/etc/sudoers there's not a mention of my user. I've added the
following string to it:
hiisi ALL=(ALL) NOPASSWD: ALL
Apparently it has no effect - I have to enter password each time sudo
is invoked for the first time.
What the heck and how do I solve this mystery?
--
Hiisi.
Registered Linux User #487982. Be counted at: http://counter.li.org/
--
Spandex is a privilege, not a right.
5:15 a.m.
On Wed, 2011-11-30 at 13:38 +0300, Hiisi wrote:
Hi, list!
I'm trying to set up passwordless sudo for myself. It's a shiny brand
new fresh-installed F16. During first boot I had been asked to create
a new user and put him to administrative group. I answered yes and
hence my user is able to run commands using sudo. However in
/etc/sudoers there's not a mention of my user. I've added the
following string to it:
hiisi ALL=(ALL) NOPASSWD: ALL
Apparently it has no effect - I have to enter password each time sudo
is invoked for the first time.
What the heck and how do I solve this mystery?
--
Hiisi.
Registered Linux User #487982. Be counted at: http://counter.li.org/
--
Spandex is a privilege, not a right.
When you add yourself or another and add them
to the administrators
group they become a member of group wheel. Run visudo find the no
password line for the wheel group and uncomment it and comment the other
one.
5:04 a.m.
On 30 November 2011 15:01, Digvijay Patankar <dbpatankar(a)gmail.com> wrote:
Yes it does. It has something to do with proper format which is
ensured by
visudo but not vi.
On Wed, Nov 30, 2011 at 4:29 PM, Hiisi <hiisi(a)fedoraproject.org> wrote:
>
> On 30 November 2011 14:45, Digvijay Patankar <dbpatankar(a)gmail.com> wrote:
> >
> > Make sure you are using visudo to edit sudoers file.
> >
>
> Does it matter?
I used to do it both ways. This time I did it by 'visudo'.
--
Hiisi.
Registered Linux User #487982. Be counted at: http://counter.li.org/
--
Spandex is a privilege, not a right.
5:01 a.m.
Yes it does. It has something to do with proper format which is ensured by
visudo but not vi.
On Wed, Nov 30, 2011 at 4:29 PM, Hiisi <hiisi(a)fedoraproject.org> wrote:
On 30 November 2011 14:45, Digvijay Patankar
<dbpatankar(a)gmail.com> wrote:
>
> Make sure you are using visudo to edit sudoers file.
>
Does it matter?
--
Hiisi.
Registered Linux User #487982. Be counted at: http://counter.li.org/
--
Spandex is a privilege, not a right.
--
users mailing list
users(a)lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
--
*Digvijay Patankar*
Senior Research Fellow,*
*
Dept. of Civil Engineering,
Indian Institute of Science,
Bangalore - 560012*
*
Please avoid sending me Word or PowerPoint attachments.
See http://www.gnu.org/philosophy/no-word-attachments.html
5:46 a.m.
Am 30.11.2011 12:37, schrieb Emilio Lopez:
> I'm trying to set up passwordless sudo for myself
Im not familiar with sudo, but doing it, sudo without password, is not
a bad practice that allow any program
to run anything as root without your knowledge, (calling sudo internally)???
