vamythguy wrote:
I have a RAID-5 array with four SATA disks in it. Apparently, two
are
going
bad, so I want to replace them. But, I'm not sure which physical
drives to
pull. Given the following:
cat /proc/mdstat
Personalities : [raid6] [raid5] [raid4]
md0 : active raid5 sda[0] sdd[3] sdc[2] sdb[1]
735351936 blocks level 5, 64k chunk, algorithm 2 [4/4] [UUUU]
Any suggestions?
Odd that you have the raid4 and raid6 modules loaded, but still
unfamiliar with /proc/mdstat...
Anyways, you are showing an array with four working disks; none failed.
If you had a failed drive, it might look like [U_UU] which would mean
the second disk had failed.
../C