Re: Re: Code name for Fedora 9
by Richard England
>From: Aaron Konstam <akonstam(a)sbcglobal.net>
>Date: 2008/01/29 Tue AM 08:57:02 CST
>To: For users of Fedora <fedora-list(a)redhat.com>
>Subject: Re: Code name for Fedora 9
>On Mon, 2008-01-28 at 16:07 -0600, Michael Hennebry wrote:
>> On Mon, 28 Jan 2008, Craig White wrote:
>>
>> > On Mon, 2008-01-28 at 14:49 -0500, Lamar Owen wrote:
>> > > On Monday 28 January 2008, Antonio Olivares wrote:
>> > > > The code name for Fedora 9, scheduled for release on 29 April 2008, will be
>> > > >
>> > > > https://www.redhat.com/archives/fedora-announce-list/2008-January/msg00012.
>> > > >html
>> > >
>> > > Last one to the pun is a rotten egg!
>> > ----
>> > that of course was only 2/3 of a pun... P U
>>
>> Not even that.
>> Even for punning purposes, sulphur != hydrogen sulphide.
>>
>It is sulphur dioxide that has the characeristic rotten eggs smell.
>--
>=======================================================================
>Against stupidity the very gods Themselves contend in vain. -- Friedrich
>von Schiller, "The Maid of Orleans", III, 6
>=======================================================================
>Aaron Konstam telephone: (210) 656-0355 e-mail: akonstam(a)sbcglobal.net
>
>--
>fedora-list mailing list
>fedora-list(a)redhat.com
>To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
No, Michael had it right
http://en.wikipedia.org/wiki/Sulfur_dioxide
http://en.wikipedia.org/wiki/Hydrogen_sulfide
~~R
~~R
16 years, 4 months
- 1
- 0
New FC7 install kdm problem on logout
by Gary Stainburn
Hi folks.
I've installed FC7 onto a system that used to run FC5 no problems. However I
now have one annoying problem.
When I boot up or change to init 5 kdm displays and works fine. However, if I
log out kdm fails to re-display. The screen displays 'Mode Not Supported' and
the screen/kayboard etc. hangs. I can ssh from another box and reboot the
computer which then displays the kdm properly again.
I've re-run system-config-display a new times, and it detects the display
adaptor and LCD screen correctly, but then comes up with 'Mode Not Supported'
message again.
Display: S3 Inc. VT8375 [ProSavage8 KM266/KL266]
Monitor: Proview EM-170 detected as CY765
'yum update' says that the system is up to date
Can anyone suggest possible solutions.
Below is the /etc/X11/xorg.conf file.
# Xorg configuration created by system-config-display
Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "gb"
Option "XkbOptions" "altwin:left_meta_win"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "savage"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
DefaultDepth 16
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "1280x960" "1280x800" "1280x720" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1280x1024" "1280x960" "1280x800" "1280x720" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
--
Gary Stainburn
This email does not contain private or confidential material as it
may be snooped on by interested government parties for unknown
and undisclosed purposes - Regulation of Investigatory Powers Act, 2000
16 years, 4 months
- 2
- 4
Unload Ath5k module
by Sieranski, Greg
I have a Atheros Communications, Inc. AR5418 802.11a/b/g/n Wireless PCI
Express Adapter (rev 01)wireless card and at this time the ath5k driver
does not support it. I have been having success using madwifi (ath_pci)
and would like to unload the ath5k module for now. Is it just a simple
modprobe -e ath5k? Will that prevent it from loading back up on startup?
Thanks,
Greg Sieranski
16 years, 4 months
- 1
- 1
NM in manual mode.
by Aaron Konstam
I have got to ask. Exactly what is meant by using NM in manual mode?
--
=======================================================================
Satire is what closes in New Haven.
=======================================================================
Aaron Konstam telephone: (210) 656-0355 e-mail: akonstam(a)sbcglobal.net
16 years, 4 months
- 2
- 2
how to debug glibc on fedora.
by PawelCarqowski
Hallo group members.
Do You know any document that would be usable for this.
Initially I thought that I could use glibc-debuginfo, but this is optimized and does not have complete debug information. For example there is no debug information for "socket" system call.
regards,
Pawel
16 years, 4 months
- 1
- 0
package manager problems: rpm db corruption|glibc detected double-linked|etc
by Development discussions related to Fedora
Hi, I started having trouble a few days ago with basic yum and rpm
commands; they would seem to work, but finish with a Segmentation fault.
Recent updates [1]:
Basically, one command would work, spit an error just before finishing.
Any further commands would fail. A reboot would allow another single
command to ~almost complete.
This lead me to rpmdb corruption, solved with [2]
However, after reboots and a short time, it seems to recur. So next time
I fix rpmdb, I add forcefsck and autorelabel incase of
filesystem/selinux issues. This didn't flag any errors.
The machine runs fine using thunderbird. But I might find that after
starting firefox-google-2nd-3rd-4th result page, that a get a bug buddy
report on gecko.
I also noticed twice where gnome-terminal or firefox would no longer
respond to mouse clicks, although thunderbird was OK and numlock
operational. If I clicked away from thunderbird, then the whole desktop
would be unresponsive, and numlock no longer change state.
strl-alt-backspace nor ctrl-alt-delete would achieve anything, and I
ended up having to hw reset.
I also found using package-cleanup --problems that about 50 or more
packages noted as missing their requirements. However, the files are on
disk; they just aren't in the rpmdb. [2] didn't suddenly make it all
good, so I have yum install any missing packages in groups of 5 or so
packages, with apparent success the first time. But then next time I get
errors like: [full log in [3]]
a. Segmentation fault
b. *** glibc detected *** /usr/bin/python: corrupted double-linked list:
0x0d897150 ***
c. Fatal Python error: Inconsistent interned string state.
Aborted
Since I have no idea of the cause; once I receive one of the errors, I
restart in runlevel 1-rebuild db-restart.
Love some help with getting it back to it's former reliable self.
DaveT.
===
[1] updates:
Jan 19 18:38:24 Updated: docbook-utils-pdf - 0.6.14-11.fc8.noarch
Jan 20 21:08:05 Erased: mplayer
Jan 20 21:09:59 Installed: mplayer - 1.0-0.88.rc2.lvn8.i386
Jan 20 21:11:27 Installed: mplayer-gui - 1.0-0.88.rc2.lvn8.i386
Jan 21 22:18:39 Installed: info - 4.11-3.fc8.i386
Jan 21 22:18:42 Installed: libnl - 1.0-0.10.pre5.4.i386
Jan 21 22:18:44 Installed: findutils - 1:4.2.31-2.fc8.i386
Jan 21 22:18:45 Installed: readline - 5.2-7.fc8.i386
Jan 21 22:18:49 Installed: parted - 1.8.6-10.fc8.i386
Jan 21 22:18:50 Installed: nash - 6.0.19-4.fc8.i386
Jan 21 22:18:53 Installed: mingetty - 1.07-6.i386
Jan 21 22:18:56 Installed: iproute - 2.6.22-2.fc8.i386
Jan 21 22:19:07 Installed: initscripts - 8.60-1.i386
Jan 21 22:19:10 Installed: udev - 118-1.fc8.i386
Jan 21 22:19:13 Installed: mdadm - 2.6.2-5.fc8.i386
Jan 21 22:19:15 Installed: mkinitrd - 6.0.19-4.fc8.i386
Jan 21 22:19:56 Installed: kernel - 2.6.23.9-85.fc8.i686
Jan 24 00:11:29 Installed: libxml2 - 2.6.31-1.fc8.i386
Jan 24 00:11:30 Installed: krb5-libs - 1.6.2-9.fc8.i386
Jan 24 00:11:31 Installed: ORBit2 - 2.14.10-2.fc8.i386
Jan 24 00:11:32 Installed: libXrandr - 1.2.2-1.fc8.i386
Jan 24 00:11:33 Updated: bind-libs - 32:9.5.0-23.b1.fc8.i386
Jan 24 00:11:34 Installed: libidn - 0.6.14-4.i386
Jan 24 00:11:35 Updated: audit-libs - 1.6.5-2.fc8.i386
Jan 24 00:11:35 Updated: libnl - 1.0-0.15.pre8.git20071218.fc8.i386
Jan 24 00:11:39 Installed: mesa-libGL - 7.0.2-2.fc8.i386
Jan 24 00:11:51 Installed: java-1.7.0-icedtea -
1.7.0.0-0.19.b21.snapshot.fc8.i586
Jan 24 00:11:52 Installed: SDL - 1.2.13-1.fc8.i386
Jan 24 00:12:05 Installed: perl - 4:5.8.8-32.fc8.i386
Jan 24 00:12:05 Installed: glew - 1.4.0-4.fc8.i386
Jan 24 00:12:06 Updated: audit-libs-python - 1.6.5-2.fc8.i386
Jan 24 00:12:48 Installed: policycoreutils - 2.0.33-3.fc8.i386
Jan 24 00:12:49 Installed: curl - 7.17.1-1.fc8.i386
Jan 24 00:12:50 Installed: libxslt - 1.1.22-1.fc8.i386
Jan 24 00:12:51 Installed: libXau - 1.0.3-3.fc8.i386
Jan 24 00:12:52 Updated: libupnp - 1.6.3-3.fc8.i386
Jan 24 00:12:59 Updated: hsqldb - 1:1.8.0.8-1jpp.5.fc8.i386
Jan 24 00:13:00 Updated: libXfont - 1.3.1-2.fc8.i386
Jan 24 00:13:05 Installed: hicolor-icon-theme - 0.10-2.noarch
Jan 24 00:13:08 Installed: mesa-libGL-devel - 7.0.2-2.fc8.i386
Jan 24 00:13:08 Installed: libpng-devel - 2:1.2.22-1.fc8.i386
Jan 24 00:13:09 Updated: clamav-filesystem - 0.92-6.fc8.i386
Jan 24 00:13:10 Updated: clamav-data - 0.92-6.fc8.i386
Jan 24 00:13:14 Installed: alsa-lib-devel - 1.0.15-1.fc8.i386
Jan 24 00:13:16 Installed: selinux-policy - 3.0.8-76.fc8.noarch
Jan 24 00:14:13 Updated: selinux-policy-targeted - 3.0.8-76.fc8.noarch
Jan 24 00:14:16 Updated: SDL-devel - 1.2.13-1.fc8.i386
Jan 24 00:14:17 Updated: kde-filesystem - 4-6.fc8.noarch
Jan 24 00:14:24 Updated: gtk2 - 2.12.5-1.fc8.i386
Jan 24 00:14:25 Installed: libglade2 - 2.6.2-3.fc8.i386
Jan 24 00:15:02 Installed: openoffice.org-core - 1:2.3.0-6.11.fc8.i386
Jan 24 00:15:07 Updated: evolution-data-server - 1.12.3-1.fc8.i386
Jan 24 00:15:36 Installed: gnome-panel - 2.20.2-1.fc8.i386
Jan 24 00:15:40 Updated: clamav-lib - 0.92-6.fc8.i386
Jan 24 00:15:44 Updated: openoffice.org-calc - 1:2.3.0-6.11.fc8.i386
Jan 24 00:15:45 Updated: ogre - 1.4.6-2.fc8.i386
Jan 24 00:15:48 Updated: chess - 1.0-11.fc8.i386
Jan 24 00:15:50 Updated: clamav - 0.92-6.fc8.i386
Jan 24 00:15:50 Updated: clamav-update - 0.92-6.fc8.i386
Jan 24 00:15:52 Updated: openoffice.org-math - 1:2.3.0-6.11.fc8.i386
Jan 24 00:15:57 Updated: openoffice.org-impress - 1:2.3.0-6.11.fc8.i386
Jan 24 00:16:05 Updated: gtk2-devel - 2.12.5-1.fc8.i386
Jan 24 00:16:12 Updated: azureus - 3.0.3.4-3.fc8.i386
Jan 24 00:16:14 Updated: libdhcp - 1.27-4.fc8.i386
Jan 24 00:16:15 Updated: audit - 1.6.5-2.fc8.i386
Jan 24 00:16:16 Updated: bind-utils - 32:9.5.0-23.b1.fc8.i386
Jan 24 00:16:18 Updated: bind - 32:9.5.0-23.b1.fc8.i386
Jan 24 00:16:19 Updated: less - 406-14.fc8.i386
Jan 24 00:16:20 Updated: tar - 2:1.17-5.fc8.i386
Jan 24 00:16:40 Installed: gnome-icon-theme - 2.20.0-2.fc8.noarch
Jan 24 00:16:50 Installed: gnome-themes - 2.20.2-1.fc8.noarch
Jan 24 00:16:52 Updated: openoffice.org-langpack-en - 1:2.3.0-6.11.fc8.i386
Jan 24 00:16:54 Installed: gtkhtml3 - 3.16.3-1.fc8.i386
Jan 24 00:16:55 Updated: NetworkManager-glib -
1:0.7.0-0.6.7.svn3204.fc8.i386
Jan 24 00:16:57 Updated: NetworkManager - 1:0.7.0-0.6.7.svn3204.fc8.i386
Jan 24 00:17:52 Updated: evolution - 2.12.3-1.fc8.i386
Jan 24 00:17:56 Updated: NetworkManager-gnome -
1:0.7.0-0.6.7.svn3204.fc8.i386
Jan 24 21:59:14 Installed: clamav-server - 0.92-6.fc8.i386
Jan 24 21:59:14 Installed: clamav-server-sysv - 0.92-6.fc8.i386
Jan 25 21:30:50 Installed: elfutils-libelf-devel - 0.131-1.fc8.i386
=====
[2] www.rpm.org --
rm /var/lib/rpm/__db.00*
time rpm -vv --rebuilddb
{cause it takes a while}, but seems to be successful.
