On Wed, 2006-09-20 at 17:57 +0100, James Wilkinson wrote:
You know about the smartctl -l error /dev/hda command, don't you?
That
will show you if the *disk* thinks it needs replacing.
Output below. Do you think this is an avoidable, or unavoidable error?
This is a test box, made from spare parts at zero cost. Yep, the whole
thing was scrounged. Beyond the annoyance of interrupting some
experiments, 100% reliability isn't the absolute top priority. It's
there to try things out. My other PCs are a different matter, I do
spend money on them. I'm not adverse to partitioning around a duff part
of the drive to plod on and see how it goes.
I am amused by the statement about the device was active or idle when
the error occurred. What else could it be? ;-) It sounds a lot like,
"he was breathing, just before he died..."
------------------------------
smartctl version 5.33 [i386-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen
Home page is
http://smartmontools.sourceforge.net/
=== START OF READ SMART DATA SECTION ===
SMART Error Log Version: 1
ATA Error Count: 541 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 541 occurred at disk power-on lifetime: 960 hours (40 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 bd 34 9b e1 Error: UNC 8 sectors at LBA = 0x019b34bd = 26948797
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 bd 34 9b e1 00 00:20:09.950 READ DMA
c8 00 08 b5 34 9b e1 00 00:20:09.950 READ DMA
c8 00 08 ad 34 9b e1 00 00:20:09.950 READ DMA
c8 00 08 a5 34 9b e1 00 00:20:09.950 READ DMA
c8 00 40 05 36 9b e1 00 00:20:09.950 READ DMA
Error 540 occurred at disk power-on lifetime: 960 hours (40 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 67 33 9b e1 Error: UNC 8 sectors at LBA = 0x019b3367 = 26948455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 65 33 9b e1 00 00:20:01.500 READ DMA
ca 00 30 1d 33 9b e1 00 00:20:01.500 WRITE DMA
c8 00 08 5d 33 9b e1 00 00:20:01.500 READ DMA
c8 00 40 c5 34 9b e1 00 00:20:01.500 READ DMA
c8 00 48 bd 34 9b e1 00 00:19:55.650 READ DMA
Error 539 occurred at disk power-on lifetime: 960 hours (40 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 48 bd 34 9b e1 Error: UNC 72 sectors at LBA = 0x019b34bd = 26948797
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 48 bd 34 9b e1 00 00:19:55.650 READ DMA
c8 00 50 b5 34 9b e1 00 00:19:50.100 READ DMA
c8 00 58 ad 34 9b e1 00 00:19:44.000 READ DMA
c8 00 60 a5 34 9b e1 00 00:19:38.300 READ DMA
c8 00 68 9d 34 9b e1 00 00:19:32.700 READ DMA
Error 538 occurred at disk power-on lifetime: 960 hours (40 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 50 bd 34 9b e1 Error: UNC 80 sectors at LBA = 0x019b34bd = 26948797
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 50 b5 34 9b e1 00 00:19:50.100 READ DMA
c8 00 58 ad 34 9b e1 00 00:19:44.000 READ DMA
c8 00 60 a5 34 9b e1 00 00:19:38.300 READ DMA
c8 00 68 9d 34 9b e1 00 00:19:32.700 READ DMA
c8 00 70 95 34 9b e1 00 00:19:26.900 READ DMA
Error 537 occurred at disk power-on lifetime: 960 hours (40 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 58 bd 34 9b e1 Error: UNC 88 sectors at LBA = 0x019b34bd = 26948797
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 58 ad 34 9b e1 00 00:19:44.000 READ DMA
c8 00 60 a5 34 9b e1 00 00:19:38.300 READ DMA
c8 00 68 9d 34 9b e1 00 00:19:32.700 READ DMA
c8 00 70 95 34 9b e1 00 00:19:26.900 READ DMA
c8 00 78 8d 34 9b e1 00 00:19:22.100 READ DMA
--
(Currently running FC4, in case that's important to the thread)
Don't send private replies to my address, the mailbox is ignored.
I read messages from the public lists.