Re: Errors compiling
by Frank McCormick
On 6/23/20 10:10 PM, Qiyu Yan wrote:
> You need to install devel packages (e.g. openssl v.s. openssl-devel)
>
> And when dealing with pkg-config, there is a more convenient way:
> sudo dnf install 'pkgconfig(package-name)'
> pkgconfig(foo) is the devel-files for package foo.
>
> This case you need things like
> sudo dnf install 'pkgconfig(fontconfig)' and so on.
>
Great tip. Thanks
3 years, 10 months
Re: Errors compiling
by Frank McCormick
On 6/23/20 10:01 PM, Ed Greshko wrote:
> On 2020-06-24 09:56, Frank wrote:
>> I am trying to compile/install IceWm for my Fedora 32 installation. Ran into some problems I have resolved, but
>> I am stumped by these:
>>
Snipped
>> What am I missing ?
>
> Is there any reason you don't wish to use
>
> Name : icewm
> Version : 1.6.6
> Release : 1.fc32
> Architecture : x86_64
> Size : 1.2 M
> Source : icewm-1.6.6-1.fc32.src.rpm
> Repository : updates
> Summary : Window manager designed for speed, usability, and consistency
>
> from the Fedora repos?
>
>
More as an exercise than anything else. I have been running the Fedora
version for a while but I don't like the bells and whistles someone has
added. For other users YMMV.
Frank
3 years, 10 months
Gjots2 installation issues on F32
by Frederic Muller
Hi!
Opened a bug report in the Gjots2 bug tracker but didn't receive a
response yet. So apparently the package has been upgraded (since v3.1.0)
to use Python3 and PyGObject for GTK-3, and is actively maintained,
which is great.
I am using Gjots2 to store my passwords, using PGP encryption and not
being able to install it is a bit of an issue.
So when downloading the latest rpm from sourceforge
(v3.1.6-1.fc31.noarch.rpm) I am getting the following errors when
installing:
Problem: conflicting requests
- nothing provides python(abi) = 3.7 needed by gjots2-3.1.6-1.fc31.noarch
Any idea how to resolve this?
Thank you.
Fred
3 years, 10 months
Errors compiling
by Frank
I am trying to compile/install IceWm for my Fedora 32 installation. Ran
into some problems I have resolved, but
I am stumped by these:
checking for strlcat... no
checking for C++11 by default... yes
checking for CORE... no
configure: error: Package requirements (fontconfig xrender xcomposite
xdamage xfixes xext x11) were not met:
Package 'xdamage', required by 'virtual:world', not found
Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.
DNF tells me all these programs are installed along with their
development files.
What am I missing ?
3 years, 10 months
what was that on f30 ??
by Jack Craig
yesterday, something came on screen asking for a repo update & authorised
access.
seems to have broken repo access, any insights??
3 years, 10 months
Starting and stopping RAID doesn't work from Cron
by Patrick O'Callaghan
I have a backup script (using Borgmatic) I run every night, where the
target is a RAID1 array connected by a USB dock. The dock is normally
off so the script turns it on, does the backup, then turns it off
again. This is the cron entry:
# cat /etc/cron.d/borgmatic
# Run borgmatic every day at 3am
0 3 * * * root /usr/local/bin/dock up && /usr/bin/borgmatic ; /usr/local/bin/dock down
The on/off script (see attached) works reliably when run from the
command line, but fails when run via cron. The journal shows the
following:
Jun 21 03:00:01 Bree CROND[25480]: (root) CMD (/usr/local/bin/dock up && /usr/bin/borgmatic ; /usr/local/bin/dock down)
Jun 21 03:00:01 Bree kernel: scsi 6:0:0:0: Direct-Access ASMT ASM1156-PM 0 PQ: 0 ANSI: 6
Jun 21 03:00:01 Bree kernel: sd 6:0:0:0: Attached scsi generic sg4 type 0
Jun 21 03:00:01 Bree kernel: sd 6:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
Jun 21 03:00:01 Bree kernel: sd 6:0:0:0: [sdd] 4096-byte physical blocks
Jun 21 03:00:01 Bree kernel: scsi 6:0:0:1: Direct-Access ASMT ASM1156-PM 0 PQ: 0 ANSI: 6
