Re: bootstrapping from a USB stick
On Aug 31, 2014, at 9:00 AM, D. Hugh Redelmeier <hugh(a)mimosa.com> wrote:
I have an oldish PC that only understands booting from 512-byte
sectors and then only with MBR disks.
I want to install large new disks on it, and no old disks. These
don't even pretend to do 512-byte sectors: 4k all the way (3T and 4T sizes
aren't good for MBR either).
Uhhh, I haven't seen bare drives in the wild with 4096 byte logical and physical
sectors. What's the model of this drive? I've only seen some USB enclosures that
do this, and present a 4096 byte logical sector: and only then they come with a drive
already in them, they're not empty enclosures. The problem some people have is if the
enclosure craps out they try to recover their data and they're SOL because the
enclosure caused the drive to present 4096 logical sectors, but the drive itself presents
512 byte logical sectors, and the mismatch makes the drive unreadable, unmountable,
because all the reported LBAs are totally wrong. So you have to get a replacement
enclosure… well at least, that's the easiest way to deal with it. Maybe someone could
hack up a way to do the same thing as the enclosure in software with device mapper (?),
that'd be useful.
Old PC's might be OK with GPT so long as there's also a protective MBR. By default
anaconda/blivet (the Fedora installer), creates a protective MBR, but also sets a
non-standard flag its 0xEE entry that tricks most computer BIOS into accepting GPT. But
there are quite a few BIOS that will just face plant. So you have to test it to know for
sure.
I was thinking that I should be able to use a USB flash memory stick
as the boot device, loading GRUB from there, and then having it boot
the OS from a big GPT hard disk. The stick would be permanently
plugged in.
Is there any reason that this might not work? Is there a better way?
You could try the above. If not then fall back to your idea. At install time, choose both
flash drive and hard drive as installation destinations. Put the /boot mount point on the
flash drive, and everything else on the hard drive.
Are there special GRUB modules that I need to convince GRUB's
installer to put on the USB stick?
No. grub2-install will figure this out, anaconda has already mounted the system as it will
be used, and has written an fstab that describes how it's to be mounted, and
grub2-install reads that and figures out that the flash drive with /boot on it should
receive grub's core.img embedded in the MBR gap. Once that core.img is read, the BIOS
is out of the picture.
What filesystem type is best for the USB stick? My guess: ext4 is
fine.
Doesn't really matter it's mainly read-only. It'll only be written to when
doing kernel updates.
Chris Murphy