users August 2005

users@lists.fedoraproject.org

792 participants
1343 discussions

by A.J. Bonnema

Hi all, I've just installed the 64 kernel FC4 on my AMD Athlon 64 X2 with a Asus AX800XL (which is a Radeon X800 card). For a driver I used the propriety one from ATI so I could play freedroidRPG (it needs 3D acceleration). What happens is, the /var/log/Xorg.0.log shows the following messages: (II) Loading sub module "fglrxdrm" (II) LoadModule: "fglrxdrm" (II) Loading /usr/X11R6/lib64/modules/linux/libfglrxdrm.a (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc." compiled for 6.8.0, module version = 8.16.20 ABI class: X.Org Server Extension, version 0.2 (II) fglrx(0): Depth moves disabled by default (**) fglrx(0): Capabilities: 0x02008000 (**) fglrx(0): CapabilitiesEx: 0x00000400 (**) fglrx(0): cpuFlags: 0x4000001f (**) fglrx(0): cpuSpeedMHz: 0x000003ed (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so" (**) fglrx(0): UseFastTLS=0 (**) fglrx(0): BlockSignalsOnLock=0 (==) fglrx(0): EnablePrivateBackZ = NO (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: <snip> (II) fglrx(0): UMM Bus area: 0xc0701000 (size=0x078ef000) (II) fglrx(0): UMM area: 0xc0701000 (size=0x078ef000) (II) fglrx(0): driver needs X.org 6.8.x.y with x.y >= 0.0 (II) fglrx(0): detected X.org 6.8.2.0 (II) Loading extension ATIFGLRXDRI (II) fglrx(0): doing DRIScreenInit drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (Unknown error 999) drmOpenDevice: open result is -1, (Unknown error 999) drmOpenDevice: Open failed drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (Unknown error 999) drmOpenDevice: open result is -1, (Unknown error 999) drmOpenDevice: Open failed [drm] failed to load kernel module "fglrx" (II) fglrx(0): [drm] drmOpen failed (EE) fglrx(0): DRIScreenInit failed! (WW) fglrx(0): *********************************************** (WW) fglrx(0): * DRI initialization failed! * (WW) fglrx(0): * (maybe driver kernel module missing or bad) * (WW) fglrx(0): * 2D acceleraton available (MMIO) * (WW) fglrx(0): * no 3D acceleration available * (WW) fglrx(0): ********************************************* * So, bottom line is, I have no 3D accelleration because the /dev/dri/card0 is missing? Or, is 3D hardware acceleration just not available for Radeon X800 cards? If I start freedroidRPG anyway, it ends my X-session immediately (really: a fraction of a second) and I am presented a logon screen...... Does anyone know what is wrong here? Guus. -- A.J. Bonnema, Leiden The Netherlands, user #328198 (Linux Counter http://counter.li.org)

18 years, 9 months

5
7
0 / 0

Re: Setting Up Linksys Wireless Internet with Fadora

by mindwave＠cfl.rr.com

dont know anything about a key. but i used this: https://www.linuxant.com/driverloader/wlan/downloads-installer.php in my laptop and it works like a charm. its $20 but WELL worthwhile. the ndiswrapper would load but i could never get it connected to my network by manually configuring. my time is worth a little more than $20. j Hello All, I am trying to set up a wireless network in my house and one of the computers is running Fadora. I know absolutly nothing about the operating system and any help would be greatly appreciated. I need to know where exactly I enter the key so that the adapter can connect to the network. Thanks in Advance -John -- fedora-list mailing list fedora-list(a)redhat.com To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list

18 years, 9 months

3
2
0 / 0

FC4 - Scanning with the hp psc 750

by Roger Grosswiler

hey, after googling a lot and find some information about the hp psc750 scanning i remarked - mine doesn't He prints, ok, but he doesn't scan. Unfortunately, nowhere has been described, how they got their psc750 working. Do you have a hint for me? Thanks, Roger

18 years, 9 months

3
18
0 / 0

FC4 - IBM e326 - network problems.