yes it is normally a bad idea
but depends on what the user and script running under this
user are supposed to do - for role-accounts where you have
automatic batch-jobs which should start task as normal
user and needs sudo it is a good thing
[builduser@buildserver:~]$ cat /rpmbuild/SPECS/build-all.sh
#!/bin/bash
DATE_COMPILE_START=$(date "+%d.%m.%Y %H:%M:%S")
source /home/builduser/config.sh
cd /rpmbuild/SPECS/
QA_RPATHS=$[ 0x0001|0x0010 ] rpmbuild -bb GeoIP.spec
sudo yum --nogpgcheck -y localupdate /home/builduser/rpmbuild/RPMS/$RH_ARCH/*.rpm
rpmbuild -bb /home/builduser/rpmbuild/SPECS/httpd.spec
sudo yum --nogpgcheck -y localupdate /home/builduser/rpmbuild/RPMS/$RH_ARCH/*.rpm
QA_RPATHS=$[ 0x0001|0x0010 ] rpmbuild -bb
/home/builduser/rpmbuild/SPECS/mod_security.spec
rpmbuild -bb /home/builduser/rpmbuild/SPECS/mod_flvx.spec
rpmbuild -bb /home/builduser/rpmbuild/SPECS/mod_bw.spec
rpmbuild -bb /home/builduser/rpmbuild/SPECS/mod_bwshare.spec
rpmbuild -bb /home/builduser/rpmbuild/SPECS/mod_h264_streaming.spec
sudo yum --nogpgcheck -y localupdate /home/builduser/rpmbuild/RPMS/$RH_ARCH/*.rpm
rpmbuild -bb /home/builduser/rpmbuild/SPECS/mysql.spec
sudo yum --nogpgcheck -y localupdate /home/builduser/rpmbuild/RPMS/$RH_ARCH/*.rpm
./build-all-php.sh
rpmbuild -bb /home/builduser/rpmbuild/SPECS/libmp4v2.spec
sudo yum --nogpgcheck -y localupdate /home/builduser/rpmbuild/RPMS/$RH_ARCH/*.rpm
rpmbuild -bb /home/builduser/rpmbuild/SPECS/x264.spec
sudo yum --nogpgcheck -y localupdate /home/builduser/rpmbuild/RPMS/$RH_ARCH/*.rpm
rpmbuild -bb /home/builduser/rpmbuild/SPECS/libquicktime.spec
rpmbuild -bb /home/builduser/rpmbuild/SPECS/lame.spec
rpmbuild -bb /home/builduser/rpmbuild/SPECS/faac.spec
rpmbuild -bb /home/builduser/rpmbuild/SPECS/faad2.spec
rpmbuild -bb /home/builduser/rpmbuild/SPECS/a52dec.spec
rpmbuild -bb /home/builduser/rpmbuild/SPECS/libvpx.spec
rpmbuild -bb /home/builduser/rpmbuild/SPECS/libmpdclient.spec
sudo yum --nogpgcheck -y localupdate /home/builduser/rpmbuild/RPMS/$RH_ARCH/*.rpm
rpmbuild -bb /home/builduser/rpmbuild/SPECS/pulsed.spec
rpmbuild -bb /home/builduser/rpmbuild/SPECS/mpd.spec
rpmbuild -bb /home/builduser/rpmbuild/SPECS/mpdscribble.spec
rpmbuild -bb /home/builduser/rpmbuild/SPECS/ffmpeg.spec
sudo yum --nogpgcheck -y localupdate /home/builduser/rpmbuild/RPMS/$RH_ARCH/*.rpm
rpmbuild -bb /home/builduser/rpmbuild/SPECS/transcode.spec
sudo yum --nogpgcheck -y localupdate /home/builduser/rpmbuild/RPMS/$RH_ARCH/*.rpm
rpmbuild -bb /home/builduser/rpmbuild/SPECS/postfix.spec
rpmbuild -bb /home/builduser/rpmbuild/SPECS/postgrey.spec
rpmbuild -bb /home/builduser/rpmbuild/SPECS/dovecot.spec
rpmbuild -bb /home/builduser/rpmbuild/SPECS/dbmail.spec
rpmbuild -bb /home/builduser/rpmbuild/SPECS/dbmail-postfix-policyd.spec
rpmbuild -bb /home/builduser/rpmbuild/SPECS/webalizer-xtended.spec
rpmbuild -bb /home/builduser/rpmbuild/SPECS/mp3info.spec
rpmbuild -bb /home/builduser/rpmbuild/SPECS/iat.spec
rpmbuild -bb /home/builduser/rpmbuild/SPECS/aespipe.spec
rpmbuild -bb /home/builduser/rpmbuild/SPECS/mysqltuner.spec
rpmbuild -bb /home/builduser/rpmbuild/SPECS/php-reader.spec
rpmbuild -bb /home/builduser/rpmbuild/SPECS/php-manual-de.spec
rpmbuild -bb /home/builduser/rpmbuild/SPECS/phpMyAdmin.spec
rpmbuild -bb /home/builduser/rpmbuild/SPECS/perl-class-std-fast.spec
rpmbuild -bb /home/builduser/rpmbuild/SPECS/perl-soap-wsdl.spec
sudo yum --nogpgcheck -y localupdate /home/builduser/rpmbuild/RPMS/noarch/*.rpm
rpmbuild -bb /home/builduser/rpmbuild/SPECS/perl-net-dri.spec
rpmbuild -bb /home/builduser/rpmbuild/SPECS/perl-IO-Socket-INET6.spec
rpmbuild -bb /home/builduser/rpmbuild/SPECS/netatalk.spec