=====
[3]
yum error after install:
Installing:
bluecurve-icon-theme noarch 8.0.0-1.fc8 fedora
5.1 M
faad2 i386 2.5-2.fc7 freshrpms
194 k
festival i386 1.96-1.fc7 fedora
1.4 M
gcc i386 4.1.2-33 fedora
5.2 M
gdm i386 1:2.20.2-2.fc8 updates
4.4 M
gimp i386 2:2.4.3-1.fc8 updates
14 M
gsm i386 1.0.12-5.fc8 fedora
28 k
libxml2-devel i386 2.6.31-1.fc8 updates
2.1 M
pyorbit i386 2.14.3-1.fc8 fedora
49 k
rhpxl i386 0.49-2.fc8 fedora
98 k
system-config-printer-libs i386 0.7.74.4-3.fc8 fedora
464 k
tetex i386 3.0-44.3.fc8 updates
13 M
urw-fonts noarch 2.4-2.fc8 updates
3.2 M
Installing for dependencies:
foomatic i386 3.0.2-52.fc8 fedora
16 M
gimp-libs i386 2:2.4.3-1.fc8 updates
575 k
kudzu i386 1.2.79.2-1 updates
215 k
pyxf86config i386 0.3.34-1.fc8 fedora
60 k
tetex-fonts i386 3.0-44.3.fc8 updates
29 M
tmpwatch i386 2.9.11-2 fedora
19 k
xdg-utils noarch 1.0.2-4.fc8 updates
51 k
xkeyboard-config noarch 1.1-3.fc8 fedora
448 k
xorg-x11-drv-void i386 1.1.1-6.fc8 fedora
9.6 k
xorg-x11-server-Xorg i386 1.3.0.0-40.fc8 updates
2.9 M
Transaction Summary
=============================================================================
Install 23 Package(s)
Update 0 Package(s)
Remove 0 Package(s)
Total download size: 99 M
Is this ok [y/N]: y
Downloading Packages:
Running rpm_check_debug
Running Transaction Test
Finished Transaction Test
Transaction Test Succeeded
Running Transaction
Installing: gimp-libs ####################### [ 1/23]
Installing: pyxf86config ####################### [ 2/23]
Installing: kudzu ####################### [ 3/23]
Installing: tmpwatch ####################### [ 4/23]
Installing: foomatic ####################### [ 5/23]
Installing: tetex-fonts ####################### [ 6/23]
Installing: tetex ####################### [ 7/23]
warning: /usr/share/texmf-var/fonts/map/dvipdfm/updmap/dvipdfm_dl14.map
created as
/usr/share/texmf-var/fonts/map/dvipdfm/updmap/dvipdfm_dl14.map.rpmnew
warning: /usr/share/texmf-var/fonts/map/dvipdfm/updmap/dvipdfm_ndl14.map
created as
/usr/share/texmf-var/fonts/map/dvipdfm/updmap/dvipdfm_ndl14.map.rpmnew
warning: /usr/share/texmf-var/fonts/map/pdftex/updmap/pdftex_dl14.map
created as
/usr/share/texmf-var/fonts/map/pdftex/updmap/pdftex_dl14.map.rpmnew
warning: /usr/share/texmf-var/fonts/map/pdftex/updmap/pdftex_ndl14.map
created as
/usr/share/texmf-var/fonts/map/pdftex/updmap/pdftex_ndl14.map.rpmnew
Installing: system-config-printer-libs ####################### [ 8/23]
Installing: faad2 ####################### [ 9/23]
Installing: pyorbit ####################### [10/23]
Installing: gdm ####################### [11/23]
Installing: festival ####################### [12/23]
Installing: gsm ####################### [13/23]
Installing: gcc ####################### [14/23]
Installing: xdg-utils ####################### [15/23]
Installing: xkeyboard-config ####################### [16/23]
Installing: bluecurve-icon-theme ####################### [17/23]
Installing: urw-fonts ####################### [18/23]
Installing: libxml2-devel ####################### [19/23]
Installing: gimp ####################### [20/23]
Installing: xorg-x11-server-Xorg ####################### [21/23]
Installing: xorg-x11-drv-void ####################### [22/23]
Installing: rhpxl ####################### [23/23]
Installed: bluecurve-icon-theme.noarch 0:8.0.0-1.fc8 faad2.i386
0:2.5-2.fc7 festival.i386 0:1.96-1.fc7 gcc.i386 0:4.1.2-33 gdm.i386
1:2.20.2-2.fc8 gimp.i386 2:2.4.3-1.fc8 gsm.i386 0:1.0.12-5.fc8
libxml2-devel.i386 0:2.6.31-1.fc8 pyorbit.i386 0:2.14.3-1.fc8 rhpxl.i386
0:0.49-2.fc8 system-config-printer-libs.i386 0:0.7.74.4-3.fc8 tetex.i386
0:3.0-44.3.fc8 urw-fonts.noarch 0:2.4-2.fc8
Dependency Installed: foomatic.i386 0:3.0.2-52.fc8 gimp-libs.i386
2:2.4.3-1.fc8 kudzu.i386 0:1.2.79.2-1 pyxf86config.i386 0:0.3.34-1.fc8
tetex-fonts.i386 0:3.0-44.3.fc8 tmpwatch.i386 0:2.9.11-2
xdg-utils.noarch 0:1.0.2-4.fc8 xkeyboard-config.noarch 0:1.1-3.fc8
xorg-x11-drv-void.i386 0:1.1.1-6.fc8 xorg-x11-server-Xorg.i386
0:1.3.0.0-40.fc8
Complete!