by Naoki

Hi all. I have a networking problem here I'd like to share. Cut down FC4 build on an IBM e326. I am attempting to SCP 2.4MB of data to this box ( from anywhere the results are the same ). It connects, asks for password, which I give. And then after a few packets I see it all go very ugly indeed. Throwing retransmissions and, segment losts, and DUP ACK messages. Which just kills the scp with a "Stalled" message. If I leave it then _eventaully_ the file will transfer. I've changed switches and have the same result. Starting to wonder if there is a problem with the Broadcom ethernet controller? One of the reasons I suspect the controller is performance jumps to normal (good) after I reinitialise the card. Server end : 4.913749 10.0.2.27 -> 10.0.2.31 SSHv2 Encrypted request packet len=144 4.916377 10.0.2.31 -> 10.0.2.27 SSHv2 Encrypted response packet len=32 4.916533 10.0.2.27 -> 10.0.2.31 TCP 60952 > ssh [ACK] Seq=1293 Ack=1597 Win=8400 Len=0 TSV=2056922151 TSER=5310028 4.916828 10.0.2.27 -> 10.0.2.31 SSHv2 Encrypted request packet len=64 4.916965 10.0.2.31 -> 10.0.2.27 SSHv2 Encrypted response packet len=48 4.917276 10.0.2.27 -> 10.0.2.31 SSHv2 Encrypted request packet len=64 4.918916 10.0.2.31 -> 10.0.2.27 SSHv2 Encrypted response packet len=48 4.958139 10.0.2.27 -> 10.0.2.31 TCP 60952 > ssh [ACK] Seq=1421 Ack=1693 Win=8400 Len=0 TSV=2056922193 TSER=5310031 4.958153 10.0.2.31 -> 10.0.2.27 SSHv2 Encrypted response packet len=48 4.958306 10.0.2.27 -> 10.0.2.31 TCP 60952 > ssh [ACK] Seq=1421 Ack=1741 Win=8400 Len=0 TSV=2056922193 TSER=5310070 4.958609 10.0.2.27 -> 10.0.2.31 SSHv2 Encrypted request packet len=64 4.958762 10.0.2.31 -> 10.0.2.27 SSHv2 Encrypted response packet len=48 4.962323 10.0.2.27 -> 10.0.2.31 SSHv2 Encrypted request packet len=1448 4.962446 10.0.2.27 -> 10.0.2.31 SSHv2 Encrypted request packet len=1448 4.962451 10.0.2.31 -> 10.0.2.27 TCP ssh > 60952 [ACK] Seq=1789 Ack=4381 Win=15424 Len=0 TSV=5310074 TSER=2056922196 4.962986 10.0.2.27 -> 10.0.2.31 SSHv2 Encrypted request packet len=1448 4.963239 10.0.2.27 -> 10.0.2.31 SSHv2 [TCP Previous segment lost] Encrypted request packet len=1448 4.963244 10.0.2.31 -> 10.0.2.27 TCP ssh > 60952 [ACK] Seq=1789 Ack=5829 Win=18320 Len=0 TSV=5310075 TSER=2056922197 SLE=7277 SRE=8725 4.963780 10.0.2.27 -> 10.0.2.31 SSHv2 Encrypted request packet len=1448 4.963785 10.0.2.31 -> 10.0.2.27 TCP [TCP Dup ACK 46#1] ssh > 60952 [ACK] Seq=1789 Ack=5829 Win=18320 Len=0 TSV=5310076 TSER=2056922197 SLE=7277 SRE=10173 5.178550 10.0.2.27 -> 10.0.2.31 SSHv2 [TCP Retransmission] Encrypted request packet len=1448 5.178557 10.0.2.31 -> 10.0.2.27 TCP ssh > 60952 [ACK] Seq=1789 Ack=10173 Win=21216 Len=0 TSV=5310290 TSER=2056922413 5.179217 10.0.2.27 -> 10.0.2.31 SSHv2 [TCP Previous segment lost] Encrypted request packet len=1448 5.179221 10.0.2.31 -> 10.0.2.27 TCP [TCP Dup ACK 50#1] ssh > 60952 [ACK] Seq=1789 Ack=10173 Win=21216 Len=0 TSV=5310291 TSER=2056922413 SLE=11621 SRE=13069 5.179741 10.0.2.27 -> 10.0.2.31 SSHv2 Encrypted request packet len=1448 5.179745 10.0.2.31 -> 10.0.2.27 TCP [TCP Dup ACK 50#2] ssh > 60952 [ACK] Seq=1789 Ack=10173 Win=21216 Len=0 TSV=5310292 TSER=2056922413 SLE=11621 SRE=14517 5.180252 10.0.2.27 -> 10.0.2.31 SSHv2 Encrypted request packet len=1448 5.180255 10.0.2.31 -> 10.0.2.27 TCP [TCP Dup ACK 50#3] ssh > 60952 [ACK] Seq=1789 Ack=10173 Win=21216 Len=0 TSV=5310292 TSER=2056922413 SLE=11621 SRE=15965 5.391515 10.0.2.27 -> 10.0.2.31 SSHv2 [TCP Retransmission] Encrypted request packet len=1448 5.391520 10.0.2.31 -> 10.0.2.27 TCP ssh > 60952 [ACK] Seq=1789 Ack=15965 Win=24112 Len=0 TSV=5310503 TSER=2056922626 5.392043 10.0.2.27 -> 10.0.2.31 SSHv2 Encrypted request packet len=1448 5.392048 10.0.2.31 -> 10.0.2.27 TCP ssh > 60952 [ACK] Seq=1789 Ack=17413 Win=27008 Len=0 TSV=5310504 TSER=2056922626 5.603540 10.0.2.27 -> 10.0.2.31 SSHv2 [TCP Out-Of-Order] Encrypted request packet len=1448 5.603546 10.0.2.31 -> 10.0.2.27 TCP [TCP Dup ACK 60#1] ssh > 60952 [ACK] Seq=1789 Ack=17413 Win=27008 Len=0 TSV=5310715 TSER=2056922838 SLE=15965 SRE=17413 Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet - tg3 driver. # ethtool eth0 Settings for eth0: Supported ports: [ MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: Not reported Advertised auto-negotiation: No Speed: 100Mb/s Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: off Supports Wake-on: g Wake-on: d Current message level: 0x000000ff (255) Link detected: yes Client end : 5.019926 10.0.2.27 -> 10.0.2.31 SSHv2 [TCP Retransmission] Encrypted request packet len=1448 5.020438 10.0.2.31 -> 10.0.2.27 TCP ssh > 35380 [ACK] Seq=1789 Ack=7277 Win=21216 Len=0 TSV=6343633 TSER=2057955472 SLE=4381 SRE=5829 5.020513 10.0.2.27 -> 10.0.2.31 SSHv2 Encrypted request packet len=1448 5.020523 10.0.2.27 -> 10.0.2.31 SSHv2 Encrypted request packet len=1448 5.263902 10.0.2.27 -> 10.0.2.31 SSHv2 [TCP Retransmission] Encrypted request packet len=1448 5.264426 10.0.2.31 -> 10.0.2.27 TCP ssh > 35380 [ACK] Seq=1789 Ack=10173 Win=24112 Len=0 TSV=6343877 TSER=2057955920 5.264464 10.0.2.27 -> 10.0.2.31 SSHv2 [TCP Retransmission] Encrypted request packet len=1448 5.264475 10.0.2.27 -> 10.0.2.31 SSHv2 Encrypted request packet len=1448 5.500935 10.0.2.27 -> 10.0.2.31 SSHv2 [TCP Retransmission] Encrypted request packet len=1448 Client shows retransmissions but no DUP Ack or segment lost messages. Any ideas? I have other servers running with Broadcom BCM5703X chips and using the tg3 driver without problem.