rpmbuild -bb /home/builduser/rpmbuild/SPECS/hylafax.spec
rpmbuild -bb /home/builduser/rpmbuild/SPECS/iaxmodem.spec
sudo yum --nogpgcheck -y localupdate /home/builduser/rpmbuild/RPMS/$RH_ARCH/*.rpm
sudo yum --nogpgcheck -y localupdate /home/builduser/rpmbuild/RPMS/noarch/*.rpm
./build-horde.sh
sudo yum --nogpgcheck -y localupdate /home/builduser/rpmbuild/RPMS/noarch/*.rpm
DATE_COMPILE_FINISH=$(date "+%d.%m.%Y %H:%M:%S")
echo ""
echo "-----------------------------------------------"
echo $DATE_COMPILE_START
echo $DATE_COMPILE_FINISH
echo "-----------------------------------------------"
10:49 a.m.
On Wed, 2011-11-30 at 13:38 +0300, Hiisi wrote:
Hi, list!
I'm trying to set up passwordless sudo for myself. It's a shiny brand
new fresh-installed F16. During first boot I had been asked to create
a new user and put him to administrative group. I answered yes and
hence my user is able to run commands using sudo. However in
/etc/sudoers there's not a mention of my user. I've added the
following string to it:
hiisi ALL=(ALL) NOPASSWD: ALL
On initial installs when this is setup, your userID is not added to the
sudoers file itself. The *wheel* group is what is allowed/setup in
sudoers, and your userid is added to the *wheel* group in the /etc/group
file, such as below..
wheel:x:10:your-username-here
If you wanted to do passwordless, then comment out the line below..
## Allows people in group wheel to run all commands
%wheel ALL=(ALL) ALL
And uncomment the line below here..
## Same thing without a password
# %wheel ALL=(ALL) NOPASSWD: ALL
In other words, it doesn't add the username/ID itself to the sudoers
file, it goes through the *wheel* group and you add/drop users from
there on need to use basis.
--
Mike Chambers
Madisonville, KY
"The best town on Earth!"
12:50 p.m.
On Wed, 2011-11-30 at 17:36 +0000, Marko Vojinovic wrote:
On Wednesday 30 November 2011 10:49:40 Mike Chambers wrote:
> On Wed, 2011-11-30 at 13:38 +0300, Hiisi wrote:
> > Hi, list!
> > I'm trying to set up passwordless sudo for myself. It's a shiny brand
> > new fresh-installed F16. During first boot I had been asked to create
> > a new user and put him to administrative group. I answered yes and
> > hence my user is able to run commands using sudo. However in
> > /etc/sudoers there's not a mention of my user. I've added the
> > following string to it:
> > hiisi ALL=(ALL) NOPASSWD: ALL
>
> On initial installs when this is setup, your userID is not added to the
> sudoers file itself. The *wheel* group is what is allowed/setup in
> sudoers, and your userid is added to the *wheel* group in the /etc/group
> file, such as below..
>
> wheel:x:10:your-username-here
>
> If you wanted to do passwordless, then comment out the line below..
>
> ## Allows people in group wheel to run all commands
> %wheel ALL=(ALL) ALL
>
> And uncomment the line below here..
>
> ## Same thing without a password
> # %wheel ALL=(ALL) NOPASSWD: ALL
>
> In other words, it doesn't add the username/ID itself to the sudoers
> file, it goes through the *wheel* group and you add/drop users from
> there on need to use basis.
Wouldn't this actually enable passwordless sudo for all members of the wheel
group, rather than just for one user?
Yes it would. Or change the group to something else instead of wheel
and just make sure the groups file is updated.
What would the config look like if the OP wants to be both a member of the
wheel group, and have a paswordless sudo config *only* for himself?
If just using the stuff already in the config, for example the OP could
uncomment the first one with wheel and use that one with passwords, and
then uncomment the line below and put in his own group for ones without
passwords.
