Odds are with a bit of work you can find the start of the dara and so that
you can mount it. Witb raid1 it should be doable. With raid5/6 you need
to know details about the algorithm used by the card. I think there is a
disk scanning tool that can be used to find the lvm and or fs header and
from that you could use dmsetup to create a device srarting at the right
spot for the header to work (without putting a partition on the device).
I use software raid just so i do not need the same type of raid card to
read it on a new or repaired system
On Fri, Jun 24, 2022, 10:38 AM ToddAndMargo via users <
users(a)lists.fedoraproject.org> wrote:
On 6/24/22 11:16, Mauricio Tavares wrote:
> On Fri, Jun 24, 2022 at 2:10 PM ToddAndMargo via users
> <users(a)lists.fedoraproject.org> wrote:
>>
>> On 6/24/22 10:42, Roger Heflin wrote:
>>> Raid cards of different brands wont typically read each others configs.
>>> So any replacement card would need to be the same card, or maybe just
>>> manufacturer to read the current config and disks.
>>
>>
>> Yikes!
>
> With that said, there are really not many makes of cards. And
> their cards are usually based on the same model. Other cards are
> really not true hardware raid controllers. You can find out by getting
> the model number from lspci.
And there is always Drive Savers
https://drivesaversdatarecovery.com/
_______________________________________________
users mailing list -- users(a)lists.fedoraproject.org
To unsubscribe send an email to users-leave(a)lists.fedoraproject.org
Fedora Code of Conduct:
https://docs.fedoraproject.org/en-US/project/code-of-conduct/
List Guidelines:
https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives:
https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org
Do not reply to spam on the list, report it:
https://pagure.io/fedora-infrastructure