18 years, 9 months

2
7
0 / 0

FC multi version install: re-using partitions

by David Niemi

Yes, generally a multi-version install has been covered just want to know about re-using some of the partitions. /dev/sdc2 7.6G 3.8G 3.5G 53% / /dev/sdc1 145M 31M 107M 22% /boot /dev/shm 1005M 0 1005M 0% /dev/shm /dev/sdc7 9.7G 1.1G 8.1G 12% /home /dev/sdc3 7.7G 2.5G 4.9G 34% /os2 /dev/sdc5 6.7G 938M 5.4G 15% /var I've FC4 i386_x64 installed and for testing compilation would like to install the regular i386 version. Reusing the swap partition should be fine, install /boot onto the / partition instead of causing problems with my main install. The /os2 partition is where I'm going to install the other version. Will it cause problems re-using /home and /var (probably problems with the latter). I'll probably have to backup /home (cp -pR), install, create user(s), login then out and then as root copy everything back. Thanks

18 years, 9 months

2
1
0 / 0

VPN on FC4

by Daniel Masson

Hello list , ... Has anyone configured a VPN on FC4 , ... where can i find a tutorial or guide ?? --------------------------------- Start your day with Yahoo! - make it your home page

18 years, 9 months

6
6
0 / 0

Re: NO ADSL with kernel-smp 2.6.12-1.1376_FC3

by Antonio Montagnani

Bob Chiodini said the following on 31/08/2005 12:53: > On Wed, 2005-08-31 at 11:47 +0200, Antonio Montagnani wrote: > >>Bob Chiodini said the following on 31/08/2005 11:33: >> >>>On Wed, 2005-08-31 at 07:52 +0200, Antonio Montagnani wrote: >>> >>> >>>>Edward Dekkers said the following on 31/08/2005 06:26: >>>> >>>> >>>>>Antonio Montagnani wrote: >>>>> >>>>> >>>>> >>>>>>Antonio Montagnani said the following on 30/08/2005 09:16: >>>>>> >>>>>> >>>>>> >>>>>>>Edward Dekkers said the following on 30/08/2005 09:06: >>>>>>> >>>>>>> >>>>>>> >>>>>>>>Antonio Montagnani wrote: >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>>I cannot connect to my ADSL Internet if I use SMP kernel, while >>>>>>>>>with standard 2.6.12-1.1376 kernel on same machine, it works >>>>>>>>>flawlessly. >>>>>>>>>The modem works, Ethernet network is on but connection is refused >>>>>>>>>Shall I file a bug?? >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>No, >>>>>>>> >>>>>>>>There is no real difference between running a standard kernel or an >>>>>>>>SMP one. Bar the fact that SMP will actually use the two processors >>>>>>>>in your machine that is. I run SMP myself, and it makes no >>>>>>>>difference to my connection running standard or SMP kernel. >>>>>>>> >>>>>>>>I'd look at doing some other diagnostic work before filing a report. >>>>>>>> >>>>>>>>We can't help you for the rest because you don't explain your set up. >>>>>>>> >>>>>>>>Regards, >>>>>>>>Ed. >>>>>>>> >>>>>>> >>>>>>>My setup is very standard, a Pentium 4 Asus motherboard P5P800, 1 GB, >>>>>>>two network cards (the integrated is connected to my network, the >>>>>>>Realtek 8029 to my ethernet modem). >>>>>>>Which diagnostic shall I check?? >>>>>>> >>>>>> >>>>>>upgraded to FC4, same behaviour also with 2.6.12-1.447smp >>>>>> >>>>>>where to look??? >>>>>> >>>>> >>>>>Number one would be to see if the Realtek interface actually comes up - >>>>>then there's a whole slew of tools like ifconfig, ping, iptraf, dhclient >>>>>etc. to be used one by one to see where the problem lies. >>>>> >>>>>When I asked you to provide more details, I wasn't really after >>>>>motherboard and stuff like that, I was after your internet connection >>>>>details of course. This is how I would describe one for example: >>>>> >>>>>Maestro Woomera Serial modem connected to /dev/ttyS0 >>>>>Using