Fatal Python error: Inconsistent interned string state.
Aborted
=====
Parsing package install arguments
Package perl - 4:5.8.8-32.fc8.i386 is already installed.
Package xdg-utils - 1.0.2-4.fc8.noarch is already installed.
No Match for argument: rpm=python
No package rpm=python available.
Segmentation fault
[root@davidtdesktop ~]# yum install groff nroff-i18n unixODBC
desktop-backgrounds-basic eel2 nscd fuse indent perl xdg-utils
plague-common kbd libpcap python-setuptools rpm-python
Loading "downloadonly" plugin
Loading "skip-broken" plugin
Setting up Install Process
Parsing package install arguments
Package perl - 4:5.8.8-32.fc8.i386 is already installed.
Package xdg-utils - 1.0.2-4.fc8.noarch is already installed.
Segmentation fault
[root@davidtdesktop ~]#
[root@davidtdesktop ~]#
====
# yum -d 10 install netpbm-progs fslint gnome-terminal nmap-frontend
Loading "downloadonly" plugin
Loading "skip-broken" plugin
Running "config" handler for "downloadonly" plugin
Running "config" handler for "skip-broken" plugin
Yum Version: 3.2.8
COMMAND: yum -d 10 install netpbm-progs fslint gnome-terminal nmap-frontend
Installroot: /
Ext Commands:
netpbm-progs
fslint
gnome-terminal
nmap-frontend
Reading Local RPMDB
Setting up Package Sacks
Running "postreposetup" handler for "downloadonly" plugin
Setting up Install Process
Parsing package install arguments
skipping reposetup, pkgsack exists
No other netpbm-progs installed, adding to list for potential install
No other netpbm-progs installed, adding to list for potential install
skipping reposetup, pkgsack exists
No other fslint installed, adding to list for potential install
skipping reposetup, pkgsack exists
No other gnome-terminal installed, adding to list for potential install
No other gnome-terminal installed, adding to list for potential install
skipping reposetup, pkgsack exists
No other nmap-frontend installed, adding to list for potential install
No other nmap-frontend installed, adding to list for potential install
reduced installs :
netpbm-progs.i386 0:10.35.32-2.fc8
Building updates object
skipping reposetup, pkgsack exists
skipping reposetup, pkgsack exists
putting pulseaudio-module-gconf in complex update
putting python-turbokid in complex update
putting glew in complex update
putting hwdata in complex update
putting glibc in complex update
putting glib-java in complex update
putting pulseaudio-libs-glib2 in complex update
putting xterm in complex update
putting cairo-java in complex update
putting allegro in complex update
putting pulseaudio-utils in complex update
putting pulseaudio-module-x11 in complex update
putting openssl in complex update
putting libgconf-java in complex update
putting liberation-fonts in complex update
putting perl-Test-Simple in complex update
putting pulseaudio-esound-compat in complex update
putting logrotate in complex update
putting kernel in complex update
putting libgtk-java in complex update
putting libbeagle in complex update
putting pulseaudio in complex update
putting perl-Test-Harness in complex update
putting pulseaudio-core-libs in complex update
putting kernel-headers in complex update
putting pulseaudio-libs-zeroconf in complex update
putting docbook-style-xsl in complex update
putting pulseaudio-libs in complex update
putting kernel in complex update
putting xine-lib in complex update
processing pulseaudio-module-gconf
processing python-turbokid
processing glew
processing hwdata
processing glibc.i686
processing glib-java
processing pulseaudio-libs-glib2
processing xterm
processing cairo-java
processing allegro
processing pulseaudio-utils
processing pulseaudio-module-x11
processing openssl
processing libgconf-java
processing liberation-fonts
processing perl-Test-Simple
processing pulseaudio-esound-compat
processing logrotate
processing kernel.i686
processing libgtk-java
processing libbeagle
processing pulseaudio
processing perl-Test-Harness
processing pulseaudio-core-libs
processing kernel-headers
processing pulseaudio-libs-zeroconf
processing docbook-style-xsl
processing pulseaudio-libs
processing kernel.i686
processing xine-lib
nmap-frontend.i386 2:4.52-1.fc8
fslint.noarch 0:2.24-1.fc8
gnome-terminal.i386 0:2.18.3-1.fc8
Resolving Dependencies
1201400999.51
Running "preresolve" handler for "skip-broken" plugin
--> Running transaction check
---> Package fslint.noarch 0:2.24-1.fc8 set to be updated
Checking deps for fslint.noarch 0-2.24-1.fc8 - u
looking for (u'cpio', None, (None, None, None)) as a requirement of
fslint.noarch 0-2.24-1.fc8 - u
looking for (u'python', u'GE', (u'0', u'2.0', None)) as a requirement of
fslint.noarch 0-2.24-1.fc8 - u
looking for (u'pygtk2-libglade', None, (None, None, None)) as a
requirement of fslint.noarch 0-2.24-1.fc8 - u