Not sure which one is read/used first but assuming it would know. man
sudoers for more information.
--
Mike Chambers
Madisonville, KY
"The best town on Earth!"
6:04 p.m.
On Wed, 2011-11-30 at 15:32 -0500, Mike Williams wrote:
Not sure if there are other reasons to add a user to the wheel group.
Don't think there is any other use for the wheel group.
Maybe not for the OP, but there is also a pam_wheel module that will
succeed only if the invoking user is in the wheel group. It is sometimes
used in /etc/pam.d/su to allow only wheel group users to use su.
--Greg
4:16 p.m.
On Wed, 2011-11-30 at 10:49 -0600, Mike Chambers wrote:
On Wed, 2011-11-30 at 13:38 +0300, Hiisi wrote:
> Hi, list!
> I'm trying to set up passwordless sudo for myself. It's a shiny brand
> new fresh-installed F16. During first boot I had been asked to create
> a new user and put him to administrative group. I answered yes and
> hence my user is able to run commands using sudo. However in
> /etc/sudoers there's not a mention of my user. I've added the
> following string to it:
> hiisi ALL=(ALL) NOPASSWD: ALL
On initial installs when this is setup, your userID is not added to the
sudoers file itself. The *wheel* group is what is allowed/setup in
sudoers, and your userid is added to the *wheel* group in the /etc/group
file, such as below..
wheel:x:10:your-username-here
If you wanted to do passwordless, then comment out the line below..
## Allows people in group wheel to run all commands
%wheel ALL=(ALL) ALL
And uncomment the line below here..
## Same thing without a password
# %wheel ALL=(ALL) NOPASSWD: ALL
In other words, it doesn't add the username/ID itself to the sudoers
file, it goes through the *wheel* group and you add/drop users from
there on need to use basis.
Thhat is not copletely true. Using visudo and adding
the line:
hilsi ALL=(root) NOPASSWD ALL
should work.
--
=======================================================================
I'd rather have a free bottle in front of me than a prefrontal lobotomy.
-- Fred Allen [Also attributed to S. Clay Wilson. Ed.]
=======================================================================
Aaron Konstam telephone: (210) 656-0355 e-mail: akonstam(a)sbcglobal.net
11:36 a.m.
On Wednesday 30 November 2011 10:49:40 Mike Chambers wrote:
On Wed, 2011-11-30 at 13:38 +0300, Hiisi wrote:
> Hi, list!
> I'm trying to set up passwordless sudo for myself. It's a shiny brand
> new fresh-installed F16. During first boot I had been asked to create
> a new user and put him to administrative group. I answered yes and
> hence my user is able to run commands using sudo. However in
> /etc/sudoers there's not a mention of my user. I've added the
> following string to it:
> hiisi ALL=(ALL) NOPASSWD: ALL
On initial installs when this is setup, your userID is not added to the
sudoers file itself. The *wheel* group is what is allowed/setup in
sudoers, and your userid is added to the *wheel* group in the /etc/group
file, such as below..
wheel:x:10:your-username-here
If you wanted to do passwordless, then comment out the line below..
## Allows people in group wheel to run all commands
%wheel ALL=(ALL) ALL
And uncomment the line below here..
## Same thing without a password
# %wheel ALL=(ALL) NOPASSWD: ALL
In other words, it doesn't add the username/ID itself to the sudoers
file, it goes through the *wheel* group and you add/drop users from
there on need to use basis.
Wouldn't this actually enable passwordless sudo for all members of the wheel
group, rather than just for one user?
What would the config look like if the OP wants to be both a member of the
wheel group, and have a paswordless sudo config *only* for himself?
Best, :-)
Marko
7:53 a.m.
On 30 November 2011 17:09, Aaron Konstam <akonstam(a)sbcglobal.net> wrote:
On Wed, 2011-11-30 at 14:04 +0300, Hiisi wrote:
> On 30 November 2011 15:01, Digvijay Patankar <dbpatankar(a)gmail.com> wrote:
> > Yes it does. It has something to do with proper format which is ensured by
> > visudo but not vi.
