Re: IPv6 and localhost
by Allen Kistler
Bill Davidsen <davidsen(a)tmr.com> wrote:
> "Wolfgang S. Rupprecht" <wolfgang rupprecht+gnus200901 gmail com>
>> Allen Kistler <an037-ooai8(a)yahoo.com> writes:
>>>
>>> So the question really is: Is there a reason localhost is not both
>>> the IPv4 loopback and the IPv6 loopback (*other* than hiding some bugs
>>> in some programs)? Or should Fedora (and eventually Red Hat) change
>>> the default /etc/hosts shipped/created with anaconda?
>>
>> One of the first things I do on an install is get rid of the lame
>> distribution /etc/hosts file. I've done this since fc4 and fedora,
>> just like netbsd and openbsd has no need for the silly targeted
>> localhost names. The other silly thing is the "localhost.localdomain"
>> entry coming first. Really, what is that about??? "localhost" has
>> worked just fine for over 2 decades. Software understands it. What
>> advantage is there to rocking the boat?
>
> Using the hosts file for the local name and the names of a few useful hosts is
> protection against some fascist ISP deciding to block or DNAT all DNS queries to
> the ISP servers. So they can block lookup of sites they deem harmful.
I'm not certain I follow how the ISP gets involved with the definition
of localhost in /etc/hosts, but I haven't seen any reason not to call
the lack of an IPv6 definition for localhost (specifically not
"localhost6") a bug and to try to get it fixed.
My inclination is to file a bug against the F11 alpha when it comes out
next week, since it's anaconda that creates the default file content. I
expect some resistance to change, but I can only hope that BZ doesn't
become the venue of a debate on it, though.
15 years, 4 months
Slooooow USB key speeds
by Ranbir
Hi All,
I have a Kingston 8G DataTraveler USB stick. When I plug it into one of
the USB 2.0 ports on my Fedora 10 PC (x86_64), the kernel detects it,
and after some magic, Gnome mounts it on my desktop - everything is
honkey dorey.
When I use Nautilus to copy files to it (say a 1 GB movie file), the
transfer speed begins in the 20 MBps range, but quickly drops to 1.5
MBps or less. Obviously, this increases transfer time exceptionally,
essentially rendering the USB stick useless.
I've tried reformatting (as vfat) the stick, deleting and recreating the
partition on it, all several times and to no avail.
The same stick works just fine on my HP Compaq nx7400 Fedora 10 laptop.
I now assume something is either amiss with my PC, or there's a bug
somewhere in Fedora 10 killing USB performance. I've tried searching
for both, but I've come up up with nada.
My PC has an Asus P5Q-E motherboard, an Intel E8400, and 4 GB of RAM. Is
there something about this combination of hardware (don't forget the USB
stick) when used in conjunction with the x86_64 version of Fedora 10,
leads to shitty USB performance?
Regards,
Ranbir
--
Kanwar Ranbir Sandhu
Linux 2.6.27.9-159.fc10.x86_64 x86_64 GNU/Linux
16:15:12 up 11 days, 20:31, 4 users, load average: 1.25, 0.83, 0.40
15 years, 4 months
Poor WiFi Performance
by Phil Bieber
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi everybody!
I've recently switched from Ubuntu to Fedora 10 to escape a nasty
problem I'm having but without luck.
I have a DELL Inspiron 640m / e1405 notebook based on a Centrino
chipset with an Intel 3945abg WiFi card and my network connection is
painfully slow. I have a 16MBit/s ADSL connection (according to the
router 14069 kbit/s down and 1189 kbit/s up) and when trying a speed
test I get the following results with Epiphany on Fedora 10:
Down: 200 - 250 kbit/s
Up: 60-80 kbit/s
With Internet Explorer 7 on Windows I get the following:
Down: 7500 - 9700 kbit/s
Up: ~1100 kbit/s
I tried it 3 times on both OS's and within about 10 minutes. The
results from my Fedora tests are way better than expected, because it
sometimes takes up to 5 minutes to open google...
The WiFi network I'm connected to is a WPA encrypted G network with
the AP about 5 meters away from my notebook.
I already did some googling but so far I haven't sound anything that
helped. I even tried the Windows drivers using ndsiwrapper but I
couldnt get them to load properly.
