Re: New 64-bit Fedora Will Not Mount Similar 32-bit Filesystem
On 11/4/2012 2:07 PM, Reindl Harald wrote:
> As you can see, lsblk displays information about /dev/sdc, and
shows the mount that I did earlier ("mount /dev/sdc1
> /mnt/fedora32"), and shows sdc1 as an ext4 filesystem, but shows nothing about
sdc2 other than that it exists. Any
> suggestions?
so are you sure that the old setup used LVM at all?
Absolutely. I didn't mention this, but during the last several days I've
tried a lot of different things to be able to look at the files on
/dev/sdc, and there were plenty of confirmations of that. Furthermore,
after the 32-bit installation was done, I often looked at the output of
fdisk, and it ALWAYS showed LVM information -- pretty much the same
information as fdisk now shows about the 64-bit installation, except for
differences in the physical attibutes of the hard disks.
you said "/dev/sdc1" looks like /boot of the old install
so i bet /dev/sdc2 is the system-disk and if you did not
have a seperated /home what else do you search?
I don't really understand your question. But when I did fdisk on the
32-bit system (when it was up and running; it's disassembled now),
/dev/sdc1 was always listed as /boot. And /dev/sdc2 was always broken up
into the logical volumes /, swap and /home -- just like the new 64-bit
installation is.
Alan