Offline uncorrectable sectors

Sunday, 16 August 2015

Dear All,

I am getting the following warning on a terminal window (F22, :

-------------------------
WARNING: Your hard drive is failing
Device: /dev/sda [SAT], 1 Offline uncorrectable sectors
-------------------------

(Please, find below the output of smartctl -a /dev/sda)

Is that a serious problem? What should I do?

Thanks in advance,

Paul

-------------------------

# smartctl -a /dev/sda
smartctl 6.4 2015-06-04 r4109 [x86_64-linux-4.1.4-200.fc22.x86_64] (local build)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Green
Device Model:     WDC WD20EARX-00PASB0
Serial Number:    WD-WCAZAJ822299
LU WWN Device Id: 5 0014ee 2b260482b
Firmware Version: 51.0AB51
User Capacity:    2,000,398,934,016 bytes [2.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Sun Aug 16 15:36:46 2015 WEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)    Offline data collection activity
                    was completed without error.
                    Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)    The previous self-test
routine completed
                    without error or no self-test has ever
                    been run.
Total time to complete Offline
data collection:         (37500) seconds.
Offline data collection
capabilities:              (0x7b) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine
recommended polling time:      (   2) minutes.
Extended self-test routine
recommended polling time:      ( 361) minutes.
Conveyance self-test routine
recommended polling time:      (   5) minutes.
SCT capabilities:            (0x3035)    SCT Status supported.
                    SCT Feature Control supported.
                    SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE
UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail
Always       -       22
  3 Spin_Up_Time            0x0027   172   165   021    Pre-fail
Always       -       6383
  4 Start_Stop_Count        0x0032   099   099   000    Old_age
Always       -       1446
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail
Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age
Always       -       0
  9 Power_On_Hours          0x0032   089   089   000    Old_age
Always       -       8161
 10 Spin_Retry_Count        0x0032   100   100   000    Old_age
Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age
Always       -       0
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age
Always       -       1446
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age
Always       -       18
193 Load_Cycle_Count        0x0032   136   136   000    Old_age
Always       -       192777
194 Temperature_Celsius     0x0022   116   107   000    Old_age
Always       -       34
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age
Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age
Always       -       1
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age
Offline      -       1
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age
Always       -       0
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age
Offline      -       1

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining
LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      4062         -
# 2  Short offline       Completed without error       00%      4062         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.