Jun 21 03:00:01 Bree kernel: sd 6:0:0:0: [sdd] Write Protect is off
Jun 21 03:00:01 Bree kernel: sd 6:0:0:0: [sdd] Mode Sense: 43 00 00 00
Jun 21 03:00:01 Bree kernel: sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun 21 03:00:01 Bree kernel: sd 6:0:0:1: Attached scsi generic sg5 type 0
Jun 21 03:00:01 Bree kernel: sd 6:0:0:0: [sdd] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
Jun 21 03:00:01 Bree kernel: sd 6:0:0:1: [sde] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
Jun 21 03:00:01 Bree kernel: sd 6:0:0:1: [sde] 4096-byte physical blocks
Jun 21 03:00:01 Bree kernel: sd 6:0:0:1: [sde] Write Protect is off
Jun 21 03:00:01 Bree kernel: sd 6:0:0:1: [sde] Mode Sense: 43 00 00 00
Jun 21 03:00:01 Bree kernel: sd 6:0:0:1: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun 21 03:00:01 Bree kernel: sd 6:0:0:1: [sde] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
Jun 21 03:00:06 Bree kernel: sd 6:0:0:0: [sdd] Attached SCSI disk
Jun 21 03:00:07 Bree kernel: sd 6:0:0:1: [sde] Attached SCSI disk
Jun 21 03:00:07 Bree udisksd[961]: Error reading sysfs attr `/sys/devices/virtual/block/md127/md/degraded': Failed to open file “/sys/devices/virtual/block/md127/md/degraded”: No such file or directory (g-file>
Jun 21 03:00:07 Bree kernel: md/raid1:md127: active with 2 out of 2 mirrors
Jun 21 03:00:07 Bree udisksd[961]: Error reading sysfs attr `/sys/devices/virtual/block/md127/md/sync_action': Failed to open file “/sys/devices/virtual/block/md127/md/sync_action”: No such file or directory (>
Jun 21 03:00:07 Bree udisksd[961]: Error reading sysfs attr `/sys/devices/virtual/block/md127/md/sync_completed': Failed to open file “/sys/devices/virtual/block/md127/md/sync_completed”: No such file or direc>
Jun 21 03:00:07 Bree udisksd[961]: Error reading sysfs attr `/sys/devices/virtual/block/md127/md/degraded': Failed to open file “/sys/devices/virtual/block/md127/md/degraded”: No such file or directory (g-file>
Jun 21 03:00:07 Bree udisksd[961]: Error reading sysfs attr `/sys/devices/virtual/block/md127/md/sync_action': Failed to open file “/sys/devices/virtual/block/md127/md/sync_action”: No such file or directory (>
Jun 21 03:00:07 Bree udisksd[961]: Error reading sysfs attr `/sys/devices/virtual/block/md127/md/sync_completed': Failed to open file “/sys/devices/virtual/block/md127/md/sync_completed”: No such file or direc>
Jun 21 03:00:07 Bree kernel: md127: detected capacity change from 0 to 1000069595136
Jun 21 03:00:07 Bree kernel: md127: p1
Jun 21 03:00:07 Bree systemd[1]: Condition check resulted in Software RAID monitoring and management being skipped.
Jun 21 03:00:07 Bree systemd[1]: Condition check resulted in Software RAID monitoring and management being skipped.
Jun 21 03:00:31 Bree kernel: sd 6:0:0:0: [sdd] Synchronizing SCSI cache
Jun 21 03:00:31 Bree kernel: md/raid1:md127: Disk failure on sdd, disabling device. <---------------------------------*
md/raid1:md127: Operation continuing on 1 devices.
Jun 21 03:00:31 Bree kernel: sd 6:0:0:1: [sde] Synchronizing SCSI cache
Jun 21 03:00:31 Bree udisksd[961]: Unable to resolve /sys/devices/virtual/block/md127/md/dev-sde/block symlink
Jun 21 03:00:31 Bree udisksd[961]: Unable to resolve /sys/devices/virtual/block/md127/md/dev-sdd/block symlink
Jun 21 03:00:31 Bree udisksd[961]: Unable to resolve /sys/devices/virtual/block/md127/md/dev-sde/block symlink
Jun 21 03:00:31 Bree udisksd[961]: Unable to resolve /sys/devices/virtual/block/md127/md/dev-sdd/block symlink
Jun 21 03:00:31 Bree kernel: md: super_written gets error=10
Jun 21 03:00:31 Bree kernel: md127: detected capacity change from 1000069595136 to 0
Jun 21 03:00:31 Bree kernel: md: md127 stopped.
The script's own log shows it timing out after 30 seconds. The marked
line never happens when the script is run directly. Neither do any of
the other error messages.
