On 03/30/2011 10:39 AM, Kevin J. Cummings wrote:
On 03/30/2011 01:15 PM, JD wrote:
>> I suspect you have something mis-configured, but I have no clue as to
>> what right now.
> But I did not change any configuration between fc13 and fc14.
Nor did I, but I had *lot's* of problems initially with my working
F12/F13 configuration after I switched to F14. Mostly due to changes in
the ati driver.
1) I used to have to turn off KMS in order for suspend to work right.
With F14, I had to not disable it in order to prevent a whole list of
video problems, including text consoles being corrupt, X hanging
completely when it started using the ati driver (I had to use vesa to
even boot up using UMS). I was finally convinced that by enabling KMS,
things would start working again, and they did, but there was nothing in
the upgrade that suggested doing so was the right thing to do.
What is KMS and how do I enable it?
2) I had all sorts of problems with the xorg configuration file. I
had
a *very* complicated one because I had changed it continually since FC6.
Once I removed most of it, things vastly improved. Its probably a good
idea anyways since the advent of the /etc/x11/conf.d stuff. YMMV
/etc/X11/xorg.conf.d only contains 00-system-setup-keyboard.conf
(/etc/X11/xorg.conf), I do not see KMS in there at all. How would I
enable it?
So, it might me a good idea to list any anomalies with your
configuration, from kernel boot parameters, to xorg.conf stuff so that
we can see if you are doing anything that might now be considered
problematic. Also, if you could re-state what your ATI hardware is,
that could be helpful as well. Is this a desktop or laptop?
From lspci:
01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility
Radeon 9600 M10]
From /boot/grub/grub.conf:
title Fedora (2.6.35.6-45.fc14.i686)
root (hd0,1)
kernel /boot/vmlinuz-2.6.35.6-45.fc14.i686 ro
root=UUID=99c4a1b1-99c2-40e6-8d2c-44bba67ad7df nomodeset
SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 KEYTABLE=us
initrd /boot/initramfs-2.6.35.6-45.fc14.i686.img
And finally /etc/X11/xorg.conf
# ls -l /etc/X11/xorg.conf
-rw-r--r--. 1 skroot root 4978 Mar 27 18:07 /etc/X11/xorg.conf
As you can see from the date, it was touched during the upgrade to fc14.
# cat /etc/X11/xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "catalogue:/etc/X11/fontpath.d"
FontPath "built-ins"
EndSection
Section "Module"
Load "record"
Load "extmod"
Load "dri2"
Load "dbe"
Load "glx"
Load "dri"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "Protocol" "Standard"
Option "XkbLayout" "us"
Option "XkbRules" "xfree86"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 24.0 - 85.0
VertRefresh 48.0 - 76.0
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>:
"True"/"False",
### <string>: "String", <freq>: "<f>
Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # <i>
#Option "AGPMode" # <i>
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # <i>
#Option "GARTSize" # <i>
#Option "RingSize" # <i>
#Option "BufferSize" # <i>
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # <i>
#Option "DepthBits" # <i>
#Option "PCIAPERSize" # <i>
#Option "AccelDFS" # [<bool>]
#Option "IgnoreEDID" # [<bool>]
#Option "CustomEDID" # [<str>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "ColorTiling" # [<bool>]
#Option "VideoKey" # <i>
#Option "RageTheatreCrystal" # <i>
#Option "RageTheatreTunerPort" # <i>
#Option "RageTheatreCompositePort" # <i>
#Option "RageTheatreSVideoPort" # <i>
#Option "TunerType" # <i>
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "ScalerWidth" # <i>
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "ClockGating" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
#Option "DRI" # [<bool>]
#Option "ConnectorTable" # <str>
#Option "DefaultConnectorTable" # [<bool>]
#Option "DefaultTMDSPLL" # [<bool>]
#Option "TVDACLoadDetect" # [<bool>]
#Option "ForceTVOut" # [<bool>]
#Option "TVStandard" # <str>
#Option "IgnoreLidStatus" # [<bool>]
#Option "DefaultTVDACAdj" # [<bool>]
#Option "Int10" # [<bool>]
#Option "EXAVSync" # [<bool>]
#Option "ATOMTVOut" # [<bool>]
#Option "R4xxATOM" # [<bool>]
#Option "ForceLowPowerMode" # [<bool>]
#Option "DynamicPM" # [<bool>]
#Option "NewPLL" # [<bool>]
#Option "ZaphodHeads" # <str>
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "RV350 [Mobility Radeon 9600 M10]"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection