External usb drive -
by Bob Goodwin
I have an external 4TB drive with some files stored on it that I want to
keep. I would like to connect it to the port provided on an ASUS router
which will replace the one in service now. It appears that accomplishing
that requires that the drive contain a samba share? This is an FC32
system using xfce, I dnf installed Samba. What do I need to do to make
the external drive accessible as a samba share if that is what it
requires? My effort with google has not helped ... Bob
--
Bob Goodwin - Zuni, Virginia, USA
http://www.qrz.com/db/W2BOD
FEDORA-32/64bit LINUX XFCE Fastmail POP3
3 years, 10 months
Random crashes/reboots under F32
by Justin Moore
About four weeks ago I upgraded from F30 to F32. I've been using this same
hardware for a few years now, and it worked fine* under multiple versions
of Fedora.
However since I upgraded to F32 I've been finding my system randomly
rebooting about every 8-14 days. I'll just come back to it and it'll be
sitting at the encrypted partition unlock screen. When I check system logs
(journalctl -b [bootID] -r) there's no indication that something went
horribly wrong. No error messages, no nothing. It's just fine until I'm
staring at a reboot screen.
It hasn't (yet) happened while I've been sitting at the computer so I can't
tell if it's a clean shutdown or a hard reboot. Googling for "fedora" or
"F32" and "random reboots" or "random crashes" doesn't bring up anything
particularly helpful.
Tips? Suggestions?
Thanks in advance.
-justin
*Standard disclaimer about things like systemd and journalctl being an
absolute dumpster fire
3 years, 10 months
cinnamon restart
by José Artemio
hello, I would like to know how to report a problem, in cinnamon when
using the restart function the system crashes and that's it!
3 years, 10 months
Issue upgrading f31 to f32.
by Erik P. Olsen
After dnf system-upgrade download --releasever=32 I get the following error:
the file /usr/include/mysql/mariadb_rpl.h makes conflict between the attempted
installation of mariadb-devel-3:10.4.12-3.fc32.x86_64 and mariadb-connector-c-devel-3.1.8-1.fc32.x86_64
The original error message was in Danish but I have attempted to translate it as well as I could. I hope it is understood.
What can I do about it? --allowerasing and --skip-broken do not help.
Thanks in advance.
--
Erik P. Olsen - Copenhagen, Denmark
Fedora 31/64 bit Linux xfce Claws-Mail POP3 Gramps 5.1.2 Bacula 9.4.4
3 years, 10 months
flatpak question
by David
I have never seen this before. I just updated, but have not rebooted
( I am in Rawhide )
[david@localhost ~]$ sudo flatpak update
[sudo] password for david:
Looking for updates…
Login required remote fedora (realm https://registry.fedoraproject.org/
)
User:
3 years, 10 months
Microphone trouble
by Joe Zeff
My laptop is running F 31 and Xfce, fully updated. I'm trying to use
Zoom to participate in meetings of a club I belong to but am having
trouble with the microphone. If I use a headset and mic, I can usually
hear OK, but nobody can understand what I'm saying. If I use the
internal speakers and mic, the sound is sometimes OK, sometimes not.
However, I'm told that there's so much static from my mic that the host
mutes me before I can even say one, single word. Does anybody have an
idea as to how to correct this without throwing money at it? Buying a
new mic right now is out of the question, especially as I can't try it
before I buy it.
3 years, 10 months
frama-c can't start up on simple example
by Richard W.M. Jones
I was trying to run through the tutorial here:
https://allan-blanchard.fr/publis/frama-c-wp-tutorial-en.pdf
The first example on page 15 & 16 fails with:
[wp] Running WP plugin...
[wp] User Error: Prover 'alt-ergo' not found in why3.conf
I couldn't get any further. What I tried was:
- Install both why3 and alt-ergo. Why aren't they deps of frama-c?
- Run /usr/lib64/why3/commands/why3config by hand (why isn't it in
/usr/bin?), which creates $HOME/.why3.conf
- stracing the program, it seems like it never attempts to
open or run anything to do with alt.*ergo
~/.why3.conf contains:
----------------------------------------------------------------------
[detected_prover]
exec_name = "alt-ergo"
version = "2.0.0"
[detected_prover]
exec_name = "coqtop"
version = "8.11.2"
[main]
default_editor = "emacs -nw %f"
magic = 14
memlimit = 1000
running_provers_max = 2
timelimit = 5
----------------------------------------------------------------------
$ rpm -q why3 frama-c alt-ergo coq
why3-1.3.1-10.fc33.x86_64
frama-c-21.0-2.fc33.x86_64
alt-ergo-2.0.0-15.fc33.x86_64
coq-8.11.2-1.fc33.x86_64
Rich.
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
virt-p2v converts physical machines to virtual machines. Boot with a
live CD or over the network (PXE) and turn machines into KVM guests.
http://libguestfs.org/virt-v2v
3 years, 10 months
kde wayland and hi-dpi
by Neal Becker
Hi, I'm running F32 on a hi-dpi screen, with kde+wayland.
I find I get good results by going to font settings, and choosing Force
dpi, and selecting 120 rather than the default 96. This produces a warning
that the recommended approach is to instead use scaling. If I try scaling
the results look awful, but force dpi seems fine.
Any thoughts?
--
*Those who don't understand recursion are doomed to repeat it*
3 years, 10 months
What the heck does this mean?
by Tom Horsley
I constantly get this nonsense in my logwatch mail:
> **Unmatched Entries**
> crond: pam_systemd(crond:session): Failed to create session: File exists: 1 Time(s)
That apparently corresponds to this entry in /var/log/secure:
Jun 16 08:42:01 tomh crond[25783]: pam_systemd(crond:session): Failed to create session: File exists
And that was apparently generated by this cron job:
Jun 16 08:42:01 tomh CROND[25788]: (tweety) CMD (/usr/bin/fetchmail -s >> $HOME/.fetchmail.log 2>&1)
What in the blue blazes is it talking about? What file already exists?
The fetchmail job runs every minute. Does this happen when the previous
fetchmail cron job hasn't finished yet? It would sure be helpful if
someone mentioned what file it is that already exists :-).
--
Tom Horsley
Delray Beach, FL
Cell: 561-414-9667
3 years, 10 months
systemctl status distccd
by Michael J. Baars
Hi,
Since it's awfully quiet on the initscripts-devel mailing list.
Best regards,
Mischa.
3 years, 10 months
