Hello,
In conclusion "temporally".
1) I could not boot on the first OS installed because
linux instead of linuxefi
and
initrd instead of initrdefi were used in the menuentry
If seems that moving from fedora 28 to fedora 30,
a) the grub.cfg generated does not keep track
b) acually, the new generation of grub.cfg (after the transition)
does not manage any menuentry.
2) When a grub.cfg is generate with grub2-mkconfig, even if multi
boot are detected (like on 2 different HDs), during the grub menu,
it is only possible to choice the boot kernels from the OS which
has generated the grub.cfg.
3) How to access to the other entries (ie on the OS sitting on the
other HD)? Using efiboofmgr -c
Here is efibootmgr
BootCurrent: 000F
Timeout: 1 seconds
BootOrder: 0008,0007,000F,000B,0000,000A,0011,000C
Boot0000 fedora
Boot0001* UEFI: SK hynix SC311 SATA 512GB
Boot0002* UEFI: General UDisk 5.00
Boot0003* UEFI: General UDisk 5.00
Boot0004 Diskette Drive
Boot0005* USB Storage Device
Boot0006 Onboard NIC
Boot0007 Linux
Boot0008* USB Key
Boot0009* UEFI: SK hynix SC311 SATA 512GB
Boot000A* Diskette Drive
Boot000B fedora rescue
Boot000C* Onboard NIC
Boot000F* Fedora
Boot0011* USB Storage Device
My second disk is not bootable? It is not listed here
systemd-boot not installed in ESP.
System:
Firmware: n/a (n/a)
Secure Boot: disabled
Setup Mode: user
Current Boot Loader:
Product: n/a
Features: ✗ Boot counting
✗ Menu timeout control
✗ One-shot menu timeout control
✗ Default entry control
✗ One-shot entry control
ESP: n/a
File: └─n/a
Available Boot Loaders on ESP:
ESP: /boot/efi (/dev/disk/by-partuuid/0fe1d405-6683-456c-a306-140e882>
File: └─/EFI/BOOT/BOOTIA32.EFI
File: └─/EFI/BOOT/BOOTX64.EFI
Boot Loaders Listed in EFI Variables:
Title: Fedora
ID: 0x000F
Status: active, boot-order
Partition: /dev/disk/by-partuuid/0fe1d405-6683-456c-a306-140e882e322c
File: └─/EFI/fedora/shimx64.efi
Title: fedora
ID: 0x0000
Status: inactive, boot-order
Partition: /dev/disk/by-partuuid/0fe1d405-6683-456c-a306-140e882e322c
File: └─/EFI/fedora/grubx64.efi
Title: UEFI: SK hynix SC311 SATA 512GB
ID: 0x0001
Status: active
Partition: /dev/disk/by-partuuid/0fe1d405-6683-456c-a306-140e882e322c
File: └─/EFI/Ubuntu/shimx64.efi
Title: UEFI: SK hynix SC311 SATA 512GB
ID: 0x0009
Status: active
Partition: /dev/disk/by-partuuid/0fe1d405-6683-456c-a306-140e882e322c
File: └─/EFI/Ubuntu/shimx64.efi
0 entries, no entry could be determined as default.
===========================================================================
Patrick DUPRÉ | | email: pdupre(a)gmx.com
Laboratoire interdisciplinaire Carnot de Bourgogne
9 Avenue Alain Savary, BP 47870, 21078 DIJON Cedex FRANCE
Tel: +33 (0)380395988
===========================================================================