On Tue, 19 Feb 2019 at 02:50, Sudheer Satyanarayana < sudheer(a)techchorus.net
wrote:
Hello,
I have installed Fedora 29 on Lenovo W540. The laptop overheats up soon
after booting.
You should make sure there isn't an accumulation of dust preventing proper
cooling. At
my work there were a bunch of Lenovo's that would overheat and crash. A
good blast of
canned air in the vents would release a cloud of dust and restore proper
operation. This
had to be done every few months (typical cubicle farm environment).
Have a look at
https://forums.lenovo.com/t5/ThinkPad-P-and-W-Series-Mobile/W540-very-hot...
which implicates spectre mitigations in BIOS, and
https://itsfoss.com/reduce-overheating-laptops-linux/
A couple years ago at work we were assigned a high-end Dell workstation
that had been running
Ubuntu. On boot the fans ran at full speed for a few seconds before the
UPS reported "overload"
and shut down. On investigation, I found the system had been configured
as a node in a big distributed
numerical model that started at boot (24 cores, 48 threads).
After removing the model the system booted and ran normally, but still had
high fan noise
and power consumption at startup. After updating the kernel the startup
became less violent.
We didn't want the numerical model, but the system gave us no further
problems running
other heavy processing.
Power management tricks have been used to prevent overheating under heavy
workloads. I'm
not sure what CPU intensive code might be run when the kernel boots, and
when the various power
management tools kick in.
--
George N. White III