looking for (u'pygtk2', None, (None, None, None)) as a requirement of
fslint.noarch 0-2.24-1.fc8 - u
looking for (u'/bin/bash', None, (None, None, None)) as a requirement of
fslint.noarch 0-2.24-1.fc8 - u
looking for (u'/usr/bin/env', None, (None, None, None)) as a requirement
of fslint.noarch 0-2.24-1.fc8 - u
looking for (u'/bin/sh', None, (None, None, None)) as a requirement of
fslint.noarch 0-2.24-1.fc8 - u
looking for (u'/usr/bin/python', None, (None, None, None)) as a
requirement of fslint.noarch 0-2.24-1.fc8 - u
---> Package netpbm-progs.i386 0:10.35.32-2.fc8 set to be updated
Checking deps for netpbm-progs.i386 0-10.35.32-2.fc8 - u
looking for (u'libc.so.6(GLIBC_2.4)', None, (None, None, None)) as a
requirement of netpbm-progs.i386 0-10.35.32-2.fc8 - u
looking for (u'perl(Cwd)', None, (None, None, None)) as a requirement of
netpbm-progs.i386 0-10.35.32-2.fc8 - u
looking for (u'libc.so.6(GLIBC_2.0)', None, (None, None, None)) as a
requirement of netpbm-progs.i386 0-10.35.32-2.fc8 - u
looking for (u'rtld(GNU_HASH)', None, (None, None, None)) as a
requirement of netpbm-progs.i386 0-10.35.32-2.fc8 - u
looking for (u'perl(Getopt::Long)', None, (None, None, None)) as a
requirement of netpbm-progs.i386 0-10.35.32-2.fc8 - u
looking for (u'libjpeg.so.62', None, (None, None, None)) as a
requirement of netpbm-progs.i386 0-10.35.32-2.fc8 - u
looking for (u'/usr/bin/perl', None, (None, None, None)) as a
requirement of netpbm-progs.i386 0-10.35.32-2.fc8 - u
looking for (u'/bin/sh', None, (None, None, None)) as a requirement of
netpbm-progs.i386 0-10.35.32-2.fc8 - u
looking for (u'libm.so.6', None, (None, None, None)) as a requirement of
netpbm-progs.i386 0-10.35.32-2.fc8 - u
looking for (u'libX11.so.6', None, (None, None, None)) as a requirement
of netpbm-progs.i386 0-10.35.32-2.fc8 - u
looking for (u'perl(File::Spec)', None, (None, None, None)) as a
requirement of netpbm-progs.i386 0-10.35.32-2.fc8 - u
looking for (u'perl(File::Basename)', None, (None, None, None)) as a
requirement of netpbm-progs.i386 0-10.35.32-2.fc8 - u
looking for (u'libz.so.1', None, (None, None, None)) as a requirement of
netpbm-progs.i386 0-10.35.32-2.fc8 - u
looking for (u'libc.so.6', None, (None, None, None)) as a requirement of
netpbm-progs.i386 0-10.35.32-2.fc8 - u
looking for (u'libpng12.so.0', None, (None, None, None)) as a
requirement of netpbm-progs.i386 0-10.35.32-2.fc8 - u
looking for (u'libm.so.6(GLIBC_2.0)', None, (None, None, None)) as a
requirement of netpbm-progs.i386 0-10.35.32-2.fc8 - u
looking for (u'libc.so.6(GLIBC_2.3)', None, (None, None, None)) as a
requirement of netpbm-progs.i386 0-10.35.32-2.fc8 - u
looking for (u'libc.so.6(GLIBC_2.3.4)', None, (None, None, None)) as a
requirement of netpbm-progs.i386 0-10.35.32-2.fc8 - u
looking for (u'perl(Errno)', None, (None, None, None)) as a requirement
of netpbm-progs.i386 0-10.35.32-2.fc8 - u
looking for (u'libc.so.6(GLIBC_2.1)', None, (None, None, None)) as a
requirement of netpbm-progs.i386 0-10.35.32-2.fc8 - u
looking for (u'perl(English)', None, (None, None, None)) as a
requirement of netpbm-progs.i386 0-10.35.32-2.fc8 - u
looking for (u'perl', u'GE', (u'1', u'5.0', None)) as a requirement of
netpbm-progs.i386 0-10.35.32-2.fc8 - u
looking for (u'perl(File::Temp)', None, (None, None, None)) as a
requirement of netpbm-progs.i386 0-10.35.32-2.fc8 - u
looking for (u'perl(strict)', None, (None, None, None)) as a requirement
of netpbm-progs.i386 0-10.35.32-2.fc8 - u
looking for (u'libpng12.so.0(PNG12_0)', None, (None, None, None)) as a
requirement of netpbm-progs.i386 0-10.35.32-2.fc8 - u
looking for (u'libnetpbm.so.10', None, (None, None, None)) as a
requirement of netpbm-progs.i386 0-10.35.32-2.fc8 - u
looking for (u'libtiff.so.3', None, (None, None, None)) as a requirement
of netpbm-progs.i386 0-10.35.32-2.fc8 - u
looking for (u'netpbm', u'EQ', (u'0', u'10.35.32', u'2.fc8')) as a
requirement of netpbm-progs.i386 0-10.35.32-2.fc8 - u
looking for (u'libc.so.6(GLIBC_2.7)', None, (None, None, None)) as a
requirement of netpbm-progs.i386 0-10.35.32-2.fc8 - u
looking for (u'perl(Fcntl)', None, (None, None, None)) as a requirement
of netpbm-progs.i386 0-10.35.32-2.fc8 - u
---> Package nmap-frontend.i386 2:4.52-1.fc8 set to be updated
Checking deps for nmap-frontend.i386 2-4.52-1.fc8 - u
looking for (u'python(abi)', u'EQ', (u'0', u'2.5', None)) as a
requirement of nmap-frontend.i386 2-4.52-1.fc8 - u
looking for (u'pygtk2', None, (None, None, None)) as a requirement of
nmap-frontend.i386 2-4.52-1.fc8 - u
looking for (u'nmap', u'EQ', (u'2', u'4.52', None)) as a requirement of
nmap-frontend.i386 2-4.52-1.fc8 - u
looking for (u'python', u'GE', (u'0', u'2.5', None)) as a requirement of
nmap-frontend.i386 2-4.52-1.fc8 - u