> >
> > On Wed, Nov 30, 2011 at 4:29 PM, Hiisi <hiisi(a)fedoraproject.org> wrote:
> >>
> >> On 30 November 2011 14:45, Digvijay Patankar <dbpatankar(a)gmail.com>
wrote:
> >> >
> >> > Make sure you are using visudo to edit sudoers file.
> >> >
> >>
> >> Does it matter?
>
> I used to do it both ways. This time I did it by 'visudo'.
I tried this yesterday and vo does not work
Just yesterday I edited it using vi on debian squeeze and everything
works like a charm. Nevertheless, using help from this list I managed
to get it to work now.
--
Hiisi.
Registered Linux User #487982. Be counted at: http://counter.li.org/
--
Spandex is a privilege, not a right.
7:09 a.m.
On Wed, 2011-11-30 at 14:04 +0300, Hiisi wrote:
On 30 November 2011 15:01, Digvijay Patankar
<dbpatankar(a)gmail.com> wrote:
> Yes it does. It has something to do with proper format which is ensured by
> visudo but not vi.
>
> On Wed, Nov 30, 2011 at 4:29 PM, Hiisi <hiisi(a)fedoraproject.org> wrote:
>>
>> On 30 November 2011 14:45, Digvijay Patankar <dbpatankar(a)gmail.com>
wrote:
>> >
>> > Make sure you are using visudo to edit sudoers file.
>> >
>>
>> Does it matter?
I used to do it both ways. This time I did it by 'visudo'.
I tried this
yesterday and vo does not work
--
=======================================================================
air, n.: A nutritious substance supplied by a bountiful Providence for
the fattening of the poor. -- Ambrose Bierce, "The Devil's Dictionary"
=======================================================================
Aaron Konstam telephone: (210) 656-0355 e-mail: akonstam(a)sbcglobal.net
7:07 a.m.
On Wed, 2011-11-30 at 10:44 +0000, Rich Boyce wrote:
On 30/11/11 10:38, Hiisi wrote:
> Hi, list!
> I'm trying to set up passwordless sudo for myself. It's a shiny brand
> new fresh-installed F16. During first boot I had been asked to create
> a new user and put him to administrative group. I answered yes and
> hence my user is able to run commands using sudo. However in
> /etc/sudoers there's not a mention of my user. I've added the
> following string to it:
> hiisi ALL=(ALL) NOPASSWD: ALL
> Apparently it has no effect - I have to enter password each time sudo
> is invoked for the first time.
Try taking out the space after NOPASSWD:
No the blank should be there.
--
=======================================================================
In a museum in Havana, there are two skulls of Christopher Columbus,
"one when he was a boy and one when he was a man." -- Mark Twain
=======================================================================
Aaron Konstam telephone: (210) 656-0355 e-mail: akonstam(a)sbcglobal.net
7:05 a.m.
On Wed, 2011-11-30 at 13:38 +0300, Hiisi wrote:
Hi, list!
I'm trying to set up passwordless sudo for myself. It's a shiny brand
new fresh-installed F16. During first boot I had been asked to create
a new user and put him to administrative group. I answered yes and
hence my user is able to run commands using sudo. However in
/etc/sudoers there's not a mention of my user. I've added the
following string to it:
hiisi ALL=(ALL) NOPASSWD: ALL
Apparently it has no effect - I have to enter password each time sudo
is invoked for the first time.
What the heck and how do I solve this mystery?
--
Hiisi.
I hope you are using visudo to edit the /etc/sudoers file. I made the
mistake yesterday using vi to do the edit and that will not work.
--
=======================================================================
If bankers can count, how come they have eight windows and only four
tellers?
=======================================================================
Aaron Konstam telephone: (210) 656-0355 e-mail: akonstam(a)sbcglobal.net
5:20 a.m.
On 30 November 2011 15:15, Terry Polzin <foxec208(a)wowway.com> wrote:
When you add yourself or another and add them to the administrators
group they become a member of group wheel. Run visudo find the no
password line for the wheel group and uncomment it and comment the other
one.
Thank you, Terry. You did it!
List, sorry for the noise and thanks to everybody involved in discussion.
--
Hiisi.
Registered Linux User #487982. Be counted at: http://counter.li.org/
--
Spandex is a privilege, not a right.
5 a.m.