Any ideas?
poc
3 years, 10 months
Audacity can't play audio on Fedora 32
by Sreyan Chakravarty
Hi,
Audacity is unable to play any sort of audio in Fedora 32 on my HP
Notebook.
I installed Audacity from Gnome Software so pretty sure it is a FlatPak.
Whenever I hit the play button I get:
"Error opening sound device.
Try changing the audio host, playback device and the project sample rate."
I did ask the guys over at the Audacity Forums, but they were, lets say,
less than helpful.
You can find the full details of my thread here:
https://forum.audacityteam.org/viewtopic.php?p=395574
The sound devices listed in Audacity are:
* HDA Intel PCH: HDMI 0 (hw:0.3)
* HDA Intel PCH: HDMI 1 (hw:0.7)
* HDA Intel PCH: HDMI 2 (hw:0.8)
* HDA Intel PCH: HDMI 3 (hw:0.9)
* HDA Intel PCH: HDMI 4 (hw:0.10)
* hdmi
And you can find my "Audio Device Info" from Audacity over here:
https://pastebin.com/raw/icDNX20x
So far no other application has given me any issues with sound, Firefox,
VLC, Rhytmbox all work fine. Its only Audacity that is the oddball.
Since the people at Audacity don't know what is going on, I am asking
you guys.
Let me know if any further diagnostic info is required.
Thanks.
--
Regards,
Sreyan
3 years, 10 months
lgrenc.def
by Patrick Dupre
Hello,
Is there a package which provide lgrenc.def?
dnf repoquery --whatprovides 'lgrenc.def'
did not offer me any thing.
Thank.
===========================================================================
Patrick DUPRÉ | | email: pdupre(a)gmx.com
Laboratoire interdisciplinaire Carnot de Bourgogne
9 Avenue Alain Savary, BP 47870, 21078 DIJON Cedex FRANCE
Tel: +33 (0)380395988
===========================================================================
3 years, 10 months
migrating drives on UEFI systems
by Tim
Hi,
On the old BIOS systems, if I wanted to swap hard drives on a system
(e.g. move over to a bigger one), I could clone it off-line, then swap
over, and it'd just work.
Should I expect a UEFI system to do it that simply?
And do secure boot options throw any spanners in the works, too?
I tried this last night, and it didn't want to boot. I cloned it using
"dd if=/dev/sda of=/dev/sdb" while booted from a gparted ISO on a USB
flashdrive (current release). Shut down. Unplugged the old drive.
Rebooted.
If it makes any difference, I can't recall if I plugged it into the
same SATA port on the motherboard. It's a board with 6 sockets, and
I'm only using two of them (DVD and HDD).
I did get it to boot by messing with the boot menus in UEFI, but it was
quite hit-and-miss about what to boot from. I can't remember now if I
selected the drive with it on, or the entry with the release's name in
it, but neither worked on the first boot. It was a few reboots before
I got it to go.
--
uname -rsvp
Linux 3.10.0-1127.10.1.el7.x86_64 #1 SMP Wed Jun 3 14:28:03 UTC 2020 x86_64
Boilerplate: All unexpected mail to my mailbox is automatically deleted.
I will only get to see the messages that are posted to the mailing list.
3 years, 10 months
DNF Error with package Conflicts.
by Stephen Morris
Hi,
When I did a dnf upgrade today I got the following messages at the
beginning of dnf output.
Error:
Problem: cannot install the best update candidate for package
qt5-qtbase-5.13.2-5.fc32.x86_64
- problem with installed package qt5-qtbase-5.13.2-5.fc32.x86_64
- cannot install the best update candidate for package
qgis-3.12.3-1.fc32.x86_64
- problem with installed package qgis-3.12.3-1.fc32.x86_64
- package qgis-3.12.3-1.fc32.x86_64 requires
libQt5Core.so.5(Qt_5.13.2_PRIVATE_API)(64bit), but none of the providers
can be installed
- package qgis-3.12.3-1.fc32.x86_64 requires
libQt5Sql.so.5(Qt_5.13.2_PRIVATE_API)(64bit), but none of the providers
can be installed
- cannot install both qt5-qtbase-5.14.2-5.fc32.x86_64 and
qt5-qtbase-5.13.2-5.fc32.x86_64
- cannot install both qt5-qtbase-5.13.2-4.fc32.x86_64 and
qt5-qtbase-5.14.2-5.fc32.x86_64
Is this because qt5-qtbase-5.14.2-5.fc32.x86_64 doesn't supercede
qt5-qtbase-5.13.2-4.fc32.x86_64?
regards,
Steve
3 years, 10 months