pppd on demand/wvdial to make a connection >>>>>The IP address on that interface (ppp0) is assigned dynamically by my isp. >>>>>The log shows dialling to be ok, and pppd taking over the connection >>>>>once wvdial has established it. >>>>>ifconfig shows an IP allocated to me ip address: 203.0.178.191 with >>>>>netmask 255.255.255.0. >>>>>I can ping internal addresses and external ones by name >>>>>(www.microsoft.com) and number (207.46.199.60). >>>>> >>>>>This is in the case of dial-up. Your trace will be different. >>>>> >>>>>Really, you have provided nothing of use in diagnosing this problem. I'm >>>>>assuming your modem takes care of the connection and just gives you an >>>>>internal IP address which you set to the gateway? or do you need to run >>>>>PPPoE or some other protocol manually? >>>>> >>>>>You must assume we know nothing about your set-up when posting to this >>>>>list. >>>>> >>>>>Regards, >>>>>Ed. >>>> >>>> Ed, >>>> >>>>it seems that I can't ping the Ethernet modem when using SMP >>>>kernel(destination unreachable), if I connet to ist internal webpage I >>>>get a message of no routing. >>>>I have iptables running: and everything is o.k on standard kernel!!! >>>>What is happening??? >>>> >>>>-- >>>> Antonio >>> >>> >>>Anything relevant in /var/log/messages? What is the output of route -n? >>> >>>Bob... >>> >> >>I had a look at /var/log/messages (that I attach, only as e-mail to >>you...), but I am not very expert. >>I see a timeout transmit on eth0 repeated many times when using SMP >>kernel at about 6.35 at the end. >>I see also many errors conencted to ACPI (on both kernels) that I am not >>able to decode >> >>Tnx >> > > > Antonio, > > I culled the messages down into a SMP boot and a UP boot. A quick look > indicates one message is missing in the SMP boot log. It's marked with > an arrow and indicates that the eth0 device interrupt was detected as > IRQ 11 (UP only). Hopefully someone can shed some light on this. Some > other information that might help: > > cat /proc/interrupts for both the UP and SMP. > > Also, do you have the latest BIOS installed for your motherboard? What > kind of motherboard is this? An Asus P5P800, Bios updated in July Check the IO-APIC options in the BIOS > setup. > > You might try moving the realtek NIC to another slot. That's a shot in > the dark, but it's pretty early and I'm only into my first cup of > coffee! > > Bob... > Standard CPU0 0: 20180445 XT-PIC timer 1: 5563 XT-PIC i8042 2: 0 XT-PIC cascade 5: 701131 XT-PIC SysKonnect SK-98xx, Intel ICH5, ehci_hcd:usb1, uhci_hcd:usb3 8: 1 XT-PIC rtc 11: 380784 XT-PIC uhci_hcd:usb2, uhci_hcd:usb4, uhci_hcd:usb5, eth0 12: 801086 XT-PIC i8042 14: 112972 XT-PIC ide0 15: 358109 XT-PIC ide1 NMI: 0 ERR: 0 SMP CPU0 CPU1 0: 137004 48896 IO-APIC-edge timer 1: 29 27 IO-APIC-edge i8042 5: 0 0 IO-APIC-edge SysKonnect SK-98xx, Intel ICH5, ehci _hcd:usb1, uhci_hcd:usb3 8: 1 0 IO-APIC-edge rtc 11: 0 0 IO-APIC-edge uhci_hcd:usb2, uhci_hcd:usb4, uhci_h cd:usb5, eth0 12: 1146 836 IO-APIC-edge i8042 14: 9294 5957 IO-APIC-edge ide0 15: 440 568 IO-APIC-edge ide1 NMI: 0 0 LOC: 181971 182055 ERR: 0 MIS: 0 I am wondering if the two kernels have different management of iptables, in particular IPv4 or IPv6, another shot in the dark, even if is afternoon here tnx -- Antonio Montagnani Mob.+393386586046 ========================================================== Mail by Thunderbird 1.0.6 Websurfing by Firefox 1.0.6 ========================================================== Linux Fedora Core 4 on Home Linux user number 362582 ==========================================================