Am 30.11.2011 11:59, schrieb Hiisi:
On 30 November 2011 14:45, Digvijay Patankar
<dbpatankar(a)gmail.com> wrote:
>
> Make sure you are using visudo to edit sudoers file.
>
Does it matter?
well top of the file there are comments:
## This file must be edited with the 'visudo' command.
4:59 a.m.
On 30 November 2011 14:45, Digvijay Patankar <dbpatankar(a)gmail.com> wrote:
Make sure you are using visudo to edit sudoers file.
Does it matter?
--
Hiisi.
Registered Linux User #487982. Be counted at: http://counter.li.org/
--
Spandex is a privilege, not a right.
4:45 a.m.
On Wed, Nov 30, 2011 at 4:08 PM, Hiisi <hiisi(a)fedoraproject.org> wrote:
Hi, list!
I'm trying to set up passwordless sudo for myself. It's a shiny brand
new fresh-installed F16. During first boot I had been asked to create
a new user and put him to administrative group. I answered yes and
hence my user is able to run commands using sudo. However in
/etc/sudoers there's not a mention of my user. I've added the
following string to it:
hiisi ALL=(ALL) NOPASSWD: ALL
Apparently it has no effect - I have to enter password each time sudo
is invoked for the first time.
What the heck and how do I solve this mystery?
--
Hiisi.
Registered Linux User #487982. Be counted at: http://counter.li.org/
--
Spandex is a privilege, not a right.
--
users mailing list
users(a)lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
Make sure you are using visudo to edit sudoers file.
--
*Digvijay Patankar*
Senior Research Fellow,*
*
Dept. of Civil Engineering,
Indian Institute of Science,
Bangalore - 560012*
*
Please avoid sending me Word or PowerPoint attachments.
See http://www.gnu.org/philosophy/no-word-attachments.html
4:44 a.m.
On 30/11/11 10:38, Hiisi wrote:
Hi, list!
I'm trying to set up passwordless sudo for myself. It's a shiny brand
new fresh-installed F16. During first boot I had been asked to create
a new user and put him to administrative group. I answered yes and
hence my user is able to run commands using sudo. However in
/etc/sudoers there's not a mention of my user. I've added the
following string to it:
hiisi ALL=(ALL) NOPASSWD: ALL
Apparently it has no effect - I have to enter password each time sudo
is invoked for the first time.
Try taking out the space after NOPASSWD:
HTH,
Rich
4:43 a.m.
Am 30.11.2011 11:38, schrieb Hiisi:
However in /etc/sudoers there's not a mention of my user.
I've added the
following string to it: hiisi ALL=(ALL) NOPASSWD: ALL
Apparently it has no effect - I have to enter password each time sudo
is invoked for the first time. What the heck and how do I solve this mystery?
where have you defined it and are this really TABs?
the following works since years on my build-machines to call "rpmbuild"
batch-scripts as builduser followed by a "yum localupdate" before the
next package is built to make sure that it uses the libraries from before
hopefully this is not broken in F16
## Allow root to run any commands anywhere
root ALL=(ALL) ALL
builduser ALL=(ALL) NOPASSWD: ALL
2:32 p.m.
On Wed, Nov 30, 2011 at 12:36 PM, Marko Vojinovic <vvmarko(a)gmail.com> wrote:
Wouldn't this actually enable passwordless sudo for all members
of the wheel
group, rather than just for one user?
What would the config look like if the OP wants to be both a member of the
wheel group, and have a paswordless sudo config *only* for himself?
Just use the username of the user instead of %wheel
mike ALL=(ALL) NOPASSWD: ALL
Adding a user to the wheel group is a separate issue. This can be
done via the user manager gui, or by editing /etc/group. As far as
the sudoers file goes, all settings for wheel are commented out by
default
Not sure if there are other reasons to add a user to the wheel group.
Don't think there is any other use for the wheel group. Perhaps
someone else who knows can respond to that issue.
Mike
4530
days inactive
4531
days old
21 comments
11 participants
participants (11)
-
Aaron Konstam -
Digvijay Patankar -
Emilio Lopez -
Greg Woods -
Hiisi -
Marko Vojinovic -
Mike Chambers -
Mike Williams -
Reindl Harald -
Rich Boyce -
Terry Polzin