looking for (u'python-sqlite2', None, (None, None, None)) as a
requirement of nmap-frontend.i386 2-4.52-1.fc8 - u
looking for (u'gtk2', None, (None, None, None)) as a requirement of
nmap-frontend.i386 2-4.52-1.fc8 - u
looking for (u'/usr/bin/python', None, (None, None, None)) as a
requirement of nmap-frontend.i386 2-4.52-1.fc8 - u
---> Package gnome-terminal.i386 0:2.18.3-1.fc8 set to be updated
Checking deps for gnome-terminal.i386 0-2.18.3-1.fc8 - u
looking for (u'libm.so.6(GLIBC_2.1)', None, (None, None, None)) as a
requirement of gnome-terminal.i386 0-2.18.3-1.fc8 - u
looking for (u'libc.so.6(GLIBC_2.4)', None, (None, None, None)) as a
requirement of gnome-terminal.i386 0-2.18.3-1.fc8 - u
looking for (u'libpangoxft-1.0.so.0', None, (None, None, None)) as a
requirement of gnome-terminal.i386 0-2.18.3-1.fc8 - u
looking for (u'libXrender.so.1', None, (None, None, None)) as a
requirement of gnome-terminal.i386 0-2.18.3-1.fc8 - u
looking for (u'libgdk-x11-2.0.so.0', None, (None, None, None)) as a
requirement of gnome-terminal.i386 0-2.18.3-1.fc8 - u
looking for (u'rtld(GNU_HASH)', None, (None, None, None)) as a
requirement of gnome-terminal.i386 0-2.18.3-1.fc8 - u
looking for (u'libgnomevfs-2.so.0', None, (None, None, None)) as a
requirement of gnome-terminal.i386 0-2.18.3-1.fc8 - u
looking for (u'libORBit-2.so.0', None, (None, None, None)) as a
requirement of gnome-terminal.i386 0-2.18.3-1.fc8 - u
looking for (u'libXft.so.2', None, (None, None, None)) as a requirement
of gnome-terminal.i386 0-2.18.3-1.fc8 - u
looking for (u'libgtk-x11-2.0.so.0', None, (None, None, None)) as a
requirement of gnome-terminal.i386 0-2.18.3-1.fc8 - u
looking for (u'/bin/sh', None, (None, None, None)) as a requirement of
gnome-terminal.i386 0-2.18.3-1.fc8 - u
looking for (u'libfontconfig.so.1', None, (None, None, None)) as a
requirement of gnome-terminal.i386 0-2.18.3-1.fc8 - u
looking for (u'libatk-1.0.so.0', None, (None, None, None)) as a
requirement of gnome-terminal.i386 0-2.18.3-1.fc8 - u
looking for (u'libgdk_pixbuf-2.0.so.0', None, (None, None, None)) as a
requirement of gnome-terminal.i386 0-2.18.3-1.fc8 - u
looking for (u'libm.so.6', None, (None, None, None)) as a requirement of
gnome-terminal.i386 0-2.18.3-1.fc8 - u
looking for (u'libX11.so.6', None, (None, None, None)) as a requirement
of gnome-terminal.i386 0-2.18.3-1.fc8 - u
looking for (u'libc.so.6(GLIBC_2.2)', None, (None, None, None)) as a
requirement of gnome-terminal.i386 0-2.18.3-1.fc8 - u
looking for (u'libbonobo-2.so.0', None, (None, None, None)) as a
requirement of gnome-terminal.i386 0-2.18.3-1.fc8 - u
looking for (u'libpopt.so.0(LIBPOPT_0)', None, (None, None, None)) as a
requirement of gnome-terminal.i386 0-2.18.3-1.fc8 - u
looking for (u'libc.so.6', None, (None, None, None)) as a requirement of
gnome-terminal.i386 0-2.18.3-1.fc8 - u
looking for (u'libgmodule-2.0.so.0', None, (None, None, None)) as a
requirement of gnome-terminal.i386 0-2.18.3-1.fc8 - u
looking for (u'libdl.so.2', None, (None, None, None)) as a requirement
of gnome-terminal.i386 0-2.18.3-1.fc8 - u
looking for (u'libpthread.so.0(GLIBC_2.0)', None, (None, None, None)) as
a requirement of gnome-terminal.i386 0-2.18.3-1.fc8 - u
looking for (u'libpopt.so.0', None, (None, None, None)) as a requirement
of gnome-terminal.i386 0-2.18.3-1.fc8 - u
looking for (u'libc.so.6(GLIBC_2.3)', None, (None, None, None)) as a
requirement of gnome-terminal.i386 0-2.18.3-1.fc8 - u
looking for (u'libfreetype.so.6', None, (None, None, None)) as a
requirement of gnome-terminal.i386 0-2.18.3-1.fc8 - u
looking for (u'libpangox-1.0.so.0', None, (None, None, None)) as a
requirement of gnome-terminal.i386 0-2.18.3-1.fc8 - u
looking for (u'libbonobo-activation.so.4', None, (None, None, None)) as
a requirement of gnome-terminal.i386 0-2.18.3-1.fc8 - u
looking for (u'libICE.so.6', None, (None, None, None)) as a requirement
of gnome-terminal.i386 0-2.18.3-1.fc8 - u
looking for (u'libc.so.6(GLIBC_2.3.4)', None, (None, None, None)) as a
requirement of gnome-terminal.i386 0-2.18.3-1.fc8 - u
looking for (u'libcairo.so.2', None, (None, None, None)) as a
requirement of gnome-terminal.i386 0-2.18.3-1.fc8 - u
looking for (u'libgnomecanvas-2.so.0', None, (None, None, None)) as a
requirement of gnome-terminal.i386 0-2.18.3-1.fc8 - u
looking for (u'libbonoboui-2.so.0', None, (None, None, None)) as a
requirement of gnome-terminal.i386 0-2.18.3-1.fc8 - u
looking for (u'libxml2.so.2', None, (None, None, None)) as a requirement
of gnome-terminal.i386 0-2.18.3-1.fc8 - u
looking for (u'libgthread-2.0.so.0', None, (None, None, None)) as a
requirement of gnome-terminal.i386 0-2.18.3-1.fc8 - u
looking for (u'libglib-2.0.so.0', None, (None, None, None)) as a
requirement of gnome-terminal.i386 0-2.18.3-1.fc8 - u
