On 10/31/20 11:53 PM, ToddAndMargo via users wrote:
# modprobe -r lp
# modprobe -r parport_pc
# modprobe parport_pc
# modprobe lp
# echo 9710 9900 > /sys/bus/pci/drivers/parport_pc/new_id
But still no lp0 showing in CUPS or Printer Admin (notice
I used the Linux term for it!)
After running the new_id command, do "lspci -k" again and see if it
picked it up. If not, then try "echo 1 > /sys/bus/pci/rescan" and check
again.