The following is the output from lspci:
[root@hekate ~]# lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML
and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS,
943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME,
943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High
Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 2 (rev 01)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 4 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
UHCI Controller #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
UHCI Controller #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2
EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface
Bridge (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family)
SATA IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
02:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
02:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller
02:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro
Host Adapter (rev 19)
02:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host
Adapter (rev 0a)
02:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05)
0c:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG
Network Connection (rev 02)
[root@hekate ~]#
I would greatly appreciate any help you can give me!
Thanks in advance
Phil Bieber
- --
Monday is an awful way to spend 1/7th of your life.
Atheism is a non-prophet organization.
GPG KEY ID (Philipp Bieber): 0x0185E301
FINGERPRINT: CA81 28C2 E63F DAF8 5ED4 DACB 7C26 EE5B 0185 E301
Philipp Bieber - philbieber(a)gmail.com
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)
Comment: Use GnuPG with Firefox : http://getfiregpg.org (Version: 0.7.1)
iEYEARECAAYFAkl8xBMACgkQfCbuWwGF4wG+MQCfXMUrOTNIt6T+wMt92nrmy/mT
S/8AoL7GiniAFIVDnFcY3AAcNKffiPCv
=Yp8J
-----END PGP SIGNATURE-----
15 years, 4 months
Preupgrade failure
by Timothy Murphy
I've been trying to upgrade a Thinkpad T23 (ie very ancient) laptop
from Fedora-9 to Fedora-10 by running preupgrade.
The first stage - downloading the RPMs, etc - works fine,
and when I re-boot the install.img gets downloaded OK.
But then I get an error message suggesting that I "Try re-load".
I've repeated the process 3 or 4 times without success.
Fortunately, the old Fedora-9 system still seems to work fine.
I vaguely recall reading about some magic formula
that I can add to the Fedora-10 install entry in grub.conf ,
but have not been able to find this with google.
15 years, 4 months
Where are the latest updates??
by Heiko Adams
Hello,
on 29th January the fedora-package-announce list has announced several
package-updates for fedora 10.
But since today (31th January) yum didn't find any of these updates in
the updates repository. Normally all announced updates are at least on
the next day available.
--
Regards
Heiko Adams <heiko.adams(a)mymail.ch>
15 years, 4 months
How does sudo work these days in F10 ?
by linux guy
How does sudo work these days in F10 ? Why isn't this asking me for the
root password ?
$ sudo chown xxx /proc/bus/usb/007/002
[sudo] password for xxx:
Thanks
15 years, 4 months
Radio suddenly appears.
by Aaron Konstam
I sat down to read my mail. Suddenly when I open firefox I get a radio
broadcast in Spanish. It lasted for 10 minutes no matter what web
location I was at, then suddenly it stopped.
Any explanations out there.
--
=======================================================================
I might have gone to West Point, but I was too proud to speak to a
congressman. -- Will Rogers
=======================================================================
Aaron Konstam telephone: (210) 656-0355 e-mail: akonstam(a)sbcglobal.net
15 years, 4 months
Understanding the mystery of printing?
by Tom Horsley
I just got a new HP Photosmart C5580 which can (among other things)
print on inkjet printable DVDs and CDs. My current goal (probably
hopeless :-) is to tweak the .ppd file for the copy of the printer
I made which defaults to the DVD tray and DVD paper size so that
any application I care to print from will print in the middle
of the DVD (a quest that will probably take years and cost
thousands of lives :-).
My first big mystery came with sample printouts I made of a
hashmark pattern I could use to measure how far off from the
center I am: Both inkscape and gimp print the pattern with
the exact same offsets from the center of the CD, but open
office prints with a completely different offset.
As near as I can tell, I've told every app the page size is
the same and there are no margins. They all print the marks
scaled the same with the same distance between marks, so
does anyone have any clue why open office thinks the center
of the media is in a different place? Is there some obscure
printer setup option I missed somewhere in OO?
Even if I can figure how to tweak the .ppd file, it won't
do much good if different applications use it a different way :-).
15 years, 4 months
Where to get the java plugin for F10. I'm using F9
by Nigel Henry
Where do I get the java plugin from for F10. I'm using F9, but have problems
with some java sites, and believe that the F10 version of the plugin resolves
these problems.
I've already tried altering my sources list in apt to the F10 everything repo,
but am getting parsing errors, which is annoying to say the least.
All I want to do is download an rpm for the the java plugin for F10, but can't
find it anywhere. and I have tried google, but that's a waste of time.
A link would be helpfull, and I'd be most gratefull for that.
Nigel.
15 years, 4 months