Boot problem after Kernel upgrade...

I'm just wondering if anyone else has experienced a similar problem and/or if anyone might be able to think of a less "manual" workaround than the one I present toward the bottom of this email. I did the upgrade to the kernel-2.4.22-1.2129 (and associated packages) this morning and encountered a bit of a problem when rebooting the system after the install. When the system gets to the point of trying to fsck the root partition it prints the error "/dev/md1 is mounted. e2fsck cannot continue, aborting" and then drops to the system maintenance prompt. Booting back to the older kernel works fine. I have had this problem in the past with a few Redhat 9 systems in the past as well (and in retrospect probably Redhat 8 as well, but I didn't know it then :-) and have made the following observations... - doesn't on a new installation - doesn't on a system upgrade (ie. RH8 to RH9, RH9 to Fedora1, etc) - does happen the first time you do a kernel upgrade The systems on which I have had this problem have had the following in common... - software raid with more than one partition - disk quota enabled - / partition is entered in fstab with the options exec,dev,suid,rw,usrquota I have found that the workaround to this problem is to change the "exec,dev,suid,rw,usrquota" entry in fstab to "defaults", then run mkinitrd to generate a new initrd and finally set the fstab back to what it was before. After this process everything works just fine (until you do the next kernel upgrade). Obviously it's pretty easy to forget to regenerate an initrd using this process after a kernel upgrade and come back hour s later to find your computer sitting at a "enter root password or Ctrl-D" prompt. Is there any other workaround/solution that will let the kernel install process generate a working initrd instead of having to do it by hand afterwards? Thanks,