looking for (u'libpthread.so.0', None, (None, None, None)) as a
requirement of gnome-terminal.i386 0-2.18.3-1.fc8 - u
looking for (u'libpangocairo-1.0.so.0', None, (None, None, None)) as a
requirement of gnome-terminal.i386 0-2.18.3-1.fc8 - u
looking for (u'libstartup-notification-1.so.0', None, (None, None,
None)) as a requirement of gnome-terminal.i386 0-2.18.3-1.fc8 - u
looking for (u'libc.so.6(GLIBC_2.0)', None, (None, None, None)) as a
requirement of gnome-terminal.i386 0-2.18.3-1.fc8 - u
looking for (u'librt.so.1', None, (None, None, None)) as a requirement
of gnome-terminal.i386 0-2.18.3-1.fc8 - u
looking for (u'libvte.so.9', None, (None, None, None)) as a requirement
of gnome-terminal.i386 0-2.18.3-1.fc8 - u
looking for (u'libglade-2.0.so.0', None, (None, None, None)) as a
requirement of gnome-terminal.i386 0-2.18.3-1.fc8 - u
looking for (u'libgnome-2.so.0', None, (None, None, None)) as a
requirement of gnome-terminal.i386 0-2.18.3-1.fc8 - u
looking for (u'libgconf-2.so.4', None, (None, None, None)) as a
requirement of gnome-terminal.i386 0-2.18.3-1.fc8 - u
looking for (u'libpangoft2-1.0.so.0', None, (None, None, None)) as a
requirement of gnome-terminal.i386 0-2.18.3-1.fc8 - u
looking for (u'libart_lgpl_2.so.2', None, (None, None, None)) as a
requirement of gnome-terminal.i386 0-2.18.3-1.fc8 - u
looking for (u'scrollkeeper', None, (None, None, None)) as a requirement
of gnome-terminal.i386 0-2.18.3-1.fc8 - u
looking for (u'GConf2', u'GE', (u'0', u'2.14.0', None)) as a requirement
of gnome-terminal.i386 0-2.18.3-1.fc8 - u
looking for (u'libpango-1.0.so.0', None, (None, None, None)) as a
requirement of gnome-terminal.i386 0-2.18.3-1.fc8 - u
looking for (u'libgnomeui-2.so.0', None, (None, None, None)) as a
requirement of gnome-terminal.i386 0-2.18.3-1.fc8 - u
looking for (u'libSM.so.6', None, (None, None, None)) as a requirement
of gnome-terminal.i386 0-2.18.3-1.fc8 - u
looking for (u'libgobject-2.0.so.0', None, (None, None, None)) as a
requirement of gnome-terminal.i386 0-2.18.3-1.fc8 - u
--> Finished Dependency Resolution
Dependency Process ending
Dependencies Resolved
1201401001.53
=============================================================================
Package Arch Version Repository
Size
=============================================================================
Installing:
fslint noarch 2.24-1.fc8 fedora
102 k
gnome-terminal i386 2.18.3-1.fc8 updates
2.5 M
netpbm-progs i386 10.35.32-2.fc8 updates
2.0 M
nmap-frontend i386 2:4.52-1.fc8 updates
901 k
Transaction Summary
=============================================================================
Install 4 Package(s)
Update 0 Package(s)
Remove 0 Package(s)
Total download size: 5.5 M
Is this ok [y/N]: y
Downloading Packages:
using local copy of fslint - 2.24-1.fc8.noarch
using local copy of netpbm-progs - 10.35.32-2.fc8.i386
using local copy of nmap-frontend - 2:4.52-1.fc8.i386
using local copy of gnome-terminal - 2.18.3-1.fc8.i386
Running "postdownload" handler for "downloadonly" plugin
Running rpm_check_debug
Member: fslint.noarch 0-2.24-1.fc8 - u
Adding Package fslint - 2.24-1.fc8.noarch in mode u
Member: netpbm-progs.i386 0-10.35.32-2.fc8 - u
Adding Package netpbm-progs - 10.35.32-2.fc8.i386 in mode u
Member: nmap-frontend.i386 2-4.52-1.fc8 - u
Adding Package nmap-frontend - 2:4.52-1.fc8.i386 in mode u
Member: gnome-terminal.i386 0-2.18.3-1.fc8 - u
Adding Package gnome-terminal - 2.18.3-1.fc8.i386 in mode u
Running Transaction Test
Member: fslint.noarch 0-2.24-1.fc8 - u
Adding Package fslint - 2.24-1.fc8.noarch in mode u
Member: netpbm-progs.i386 0-10.35.32-2.fc8 - u
Adding Package netpbm-progs - 10.35.32-2.fc8.i386 in mode u
Member: nmap-frontend.i386 2-4.52-1.fc8 - u
Adding Package nmap-frontend - 2:4.52-1.fc8.i386 in mode u
Member: gnome-terminal.i386 0-2.18.3-1.fc8 - u
Adding Package gnome-terminal - 2.18.3-1.fc8.i386 in mode u
Finished Transaction Test
Transaction Test Succeeded
Member: fslint.noarch 0-2.24-1.fc8 - u
Adding Package fslint - 2.24-1.fc8.noarch in mode u
Member: netpbm-progs.i386 0-10.35.32-2.fc8 - u
Adding Package netpbm-progs - 10.35.32-2.fc8.i386 in mode u
Member: nmap-frontend.i386 2-4.52-1.fc8 - u
Adding Package nmap-frontend - 2:4.52-1.fc8.i386 in mode u
Member: gnome-terminal.i386 0-2.18.3-1.fc8 - u
Adding Package gnome-terminal - 2.18.3-1.fc8.i386 in mode u
Running Transaction
Installing: nmap-frontend ######################### [1/4]
Installing: fslint ######################### [2/4]
Installing: netpbm-progs ######################### [3/4]
Installing: gnome-terminal ######################### [4/4]
Installed: fslint.noarch 0:2.24-1.fc8 gnome-terminal.i386 0:2.18.3-1.fc8
netpbm-progs.i386 0:10.35.32-2.fc8 nmap-frontend.i386 2:4.52-1.fc8
Complete!
*** glibc detected *** /usr/bin/python: corrupted double-linked list:
0x0d897150 ***
=====
16 years, 4 months
- 7
- 13
necessary dependency for scim-lang RPMs?
by Globe Trotter
I have a clean x86_64 system (only 64-bit packages allowed:-) and was trying to
install scim-lang-* modules.x86_64. I get the following:
yum deplist scim-lang-bengali.x86_64
Finding dependencies:
Importing additional filelist information
package: scim-lang-bengali.x86_64 1.4.7-7.fc8
dependency: m17n-db-bengali
provider: m17n-db-bengali.noarch 1.4.0-6.fc8
dependency: /usr/lib/gtk-2.0/immodules/im-scim-bridge.so
provider: scim-bridge-gtk.i386 0.4.13-4.fc8
provider: scim-bridge-gtk.i386 0.4.14-1.fc8
dependency: scim-m17n
provider: scim-m17n.x86_64 0.2.2-2.fc8
dependency: m17n-contrib-bengali
provider: m17n-contrib-bengali.noarch 1.1.3-3.fc8
dependency: scim-bridge-gtk
provider: scim-bridge-gtk.i386 0.4.13-4.fc8
provider: scim-bridge-gtk.x86_64 0.4.13-4.fc8
provider: scim-bridge-gtk.i386 0.4.14-1.fc8
provider: scim-bridge-gtk.x86_64 0.4.14-1.fc8
dependency: /usr/lib64/gtk-2.0/immodules/im-scim-bridge.so
provider: scim-bridge-gtk.x86_64 0.4.13-4.fc8
provider: scim-bridge-gtk.x86_64 0.4.14-1.fc8
yum deplist scim-lang-hindi.x86_64
Finding dependencies:
Importing additional filelist information
package: scim-lang-hindi.x86_64 1.4.7-7.fc8
dependency: /usr/lib/gtk-2.0/immodules/im-scim-bridge.so
provider: scim-bridge-gtk.i386 0.4.13-4.fc8
provider: scim-bridge-gtk.i386 0.4.14-1.fc8
dependency: scim-m17n
provider: scim-m17n.x86_64 0.2.2-2.fc8
dependency: m17n-contrib-hindi
provider: m17n-contrib-hindi.noarch 1.1.3-3.fc8
dependency: scim-bridge-gtk
provider: scim-bridge-gtk.i386 0.4.13-4.fc8
provider: scim-bridge-gtk.x86_64 0.4.13-4.fc8
provider: scim-bridge-gtk.i386 0.4.14-1.fc8
provider: scim-bridge-gtk.x86_64 0.4.14-1.fc8
dependency: /usr/lib64/gtk-2.0/immodules/im-scim-bridge.so
provider: scim-bridge-gtk.x86_64 0.4.13-4.fc8
provider: scim-bridge-gtk.x86_64 0.4.14-1.fc8
dependency: m17n-db-hindi
provider: m17n-db-hindi.noarch 1.4.0-6.fc8
Are these i386 packages needed or is there an oversight in RPM packaging?
Many thanks,
Trotter
____________________________________________________________________________________
Never miss a thing. Make Yahoo your home page.
http://www.yahoo.com/r/hs
16 years, 4 months
- 3
- 2
libx264.so.56, where art thou?
by David Kramer
I'm trying to get DVD and MP3 playing happening on my new f8 install.
I have both working with mplayer, but mplayer doesn't appear to be
able to navigate DVD menus. I'm trying to install xine nonfree, because
I know xine can do DVD menus. When trying to install the xine nonfree
package, or vlc, I get
"Missing Dependency: libx264.so.56 is needed by package ffmpeg-libs"
I've tried coming at it from a couple of different angles. How can I
get around this?
Thanks.
16 years, 4 months
- 3
- 2
regarding attachement size
by Ritesh Yeole
Dear All,
I have fedora 4 installed and configure the postfix on that
now i want to increase the size of attachement that limits upto
2 MB. Plz give me the solutions
Thanks & Regards
Ritesh
16 years, 4 months
- 4
- 3
Firefox, mutt, kicker, konsole crash after FC8 update
by M. Fioretti
Greetings,
this is on an AMD64 system, FC8 64bit installed with Livna nVidia
rpms, all updates with yum applied without problems until one week
ago, running KDE.
Last wednesday I go t the "updates available" notification on the
desktop and told the system to upgrade. IIRC, there was some problem
to download the evolution rpm, but I didn't bother since I never use
it, so I told it to go ahead and update. Everything seemed to go fine,
but then:
Firefox would crash or freeze
Konqueror wouldn't start
mutt ran in konsole would segmentation fault every 5/6 messages
yesterday morning, when I powered the PC up again, it failed to boot and
left me with the prompt from which to boot and run fsck
I did, and I noticed it reported several "multiply-claimed blocks in inode"
warnings about:
/usr/lib64/libkgroupwarebase.so.0.0.0
/usr/lib/libkabinterfaces.so.1.0.0
/user/lib/64/kde3/libkontact-kaddressbookplugin.so
after running fsck and rebooting, the problems above seemed
disappeared. Now, after powering up the pc again (KDE session,
again):
X starts, kicker, kmail and konsole crash every time (I'm typing this
from mutt in an xterm which I started from the "run command" graphic
utility)
if I start kicker from the xterm I get:
[marco@pc ~]$ QGDict::hashAsciiKey: Invalid null key
kicker: crashHandler called
KCrash: Application 'kicker' crashing...
QGDict::hashAsciiKey: Invalid null key
trying to start kmail:
> kmail
kmail: relocation error: /usr/lib64/libkleopatra.so.1: symbol _ZN4Kleo18KeySelectionDialogD1Ev, version GLIBCXX_3.4 not defined in file libstdc++.so.6 with link time reference
kate and konqueror, instead, start without problems (though I haven't
done anything with them yet)
Unfortunately, I had no possibility since wednesday to stay at the
computer more than a few minutes every time (if I had had more time
and concentration I would have probably done things differently), and
at this point, given the sequence of events (update partly failed -
forced fsck - another update) I am not sure how to:
- find out _EVERYTHING_ wrong in the system right now (hanging lock or
tmp files, all corrupted binaries, which rpms should be reinstalled,
what else).
- what else to report to help you diagnose the problem
- how to fix it! If I were sure only one package is corrupted, I'd
remove it ignoring warnings and reinstall it right away, but this is
something more serious. Remove all packages updated since wednesday
and then run yum update again?!? No, unless I have confirmation it
makes sense and/or there is no other way
Thank you in advance for any feedback
Marco
--
Your own civil rights and the quality of your life heavily depend on how
software is used *around* you: http://digifreedom.net/node/84
16 years, 4 months
- 5
- 10