Jim Cornette escreveu:
david walcroft wrote:
> Jim Cornette wrote:
>
>> david walcroft wrote:
>>
>>> Hi,
>>> I have had a scanning problem since moving up to FC3 from FC2 and
>>> that is it is not identified by gimp,kooka and so on.
>>> ptal-init sets it up and :-
>>>
>>> [david@reddwarf ~]$ sane-find-scanner
>>> found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x2811
>>> [PSC 2100 Series]) at libusb:003:003
>>>
>>> but :
>>>
>>> [david@reddwarf ~]$ scanimage -L
>>> scanimage: hp-option.c:3710: hp_optset_fix_geometry_options:
>>> Assertion `tl_x && tl_y && br_x && br_y' failed.
>>> Aborted
>>>
>>> software is uptodate
>>> [david@reddwarf ~]$ rpm -q hpoj
>>> hpoj-0.91-11
>>> [david@reddwarf ~]$ rpm -qa | grep sane
>>> sane-frontends-1.0.12-4
>>> sane-backends-devel-1.0.14-6
>>> sane-backends-1.0.14-6
>>> xsane-gimp-0.92-13
>>> xsane-0.92-13
>>>
>>> Any ideas anyone....
>>>
>>> Thanks david
>>>
>>
>> Try adding the testing repo to your repositories to get the latest
>> programs. I have an hp 2100 scanner and it seems to work alright in FC3.
>>
>> I'm not sure what the hpoj has to do with the scanner.
>>
>> Jim
>>
>> Refer to below bug report for needed packages.
>>
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=121511
>>
>>
> Jim
> I just added my 2c to the bug as updating to updates-testing
> hasn't worked,hpoj and
> hpijs together handle print and scan requirements.
>
> Thanks david
>
I have a scanner that is seperate. It is not a scanner printer
combination. It is an HP 2100C model flatbed scanner and works fine with
the testing versions of the suggested programs installed.
Since I don't have a combination unit and do not know if there are
seperate usb device nodes for the scanner and another for the printer or
if they use the same usb node for each device. It makes more sense to me
for the devices to have seperate nodes per device. Could it be that the
node for the scanner portion is not being set to the right setting?
sane-backends-1.0.15-1.4
hotplug-2004_04_01-8.1
pam-0.77-66.1
Are the program versions that are supposed to get the permissions setup
correctly? It looks like you have these versions installed from the
addition to the bug report.
Sorry that this remedy couldn't fix your problem. It sounds like hpijs
is not being loaded correctly. You might try searching bugzilla for
multi-function device entries.
Jim
Hi,
I've a HP PSC 1315 and I've installed the HPLIP driver
(
http://hpinkjet.sourceforge.net/index.php), so the scanner works fine
with xsane.
Best regards,
Vinicius.