18 years, 9 months

3
7
0 / 0

RE: Cheap way to practice clustering?

by James Montz

If you just want to play and learn with Failover, you don't have to have a multi-host aware storage solution. I have a couple of test servers setup, just using their local disk for storage. I have setup several services (httpd, sendmail, imap, and virtual IP) to fail over between the two servers, and has suited my needs. And if you really wanted to test an external storage source, you could use an NFS mount. The only difference in a production environment will be the presence of the storage system, and this is basically just handled by defining the shared file system as a shared resource. -----Original Message----- From: fedora-list-bounces(a)redhat.com [mailto:fedora-list-bounces@redhat.com] On Behalf Of Thomas Cameron Sent: Wednesday, August 31, 2005 8:34 AM To: fedora-list(a)redhat.com Subject: Cheap way to practice clustering? Hi all - I posted about using firewire for clustering practice a couple of days ago. It turns out that this apparently requires a special, very expensive firewire solution. So I want to play around with clustering (as in high availability clustering a la Red Hat Cluster Suite, not computational clustering) at home so that I can become more proficient. The problem is, I don't want to buy a multi-thousand dollar SAN for my house. I wanted to find a way to do clustering on the cheap. I am not sure what path to take, so I am going to toss it to the list to see if anyone has any suggestions. I am totally open to older/used equipment. >From what I've been told, I need a storage device which is multi-host aware, so plain old firewire or even SCSI JBOD won't do. I've been looking at the specs at http://www.redhat.com/software/rha/cluster/hardware/. I'm leaning towards VMWare at this point, but I'd rather do it for real than in virtual machines. Any pointers? Thanks! Thomas -- fedora-list mailing list fedora-list(a)redhat.com To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list

18 years, 9 months

3
2
0 / 0

FC3: Java and 2.6.12-1.1372 FC3smp

by "Peter Müller"

Hi, with kernel 2.6.12-1.1372_FC3smp no Java-Application (DBVisualiser, MKS, JBoss) is able to create a network-connection to another server/database. All other (native) applications are running without any problems. Any hint's !? with best regards peter -- GMX DSL = Maximale Leistung zum minimalen Preis! 2000 MB nur 2,99, Flatrate ab 4,99 Euro/Monat: http://www.gmx.net/de/go/dsl

18 years, 9 months

2
2
0 / 0

Pilot link status

by Rodolfo Alcazar Portillo

Status (sync works!): http://mail.gnome.org/archives/gnome-pilot-list/2005-August/msg00014.html Fixes: http://zeniv.linux.org.uk/pub/people/mark_adams/ http://www.spenneberg.org/Evolution/ -- Rodolfo Alcazar rodolfo.alcazar(a)padep.org.bo Netzmanager Padep, GTZ 591-70656800, -22417628 LA PAZ, BOLIVIA -- Luke Skywalker: Alright, I'll give it a try. Yoda: No! Try not. Do... or do not. There is no try.

18 years, 9 months

2
1
0 / 0

← Newer
1
...
7
8
9
10
11
12
13
...
135
Older →

Jump to page: